Skip to Main Content
ASM Handbook

Properties and Selection: Irons, Steels, and High-Performance Alloys

By
ASM Handbook Committee
ASM Handbook Committee
Search for other works by this author on:
ASM International
Volume
1
ISBN electronic:
978-1-62708-161-0
Publication date:
1990
Book Chapter

Hardenable Carbon and Low-Alloy Steels

By
Eugene R. Kuch
Eugene R. Kuch
Revising author
Gardner Denver Division of Cooper Industries
Search for other works by this author on:
Published:
1990
Page range:
451 - 463

Abstract

Carbon steels have wider usage than any other metal because of their versatility and low cost. Required hardenability is the most important factor influencing a choice between carbon- and alloy steel. By increasing hardenability, alloying elements extend the potential for enhanced properties to the large sections required for many applications. Alloy steels are ordinarily quench hardened and tempered to the level of strength desired for the application. Distortion during heat treatment may occur with almost any hardenable carbon or alloy steel, although distortion is usually more severe for carbon grades than for alloy grades of equivalent carbon content. The relatively low hardenability of carbon steels is a primary reason for choosing them in preference to alloy steels for parts that are to be locally heat treated by flame or induction hardening. Fabrication processes are performed on hardenable carbon and alloy steels in the unhardened condition, that is, prior to heat treating.

You do not currently have access to this content.
Don't already have an account? Register

Eugene R. Kuch, 1990. "Hardenable Carbon and Low-Alloy Steels", Properties and Selection: Irons, Steels, and High-Performance Alloys, ASM Handbook Committee

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal