Skip to Main Content
ASM Handbook

Welding Fundamentals and Processes

Edited by
T. Lienert
T. Lienert
Search for other works by this author on:
T. Siewert
T. Siewert
Search for other works by this author on:
S. Babu
S. Babu
Search for other works by this author on:
V. Acoff
V. Acoff
Search for other works by this author on:
ASM International
Volume
6A
ISBN electronic:
978-1-62708-174-0
Publication date:
2011
Book Chapter

Procedure Development and Practice Considerations for Inertia and Direct-Drive Rotary Friction Welding[1]

By
Tim Stotler
Tim Stotler
Revising author
Edison Welding Institute
Search for other works by this author on:
Published:
2011
Page range:
641 - 645
Publication history
July 15, 2011

Abstract

This article provides information on the practice considerations for the inertia and direct-drive rotary friction welding processes. It presents the tooling and welding parameter designs of these processes. The article discusses the welding of different material family classes to provide a baseline for initial development of a welding parameter set. Common material family classes, including steels, nonferrous metals, and dissimilar metals, are discussed.

You do not currently have access to this content.
Don't already have an account? Register

Tim Stotler, 2011. "Procedure Development and Practice Considerations for Inertia and Direct-Drive Rotary Friction Welding", Welding Fundamentals and Processes, T. Lienert, T. Siewert, S. Babu, V. Acoff

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal