Skip to Main Content
ASM Handbook

Powder Metallurgy

Edited by
P. Samal
P. Samal
Search for other works by this author on:
;
J. Newkirk
J. Newkirk
Search for other works by this author on:
ASM International
Volume
7
ISBN electronic:
978-1-62708-175-7
Publication date:
2015
Book Chapter

Credits

Published:
2015

Officers and Trustees of ASM International (2014–2015)

  • Sunniva R. Collins

    President

    Case Western Reserve University

  • Jon D. Tirpak

    Vice President

    SCRA Applied R&D

  • Craig D. Clauser

    Treasurer

    Craig Clauser Engineering Consulting

  • Terry F. Mosier

    Secretary and Interim Managing Director

    ASM International

  • C. Ravi Ravindran

    Immediate Past President

    Ryerson University

  • Iver Anderson

    Ames Laboratory

  • Kathryn A. Dannemann

    Southwest Research Institute

  • Mitchell Dorfman

    Sulzer Metco (US), Inc.

  • Jacqueline M. Earle

    Caterpillar, Inc

  • James C. Foley

    Los Alamos National Laboratory

  • John R. Keough,

    Applied Process, Inc.

  • Zi-Kui Liu

    The Pennsylvania State University

  • Tirumalai S. Sudarshan

    Materials Modification, Inc.

  • David B. Williams

    The Ohio State University

    Student Board Members

  • Virginia K. Judge

    Colorado School of Mines

  • Anthony M. Lombardi

    Ryerson University

  • Myrissa N. Maxfield

    Virginia Tech

Members of the ASM Handbook Committee (2014–2015)

  • George F. Vander Voort, Chair

    Struers Inc.

  • Alan P. Druschitz, Vice Chair

    Virginia Tech

  • Joseph W. Newkirk, Immediate Past Chair

    Missouri University of Science & Technology

  • Craig Clauser, Ex-Officio Member

    Craig Clauser Engineering Consulting

  • Jacqueline M. Earle, Board Liaison

    Caterpillar

  • John R. Keough, Board Liaison

    Applied Process Incorporated

  • Scott Beckwith

    SAMPE

  • Rodney R. Boyer

    RBTi Consulting

  • Narendra B. Dahotre

    University of North Texas

  • Jon L. Dossett

    Consultant

  • Steven C. Heifner

    Sypris Technologies Incorporated

  • Volker Heuer

    ALD Vacuum Technologies GmbH

  • Li Ling

    Shanghai University

  • Brett A. Miller

    IMR Metallurgical Services

  • Erik M. Mueller

    National Transportation Safety Board

  • Thomas E. Prucha

    American Foundry Society

  • Valery Rudnev

    Inductoheat Incorporated

  • Satyam Suraj Sahay

    John Deere Technology Center India

  • Prasan K. Samal

    Consultant

  • Roch J. Shipley

    Professional Analysis Consulting Inc.

  • Manas Shirgaokar

    Ellwood National Crankshaft

  • Jeffery S. Smith

    Material Processing Technology Llc.

  • Jaimie S. Tiley

    US Air Force Research Lab

  • George E. Totten

    G.E. Totten & Associates LLC

  • Dustin A. Turnquist

    Engineering Systems Inc.

  • Charles V. White

    Kettering University

Chairs of the ASM Handbook Committee

  • J.F. Harper

    (1923–1926) (Member 1923–1926)

  • W.J. Merten

    (1927–1930) (Member 1923–1933)

  • L.B. Case

    (1931–1933) (Member 1927–1933)

  • C.H. Herty, Jr.

    (1934–1936) (Member 1930–1936)

  • J.P. Gill

    (1937) (Member 1934–1937)

  • R.L. Dowdell

    (1938–1939) (Member 1935–1939)

  • G.V. Luerssen

    (1943–1947) (Member 1942–1947)

  • J.B. Johnson

    (1948–1951) (Member 1944–1951)

  • E.O. Dixon

    (1952–1954) (Member 1947–1955)

  • N.E. Promisel

    (1955–1961) (Member 1954–1963)

  • R.W.E. Leiter

    (1962–1963) (Member 1955–1958, 1960–1964)

  • D.J. Wright

    (1964–1965) (Member 1959–1967)

  • J.D. Graham

    (1966–1968) (Member 1961–1970)

  • W.A. Stadtler

    (1969–1972) (Member 1962–1972)

  • G.J. Shubat

    (1973–1975) (Member 1966–1975)

  • R. Ward

    (1976–1978) (Member 1972–1978)

  • G.N. Maniar

    (1979–1980) (Member 1974–1980)

  • M.G.H. Wells

    (1981) (Member 1976–1981)

  • J.L. McCall

    (1982) (Member 1977–1982)

  • L.J. Korb

    (1983) (Member 1978–1983)

  • T.D. Cooper

    (1984–1986) (Member 1981–1986)

  • D.D. Huffman

    (1986–1990) (Member 1982–2005)

  • D.L. Olson

    (1990–1992) (Member 1982–1988, 1989–1992)

  • R.J. Austin

    (1992–1994) (Member 1984–1985)

  • W.L. Mankins

    (1994–1997) (Member 1989–)

  • M.M. Gauthier

    (1997–1998) (Member 1990–2000)

  • C.V. Darragh

    (1999–2002) (Member 1989–)

  • Henry E. Fairman

    (2002–2004) (Member 1993–2005)

  • Jeffrey A. Hawk

    (2004–2006) (Member 1997–)

  • Larry D. Hanke

    (2006–2008) (Member 1994–)

  • Kent L. Johnson

    (2008–2010) (Member 1999–)

  • Craig D. Clauser

    (2010–2012) (Member 2005–)

  • Joseph W. Newkirk

    (2012–2014) (Member 2005–)

  • George F. Vander Voort

    (2014–) (Member 1997–)

Volume Editors

  • Prasan K. Samal, Consultant

  • Joseph W. Newkirk, FASM, Missouri University of Science and Technology

Division Editors

  • Paul Beiss, RWTH Aachen University

  • Jon Bitler, Kennametal, Inc.

  • Carl Blais, Université Laval

  • Animesh Bose, FASM, Materials Processing, Inc.

  • Wayne K. Daye, ACuPowder/ECKA Granules/SCM Metal Products, Inc.

  • Don Hashiguchi, FASM, Materion Brush Beryllium & Composites

  • Bo Hu, North American Höganäs

  • W. Brian James, Hoeganaes Corp., retired

  • John L. Johnson, Elmet Technologies LLC

  • Chaman Lall, Metal Powder Products Company

  • Sydney Luk, Höganäs AB

  • Michael Marucci, Hoeganaes Corp.

  • Pankaj K. Mehrotra, Kennametal, Inc.

  • Vladimir S. Moxson, ADMA Products, Inc.

  • Kalathur S. Narasimhan, FASM, Hoeganaes Corp.

  • Thomas W. Pelletiers II, ACuPowder/ECKA Granules/SCM Metal Products, Inc.

  • Mohamed N. Rahaman, Missouri University of Science and Technology

  • Prasan K. Samal, Consultant

  • Binky Sargent, Kennametal, Inc.

  • Chris Schade, GKN Hoeganaes

  • Andrzej Wojcieszynski, FASM, ATI Powder Metals

List of Contributors

  • James P. Adams

    MPIF and APMI International

  • David A. Alven

    Aerojet Ordnance Tennessee

  • Herman E. Amaya

    One Subsea Company

  • Diran Apelian

    Worcester Polytechnic Institute

  • Mark Assel

    Carlisle Brake & Friction

  • Anthony Banik

    ATI High Performance and Specialty Materials

  • J. Baumeister

    Fraunhofer Institute for Manufacturing Technology and Advanced Materials

  • Paul Beiss

    RWTH Aachen University

  • Andrew Bell

    DiaPac

  • D. Paul Bishop

    Dalhousie University

  • Carl Blais

    Université Laval

  • Animesh Bose

    Materials Processing, Inc.

  • Paal Bratland

    OneSubsea

  • Matt Bulger

    NetShape Technologies, Inc.

  • Steven G. Caldwell

    Kennametal Firth Sterling

  • Charles Carson

    Fort Wayne Wire Die, Inc., retired

  • James A. Catanese

    North American Höganäs, Inc.

  • Denis Christopherson Jr.

    Federal-Mogul Corporation

  • Suk Hwan Chung

    Hyundai Steel Company

  • James R. Ciulik

    Laser Welding Solutions

  • Dennis R. Cloutier

    CSP

  • Kevin R. Couchman

    GKN Hoeganaes

  • Wayne K. Daye

    ACuPowder/ECKA Granules/SCM Metal Products, Inc.

  • Peter A. dePoutiloff

    SSI Tchnologies

  • John J. Dunkley

    Atomising Systems Ltd.

  • Vlad Duz

    ADMA Products Inc.

  • Mark Eisenmann

    Porvair Filtration Group, Porvair PLC

  • Sami M. El-Soudani

    The Boeing Company

  • Ravi K. Enneti

    Global Tungsten and Powders

  • Z.Z. Fang

    University of Utah

  • Stephen L Feldbauer

    Abbott Furnace Company

  • F. H. (Sam) Froes

    Consultant

  • Randall M. German

    San Diego State University

  • Anthony Griffo

    Smith Bits, a division of Schlumberger

  • Jack A. Hamill Jr.

    Hoeganaes Corp., retired

  • Francis Hanejko

    Hoeganaes Corp.

  • Don H. Hashiguchi

    Materion Corporation

  • Paul Hauck

    Kinetics

  • Uwe Haupt

    ARBURG GmbH +Co kG

  • Bo Hu

    North American Höganäs, Inc.

  • Ronald G. Iacocca

    Eli Lilly

  • E. Ilia

    Metaldyne Performance Group

  • M. Ashraf Imam

    The George Washington University

  • W. Brian James

    Hoeganaes Corp., retired

  • Thomas Jewett

    Global Tungsten and Powders

  • John L. Johnson

    Elmet Technologies LLC

  • Jessu Joys

    AMPAL Inc.

  • H. Kestler

    PLANSEE SE

  • Jayant Khambekar

    Jenike & Johanson, Inc.

  • Andrey Klevtsov

    ADMA Products Inc.

  • Lou Koehler

    Koehler Associates

  • M. Koopman

    University of Utah

  • Howard A. Kuhn

    The ExOne Company

  • Prabhat Kumar

    Consultant

  • Young-Sam Kwon

    CetaTech, Inc

  • Jane LaGoy

    Bodycote IMT, Inc.

  • Chaman Lall

    Metal Powder Products Company

  • Steven Lampman

    ASM International

  • Gerhard Leichtfried

    University of Innsbruck

  • Todd Leonhardt

    Rhenium Alloys Inc.

  • Jim Lingenfelter

    NetShape Technologies, Inc.

  • Sydney Luk

    Höganäs AB

  • Michael L. Marucci

    Hoeganaes Corp.

  • Stephen J. Mashl

    Michigan Technological University

  • Mykhailo Matviychuk

    ADMA Products Inc.

  • Brian J. McTiernan

    ATI Powder Metals

  • Pankaj K. Mehrotra

    Kennametal, Inc.

  • John H. Moll

    Consultant

  • Amanda L. Morales

    Materion Corporation

  • Richard Morgan

    Porvair Filtration Group, Porvair PLC

  • Vladimir Moxson

    ADMA Products Inc.

  • Thomas F. Murphy

    Hoeganaes Corp.

  • Neal Myers

    Kennametal, Inc.

  • Kalathur S. Narasimhan

    Hoeganaes Corp.

  • Harb S. Nayar

    TAT Technologies

  • Joseph W. Newkirk

    Missouri University of Science and Technology

  • Salvator Nigarura

    PMG Indiana Corporation

  • James J. Oakes

    Consultant

  • Seong Jin Park

    Pohang University of Science and Technology

  • Dan Paulonis

    Raymar

  • Thomas W. Pelletiers II

    ACuPowder/ECKA Granules/SCM Metal Products, Inc.

  • Thomas Philips

    Air Products and Chemicals, Inc.

  • Richard R. Phillips

    Engineered Pressed Materials

  • Volker Piotter

    Karlsruhe Institute of Technology (KIT)

  • Brian Pittenger

    Jenike & Johanson, Inc.

  • Thomas Podbesek

    Consultant

  • Peter E. Price

    Consultant

  • Mohamed N. Rahaman

    Missouri University of Science and Technology

  • R. Randon

    Magnesium Elektron Powders

  • N. Reheis

    PLANSEE SE

  • Troy Robinson

    Cincinnati Incorporated

  • Gary Runyon

    Kennametal Firth Sterling

  • Rajendra Sadangi

    Armament Research, Development and Engineering Center

  • Prasan K. Samal

    Consultant

  • V. Samarov

    Laboratory of New Technologies (LNT) PM Inc.

  • Binky Sargent

    Kennametal, Inc.

  • Aaron B. Sayer

    Materion Corporation

  • Chris Schade

    GKN Hoeganaes

  • Graham Schaffer

    University of Queensland

  • D. Seliverstov

    Laboratory of New Technologies (LNT) PM Inc.

  • Raymond Serafini

    Linde LLC

  • Suresh O. Shah

    MPG-Cloyes Gear

  • Thomas R. Shearer

    Aggressive Grinding Service, d>John A. Shields, Jr.

    PentaMet Associates, LLC

  • Peter K. Sokolowski

    Hoeganaes Corp.

  • Joseph T. Strauss

    HJE Company, Inc.

  • Viktor Sukhoplyuyev

    ADMA Products Inc.

  • Mark Svilar

    Materion Corporation

  • Pierre Taubenblat

    Promet Associates

  • X. Wang

    University of Utah

  • Roland T. Warzel III

    North American Höganäs, Inc.

  • J. Weise

    Fraunhofer Institute for Manufacturing Technology and Advanced Materials

  • Nick Williams

    Inovar Communications Ltd.

  • Andrzej Wojcieszynski

    ATI Powder Metals

  • Thomas A. Wolfe

    Global Tungsten and Powders

Staff

ASM International staff who contributed to the development of the Volume included Victoria Burt, Content Developer; Steve Lampman, Content Developer; Amy Nolan, Content Developer; Sue Sellers, Content Development and Business Coordinator; Karen Marken, Senior Managing Editor; Madrid Tramble, Manager, Production; Kate Fornadel, Senior Production Coordinator; Patty Conti, Production Coordinator; Diane Whitelaw, Production Coordinator; and Scott D. Henry, Director, Content and Knowledge Based Solutions. Editorial assistance was provided by Ed Kubel, Jo Hannah Leyda, Elizabeth Marquard, Scott Ryan, and Bonnie R. Sanders.

2015. "Credits", Powder Metallurgy, P. Samal, J. Newkirk

Download citation file:


Close

Send Email

Recipient(s) will receive an email with a link to 'Powder Metallurgy > Credits' and will not need an account to access the content.

Subject: Powder Metallurgy > Credits

(Optional message may have a maximum of 1000 characters.)

×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal