Induction Heating and Heat Treatment
Design and Fabrication of Inductors for Induction Heat Treating
This article provides information on single-shot and scanning, the two types of induction heat treating processes that are based on whether the induction coil is moving relative to the part during the heating process. It describes the effect of the frequency of induction heating current on the induction coil and process design, and the control of heating in different areas of the inductor part. The article reviews three main tools for adjustment of coil design and fabrication: coupling gap, coil copper profile, and magnetic flux controllers. It examines the method of holding a part and presenting it to the inductor during the initial inductor design. The article provides information on coil leads/busswork and contacts that mechanically and electrically connect the induction coil head to the power supply. It concludes with a discussion on flux and oxide removal, leak and flow checking, silver plating, and electrical parameter measurement.
Rob Goldstein, William Stuehr, Micah Black, 2014. "Design and Fabrication of Inductors for Induction Heat Treating", Induction Heating and Heat Treatment, Valery Rudnev, George E. Totten
Download citation file: