The Application of Ni-Base Alloy Nimonic 80A for Buckets of USC Steam Turbine in China

Nimonic 80A, a Ni-base superalloy mainly strengthened by Al and Ti to form γ'-Ni₃ (Al, Ti) precipitation in Ni-Cr solid solution strengthened austenite matrix, has been used in different industries for more than half century (especially for aero-engine application). In consideration of high strengths and corrosion resistance both Shanghai Turbine Company (STC) has adopted Nimonic 80A as bucket material for ultra-super-critical (USC) turbines with the steam parameters of 600°C, 25MPa. First series of two 1000MW USC steam turbines made by Shanghai Turbine Co. were already put in service on the end of 2006. Large amount of Nimonic 80A with different sizes are produced in Special Steel Branch of BAOSTEEL, Shanghai. Vacuum induction melting and Ar protected atmosphere electro-slag remelting (VIM+PESR) process has been selected for premium quality high strength Nimonic 80A. For higher mechanical properties the alloying element adjustment, optimization of hot deformation and heat treatment followed by detail structure characterization have been done in this paper. The Chinese premium quality high strength Nimonic 80A can fully fulfill the USC turbine bucket requirements.