Skip to Main Content
ASM Handbook

Induction Heating and Heat Treatment

Edited by
Valery Rudnev
Valery Rudnev
Inductoheat Inc.
Search for other works by this author on:
George E. Totten
George E. Totten
Portland State University
Search for other works by this author on:
ASM International
Volume
4C
ISBN electronic:
978-1-62708-167-2
Publication date:
2014
Book Chapter

Design and Fabrication of Inductors for Heat Treating, Brazing, and Soldering

By
Scott Larrabee
Scott Larrabee
Radyne Corporation
Search for other works by this author on:
Andrew Bernhard
Andrew Bernhard
Radyne Corporation
Search for other works by this author on:
Published:
2014
Page range:
619 - 632
Publication history
May 27, 2014

Abstract

Inductors used for brazing can be machined from solid copper shapes or fabricated out of copper tubing, depending on the size and complexity of the braze joint geometry to be heated. This article provides information on inductors (coils) that are generally classified as solenoid, channel (slot), pancake, hairpin, butterfly, split-return, or internal coils. It discusses the variables pertinent to the design of inductors for brazing, soldering, or heat treating. The article presents various considerations for designing inductors for brazing of dissimilar materials that present a unique challenge in the field of induction brazing.

You do not currently have access to this content.
Don't already have an account? Register

Scott Larrabee, Andrew Bernhard, 2014. "Design and Fabrication of Inductors for Heat Treating, Brazing, and Soldering", Induction Heating and Heat Treatment, Valery Rudnev, George E. Totten

Download citation file:


×
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal