Volumes | Advances in Materials for Power Plants | ASM International

Skip to Main Content

Skip Nav Destination

Proceedings Volume Cover

AM-EPRI 2024

October 15–18, 2024

Bonita Springs, Florida, USA

Conference Sponsors:

Advances in Materials, Manufacturing, and Repair for Power Plants: Proceedings from the Tenth International Conference

Issue navigation

Advances in Materials, Manufacturing, and Repair for Power Plants: Proceedings from the Tenth International Conference

Characterization of Build Parameters and Microstructure in Low Heat Input Wire-Arc Additive Manufacturing of Ni-based Superalloy Haynes 282

Benjamin Adam; Robert Turpin; Graham Tewksbury; Rui Feng; Chantal Sudbrack; Mathias Pohl; Karl Jarvis; Dustin Crandall

am-epri 2024; 1-12https://doi.org/10.31399/asm.cp.am-epri-2024p0001

View Articletitled, Characterization of Build Parameters and Microstructure in Low Heat Input Wire-Arc Additive Manufacturing of Ni-based Superalloy Haynes 282

The Role of Heat Treatment on Creep Rupture Ductility and its Underlying Metallurgical Mechanism of Forged Ni-based Superalloy

Ko Arisue; Daichi Akama; Yasunari Takeda; Ryuichi Yamamoto

am-epri 2024; 13-22https://doi.org/10.31399/asm.cp.am-epri-2024p0013

View Articletitled, The Role of Heat Treatment on Creep Rupture Ductility and its Underlying Metallurgical Mechanism of Forged Ni-based Superalloy

Corrosion Behavior of Additively Manufactured Stainless Steels in Nuclear Environments

Micaela Goland; Fanny Balbaud; Alexis Fouchereau; Catherine Guerre; Josiane Nguejio; Beatriz Puga; Matthias Rousseau; Thomas Cailloux; Hicham Maskrot; Wilfried Pacquentin

am-epri 2024; 23-38https://doi.org/10.31399/asm.cp.am-epri-2024p0023

View Articletitled, Corrosion Behavior of Additively Manufactured Stainless Steels in Nuclear Environments

Comparison of the ASME Welding Qualification Code Requirements for Power Plants

Darren Barborak; Steven L. McCracken

am-epri 2024; 39-49https://doi.org/10.31399/asm.cp.am-epri-2024p0039

View Articletitled, Comparison of the ASME Welding Qualification Code Requirements for Power Plants

Development and Commercialization of Adaptive Feedback Welding Technology for Fabrication and Repair Applications

Shems-Eddine Belhout; Jon Tatman; Darren Barborak; Mitch Hargadine; Benedikt von Querfurth; Christian Knaak; Stefan Mann; Janusz Bialach; Dana Clemence; Michael Wright

am-epri 2024; 50-61https://doi.org/10.31399/asm.cp.am-epri-2024p0050

View Articletitled, Development and Commercialization of Adaptive Feedback Welding Technology for Fabrication and Repair Applications

High Temperature Mechanical Behavior of Refractory Alloys with Digital Image Correlation

Samuel B. W. Bell; Bruce A. Pint; Mackenzie J. Ridley; Sebastien N. Dryepondt

am-epri 2024; 62-73https://doi.org/10.31399/asm.cp.am-epri-2024p0062

View Articletitled, High Temperature Mechanical Behavior of Refractory Alloys with Digital Image Correlation

Acceleration of Material Acceptance and Industry Adoption of an Additively Manufactured Nickel-base Superalloy

Alex Bridges; John Shingledecker; Zara Hussain; Jon Forster; Andre Nemeth; Greg Vogel; Nathan O’Nora

am-epri 2024; 74-87https://doi.org/10.31399/asm.cp.am-epri-2024p0074

View Articletitled, Acceleration of Material Acceptance and Industry Adoption of an Additively Manufactured Nickel-base Superalloy

Damage and Cracking in 1CrMoV Casings: Why and How to Repair?

D. Joshua Burgess; Ian Perrin

am-epri 2024; 88-98https://doi.org/10.31399/asm.cp.am-epri-2024p0088

View Articletitled, Damage and Cracking in 1CrMoV Casings: Why and How to Repair?

Experimental and Numerical Characterization of High Temperature Deformation Behavior of 347H Stainless Steel

Jobin K. Joy; A. Rovinelli; M. Arul Kumar; R.A. Lebensohn; L. Capolungo; Q.Q. Ren; Y. Yamamoto; J.D. Poplawsky; M. Detrois; P. Jablonski

am-epri 2024; 99-110https://doi.org/10.31399/asm.cp.am-epri-2024p0099

View Articletitled, Experimental and Numerical Characterization of High Temperature Deformation Behavior of 347H Stainless Steel

Surface Characterization of Laser Clad Surfaces using Profile and Arial Techniques

Rahul Mandal; Simon Cavill; Stephen Bloomer; Charles Carpenter; Bernd Baufeld

am-epri 2024; 111-112https://doi.org/10.31399/asm.cp.am-epri-2024p0111

View Articletitled, Surface Characterization of Laser Clad Surfaces using Profile and Arial Techniques

Evaluation of the Mechanical Properties of Cast and Wrought CF8C-Plus Relevant to ASME Code Case Qualification

Xiang (Frank) Chen; Peter F. Tortorelli; Michael L. Santella; Bruce A. Pint; Hong Wang; Philip J. Maziasz; Benjamin Sutton; Daniel Purdy

am-epri 2024; 123-134https://doi.org/10.31399/asm.cp.am-epri-2024p0123

View Articletitled, Evaluation of the Mechanical Properties of Cast and Wrought CF8C-Plus Relevant to ASME Code Case Qualification

Demonstration of Helium Measurement Capability to Support Repair of Irradiated Components

Jean Collin; Chuck Marks; Jack Dingee; Jonathan Tatman

am-epri 2024; 135-146https://doi.org/10.31399/asm.cp.am-epri-2024p0135

View Articletitled, Demonstration of Helium Measurement Capability to Support Repair of Irradiated Components

Creep Resistant Martensitic Steels for Operation at High-Temperatures in Power Generation Applications

Martin Detrois; Chang-Yu Hung; Stoichko Antonov; Paul D. Jablonski

am-epri 2024; 147-158https://doi.org/10.31399/asm.cp.am-epri-2024p0147

View Articletitled, Creep Resistant Martensitic Steels for Operation at High-Temperatures in Power Generation Applications

Microstructure and Mechanical Properties of Ni-based Alloys Fabricated by Laser Powder Bed Fusion

Sebastien Dryepondt; Holden Hyer; Fred List; Stephen Taller; Amir Ziabari; Yi-Feng Su; Zackary Snow

am-epri 2024; 159-170https://doi.org/10.31399/asm.cp.am-epri-2024p0159

View Articletitled, Microstructure and Mechanical Properties of Ni-based Alloys Fabricated by Laser Powder Bed Fusion

Steam Oxidation Resistance in a Long Term Exposure of the Modified Laser Powder Bed Fusion 699XA Alloy at High Temperature

T. Dudziak; E. Rząd; A. Polkowska; T. Polczyk; P. Rob; V. Narayana Samy; B. Verma; I. Sulak; B. Nowak; U. Krupp

am-epri 2024; 171-182https://doi.org/10.31399/asm.cp.am-epri-2024p0171

View Articletitled, Steam Oxidation Resistance in a Long Term Exposure of the Modified Laser Powder Bed Fusion 699XA Alloy at High Temperature

Complex Linear Welding Development for Thick Section Electron Beam Welding for Pressure Vessel Applications

Thomas Dutilleul; Robert Widdison; James Connell; John Crossley; Mark Albert; David Gandy

am-epri 2024; 183-194https://doi.org/10.31399/asm.cp.am-epri-2024p0183

View Articletitled, Complex Linear Welding Development for Thick Section Electron Beam Welding for Pressure Vessel Applications

Fiber-jacketed Creep Resistant Pipes for High-Temperature Applications

Maximilian Friedrich; Andreas Klenk; Stefan Weihe

am-epri 2024; 195-206https://doi.org/10.31399/asm.cp.am-epri-2024p0195

View Articletitled, Fiber-jacketed Creep Resistant Pipes for High-Temperature Applications

Tensile Property Measurement of AlSi10Mg Lattice Structures - From Single Strut to Lattice Networks

A.T Fry; L. E. Crocker; P. Woolliams; M. Poole; A. Koko; C. Breheny

am-epri 2024; 207-218https://doi.org/10.31399/asm.cp.am-epri-2024p0207

View Articletitled, Tensile Property Measurement of AlSi10Mg Lattice Structures - From Single Strut to Lattice Networks

Creep Cavitation Imaging and Analysis in 9%Cr-1%Mo P91 Steels

Eirini C. Galliopoulou; Christopher Jones; Lawrence Coghlan; Mariia Zimina; Tomas L. Martin; Peter E. J. Flewitt; Alan Cocks; John Siefert; Jonathan D. Parker

am-epri 2024; 219-234https://doi.org/10.31399/asm.cp.am-epri-2024p0219

View Articletitled, Creep Cavitation Imaging and Analysis in 9%Cr-1%Mo P91 Steels

Use of Modeling and Experiments to Assess the Effect of Minor Alloying Additions on Alumina Scale Formation during High-Temperature Oxidation

Rafael Rodríguez De Vecchis; Brian Gleeson; Rishi Pillai

am-epri 2024; 235-246https://doi.org/10.31399/asm.cp.am-epri-2024p0235

View Articletitled, Use of Modeling and Experiments to Assess the Effect of Minor Alloying Additions on Alumina Scale Formation during High-Temperature Oxidation

PAW and GTAW Welding Repair of HP/IP and Generator Rotors of a Steam Turbine for Electric Power Generation

Pablo Andrés Gómez Flórez; Alejandro Toro Betancur; John Edison Morales Galeano; Jeisson Mejía Velásquez

am-epri 2024; 247-258https://doi.org/10.31399/asm.cp.am-epri-2024p0247

View Articletitled, PAW and GTAW Welding Repair of HP/IP and Generator Rotors of a Steam Turbine for Electric Power Generation

Life Extension of Gas Turbine Blades Made from Nickel-Based Superalloys

Vamadevan Gowreesan; Wayne Greaves

am-epri 2024; 259-269https://doi.org/10.31399/asm.cp.am-epri-2024p0259

View Articletitled, Life Extension of Gas Turbine Blades Made from Nickel-Based Superalloys

Investigation into Creep Strength of Inconel Alloy 740H Thin-Walled Welded Tubing for Concentrating Solar Power Applications

Eeva Griscom; John Shingledecker; Dan Purdy; John deBarbadillo; Brian Baker; Ronald Gollihue

am-epri 2024; 270-283https://doi.org/10.31399/asm.cp.am-epri-2024p0270

View Articletitled, Investigation into Creep Strength of Inconel Alloy 740H Thin-Walled Welded Tubing for Concentrating Solar Power Applications

Final Results of the U.S. Advanced Ultra-Supercritical Component Test Project for 760°C Steam Conditions

Horst Hack; Robert Purgert

am-epri 2024; 284-295https://doi.org/10.31399/asm.cp.am-epri-2024p0284

View Articletitled, Final Results of the U.S. Advanced Ultra-Supercritical Component Test Project for 760°C Steam Conditions

Assessment of Cracking and Strain Monitoring of a Grade 92 Pipe from a Heat Recovery Steam Generator

Su Ji Han; Han-sang Lee; Jinesung Jung; Gil Jae Lee; Jin-Geun Park; Seung Wook Lee

am-epri 2024; 296-303https://doi.org/10.31399/asm.cp.am-epri-2024p0296

View Articletitled, Assessment of Cracking and Strain Monitoring of a Grade 92 Pipe from a Heat Recovery Steam Generator

Coal-fired Power Plant Boiler Tube Corrosion Inspection Equipment and Remaining Lifetime Evaluation Program

Su Ji Han; Han-sang Lee; Hae-ryun Min; Gil Jae Lee; Seung Wook Lee; JeongTae Kim

am-epri 2024; 304-315https://doi.org/10.31399/asm.cp.am-epri-2024p0304

View Articletitled, Coal-fired Power Plant Boiler Tube Corrosion Inspection Equipment and Remaining Lifetime Evaluation Program

Creep Crack Growth on High and Low Creep Ductility Grade 91 Steel

Troy Hanes; Robert Stephens; John Siefert; Ian Perrin

am-epri 2024; 316-327https://doi.org/10.31399/asm.cp.am-epri-2024p0316

View Articletitled, Creep Crack Growth on High and Low Creep Ductility Grade 91 Steel

Steel Casting Process Development: Advanced Processing of Martensitic 9-10% Cr Steels and Nickel-Base Alloy 625

Reinhold Hanus; voestalpine Giesserei Linz

am-epri 2024; 328-337https://doi.org/10.31399/asm.cp.am-epri-2024p0328

View Articletitled, Steel Casting Process Development: Advanced Processing of Martensitic 9-10% Cr Steels and Nickel-Base Alloy 625

Impact of Three Additive Manufacturing Techniques on Microstructure and Creep Damage Development in Alloy 718

Nikki Harless; John Shingledecker; Kyle Stoodt; Kevin Cwiok; Anand Kulkarni

am-epri 2024; 338-354https://doi.org/10.31399/asm.cp.am-epri-2024p0338

View Articletitled, Impact of Three Additive Manufacturing Techniques on Microstructure and Creep Damage Development in Alloy 718

Metal Temperature Estimation in High-Strength Austenitic Stainless Steels through Precipitation Analysis

Keita Hashimoto; Ko Arisue; Nobuhiko Saito; Tadaaki Nakamura; Nobuyoshi Komai; Kimihiko Tominaga

am-epri 2024; 355-364https://doi.org/10.31399/asm.cp.am-epri-2024p0355

View Articletitled, Metal Temperature Estimation in High-Strength Austenitic Stainless Steels through Precipitation Analysis

Microstructure of Modified 9Cr-1Mo Steel Manufactured via Laser Powder Bed Fusion

Tomotaka Hatakeyama; Kota Sawada; Masaru Suzuki; Makoto Watanabe

am-epri 2024; 365-372https://doi.org/10.31399/asm.cp.am-epri-2024p0365

View Articletitled, Microstructure of Modified 9Cr-1Mo Steel Manufactured via Laser Powder Bed Fusion

Cold Spray Application onto Stainless Steel Dry Cask Storage Canisters

Michael Heath; Dan Hogan; Gary Cannell; Marie Gillespie

am-epri 2024; 373-383https://doi.org/10.31399/asm.cp.am-epri-2024p0373

View Articletitled, Cold Spray Application onto Stainless Steel Dry Cask Storage Canisters

Evaluating Quality of Diffusion Bonded Material through Microscopy Measurement of Bondline Grain Growth

Ian Jentz; Lukas Desorcy; Andrea Bollinger

am-epri 2024; 384-396https://doi.org/10.31399/asm.cp.am-epri-2024p0384

View Articletitled, Evaluating Quality of Diffusion Bonded Material through Microscopy Measurement of Bondline Grain Growth

Evaluation of Highly Irradiated Stainless Steel and Nickel-based Materials using Phased Array Ultrasonic Inspections

Kristian C. Johnson; Daniel T. MacLauchlan; H. Josiah Phan; B. Blake Wiggins; Cody D. Williams; Jonathan Tatman

am-epri 2024; 397-408https://doi.org/10.31399/asm.cp.am-epri-2024p0397

View Articletitled, Evaluation of Highly Irradiated Stainless Steel and Nickel-based Materials using Phased Array Ultrasonic Inspections

Effect of Induction Coil Configuration for Localized Postweld Heat Treatment of 9% Cr Steel Control Valves

Matas Nakunchon; Puwadech Veeranawin; Phuris Khunphakdee; Jaturawit Keawkoed

am-epri 2024; 409-417https://doi.org/10.31399/asm.cp.am-epri-2024p0409

View Articletitled, Effect of Induction Coil Configuration for Localized Postweld Heat Treatment of 9% Cr Steel Control Valves

Flow Accelerated Corrosion Investigation and Mitigation in a Heat Recovery Steam Generator

Phuris Khunphakdee; Sarayuth Limpanichkul

am-epri 2024; 418-428https://doi.org/10.31399/asm.cp.am-epri-2024p0418

View Articletitled, Flow Accelerated Corrosion Investigation and Mitigation in a Heat Recovery Steam Generator

Component Testing under Cyclic Operation Modes for Martensitic Steels and Ni-based Alloys in the HWT3 Power Plant Test Loop

Andreas Klenk; Maximilian Friedrich; Klaus Metzger

am-epri 2024; 429-440https://doi.org/10.31399/asm.cp.am-epri-2024p0429

View Articletitled, Component Testing under Cyclic Operation Modes for Martensitic Steels and Ni-based Alloys in the HWT3 Power Plant Test Loop

Creep Behaviors of Alloy 718 Type Ni-Based Superalloys

Satoru Kobayashi; Takumi Tsuya

am-epri 2024; 441-448https://doi.org/10.31399/asm.cp.am-epri-2024p0441

View Articletitled, Creep Behaviors of Alloy 718 Type Ni-Based Superalloys

Investigating the Microstructural Evolution of Inconel 718 under a Controlled Thermal Gradient

Abdalrhaman Koko; Wesley Bond; Rob Simpson; Maria Lodeiro; Aldo Mendieta; Gavin Sutton

am-epri 2024; 449-460https://doi.org/10.31399/asm.cp.am-epri-2024p0449

View Articletitled, Investigating the Microstructural Evolution of Inconel 718 under a Controlled Thermal Gradient

Creep Rupture Strength and Ductility of Grade 92 Steel

Nobuyoshi Komai; Ko Arisue; Keita Hashimoto; Nobuhiko Saito; Kimihiko Tominaga

am-epri 2024; 461-472https://doi.org/10.31399/asm.cp.am-epri-2024p0461

View Articletitled, Creep Rupture Strength and Ductility of Grade 92 Steel

Material Synthesis and Advanced Manufacturing Without Melting: Advantages of Bulk, High-Shear Processing

Mageshwari Komarasamy; Glenn Grant

am-epri 2024; 473-482https://doi.org/10.31399/asm.cp.am-epri-2024p0473

View Articletitled, Material Synthesis and Advanced Manufacturing Without Melting: Advantages of Bulk, High-Shear Processing

Atmosphere Influence on the Fatigue Crack Growth Behavior of Wrought, Cast and PBF-LB/M Processed IN718 under Different Loading Conditions at 650 °C

T. Brune; K. M. Kraemer; C. Kontermann; M. Oechsner; M. Bellmer; M. Schlesinger

am-epri 2024; 483-494https://doi.org/10.31399/asm.cp.am-epri-2024p0483

View Articletitled, Atmosphere Influence on the Fatigue Crack Growth Behavior of Wrought, Cast and PBF-LB/M Processed IN718 under Different Loading Conditions at 650 °C

Wire Arc Additive Manufacturing of Creep Strength Enhanced Ferritic Steels and Nickel Alloys

Ronny Krein; Vadym Sushko

am-epri 2024; 495-506https://doi.org/10.31399/asm.cp.am-epri-2024p0495

View Articletitled, Wire Arc Additive Manufacturing of Creep Strength Enhanced Ferritic Steels and Nickel Alloys

Microstructural Analysis of MoSiBTiC Alloys Based on Scanning Electron Microscopy Image Segmentation

Chihana Kudo; Xinyu Yan; Kyosuke Yoshimi

am-epri 2024; 507-516https://doi.org/10.31399/asm.cp.am-epri-2024p0507

View Articletitled, Microstructural Analysis of MoSiBTiC Alloys Based on Scanning Electron Microscopy Image Segmentation

Fatigue Properties of High-Performance Ferritic (HiperFer) Steels

Kuhn; Bernd; Fischer; Torsten

am-epri 2024; 517-527https://doi.org/10.31399/asm.cp.am-epri-2024p0517

View Articletitled, Fatigue Properties of High-Performance Ferritic (HiperFer) Steels

Damage of Rankine Cycle Components in Concentrated Solar Power Plants

Steven Kung; Michael Caravaggio

am-epri 2024; 528-539https://doi.org/10.31399/asm.cp.am-epri-2024p0528

View Articletitled, Damage of Rankine Cycle Components in Concentrated Solar Power Plants

Investigation of Cold-spray Performance for Cleaning and Repair of Dry Cask Storage System (DCSS) Canisters within a Characteristic Confinement

JP Lacy; Jon Tatman; Mitch Hargadine; Shannon Chu; Kyle Johnson; Jamie Beard

am-epri 2024; 540-551https://doi.org/10.31399/asm.cp.am-epri-2024p0540

View Articletitled, Investigation of Cold-spray Performance for Cleaning and Repair of Dry Cask Storage System (DCSS) Canisters within a Characteristic Confinement

Analysis of Crystal Structure in Temper Embrittled 12% Cr Turbine Blade Steel

Gil Jae Lee; Byung Hak Choe

am-epri 2024; 552-560https://doi.org/10.31399/asm.cp.am-epri-2024p0552

View Articletitled, Analysis of Crystal Structure in Temper Embrittled 12% Cr Turbine Blade Steel

Creep Property of Long-term Service Exposed T23-347H Dissimilar Welded Joint

Seung Wook Lee; Han-sang Lee; Ji Han

am-epri 2024; 561-572https://doi.org/10.31399/asm.cp.am-epri-2024p0561

View Articletitled, Creep Property of Long-term Service Exposed T23-347H Dissimilar Welded Joint

Assessment of Super Duplex Stainless Steel Welding using Hyper Duplex Filler Metal: Microstructure and Corrosion Performance

Henry Leon-Henao; Kaue C. Riffel; Andres Acuna; Antonio J. Ramirez

am-epri 2024; 573-581https://doi.org/10.31399/asm.cp.am-epri-2024p0573

View Articletitled, Assessment of Super Duplex Stainless Steel Welding using Hyper Duplex Filler Metal: Microstructure and Corrosion Performance

Study on Creep Rupture Properties of Inconel 617B and 10%Cr Steel Dissimilar Metal Weld

Songlin Li; Xin Huo; Kejian Li; Zhipeng Cai

am-epri 2024; 582-591https://doi.org/10.31399/asm.cp.am-epri-2024p0582

View Articletitled, Study on Creep Rupture Properties of Inconel 617B and 10%Cr Steel Dissimilar Metal Weld

Innovative Design of Advanced Niobium-Based Alloys for Extreme High-Temperature Applications

Zhi Liang; Menglei Jiang; Jiadong Gong; Greg B. Olson

am-epri 2024; 592-599https://doi.org/10.31399/asm.cp.am-epri-2024p0592

View Articletitled, Innovative Design of Advanced Niobium-Based Alloys for Extreme High-Temperature Applications

A Novel in Situ Miniature Creep Tester for Evaluation of New Cladding Alloys

Lucas Maciel de Andrade Lima; Tasnim Hassan

am-epri 2024; 600-611https://doi.org/10.31399/asm.cp.am-epri-2024p0600

View Articletitled, A Novel in Situ Miniature Creep Tester for Evaluation of New Cladding Alloys

Effect of Manufacturing Process Parameters on Long-Term Microstructural Evolution and Accumulation of Creep Damage in Grade 91 Material

M. Ortolani; R. Locatelli; J. Siefert; A. Bridges

am-epri 2024; 612-622https://doi.org/10.31399/asm.cp.am-epri-2024p0612

View Articletitled, Effect of Manufacturing Process Parameters on Long-Term Microstructural Evolution and Accumulation of Creep Damage in Grade 91 Material

Improvements in Creep Ductility of the UK Cast MarBN Steel, IBN-1

Scott Lockyer; Steve Roberts; Martin Strangwood; Jiahui Qi; Simran Thandi; Sam Davis; Mark A. E. Jepson

am-epri 2024; 623-634https://doi.org/10.31399/asm.cp.am-epri-2024p0623

View Articletitled, Improvements in Creep Ductility of the UK Cast MarBN Steel, IBN-1

Understanding the Kinetics of Sigma Phase Evolution in Super 304H using Lab Creep Tested Heats and Long-term Service Aged Components

T. Lolla; J. Siefert; H. Lee; J. Kim; K. Hashimoto; N. Komai; K. Tominaga

am-epri 2024; 635-649https://doi.org/10.31399/asm.cp.am-epri-2024p0635

View Articletitled, Understanding the Kinetics of Sigma Phase Evolution in Super 304H using Lab Creep Tested Heats and Long-term Service Aged Components

The Development of Weldable Nickel-Based Superalloys and Technologies for Repair and Additive Manufacturing of Turbine Engine Components

Alexandre B. Gontcharov; Paul Lowden

am-epri 2024; 650-661https://doi.org/10.31399/asm.cp.am-epri-2024p0650

View Articletitled, The Development of Weldable Nickel-Based Superalloys and Technologies for Repair and Additive Manufacturing of Turbine Engine Components

Off-Stoichiometric Effect on Properties of TiC

Hiromu Matsuura; Kotaro Hoshizaki; Shuntaro Ida; Kyosuke Yoshimi

am-epri 2024; 662-668https://doi.org/10.31399/asm.cp.am-epri-2024p0662

View Articletitled, Off-Stoichiometric Effect on Properties of TiC

High-Performance Corrosion and Erosion Resistance of an Amorphous Iron-Based Alloy Coating Exposed to Molten FLiNaK Salt Nuclear Reactor Coolant at 700 °C

Enrique Maya-Visuet

am-epri 2024; 669-677https://doi.org/10.31399/asm.cp.am-epri-2024p0669

View Articletitled, High-Performance Corrosion and Erosion Resistance of an Amorphous Iron-Based Alloy Coating Exposed to Molten FLiNaK Salt Nuclear Reactor Coolant at 700 °C

Creep Deformation Mechanisms in IN738LC Manufactured With Laser Powder Bed Fusion

Sandra Megahed; Karl Michael Krämer; Christian Kontermann; Christoph Heinze; Annett Udoh; Stefan Weihe; Matthias Oechsner

am-epri 2024; 678-689https://doi.org/10.31399/asm.cp.am-epri-2024p0678

View Articletitled, Creep Deformation Mechanisms in IN738LC Manufactured With Laser Powder Bed Fusion

Friction Stir Layer Deposition of a High Entropy Alloy for Nuclear Applications

Subhashish Meher; David Garcia; Mohan S.K.K.Y. Nartu; Tianhao Wang; Irving; Brown; Jorge F. dos Santos; Isabella van Rooyen

am-epri 2024; 690-698https://doi.org/10.31399/asm.cp.am-epri-2024p0690

View Articletitled, Friction Stir Layer Deposition of a High Entropy Alloy for Nuclear Applications

Nickel Superalloy Composition and Process Optimization for Weldability, Cost, and Strength

Sophie Mehl; Anna Cole; Tanner Olson; Paul Sanders; John Shingledecker; Shutong Zhang

am-epri 2024; 699-711https://doi.org/10.31399/asm.cp.am-epri-2024p0699

View Articletitled, Nickel Superalloy Composition and Process Optimization for Weldability, Cost, and Strength

Damage Mechanisms - Failure Analysis of Cracked 304 Stainless Steel Conduit of PWR Incore Instrumentation System

Alejandro Mejia; Richard Martin; Hui Lu

am-epri 2024; 712-722https://doi.org/10.31399/asm.cp.am-epri-2024p0712

View Articletitled, Damage Mechanisms - Failure Analysis of Cracked 304 Stainless Steel Conduit of PWR Incore Instrumentation System

Weldability Evaluation of Computationally Designed Filler Wires for Wire-Arc Additive Manufacturing of Functionally Graded Materials in Harsh Service Environments

Giacomo Melaragno; Boian Alexandrov; John Shingledecker; John Siefert; Michael Gagliano; Jorge Penso

am-epri 2024; 723-734https://doi.org/10.31399/asm.cp.am-epri-2024p0723

View Articletitled, Weldability Evaluation of Computationally Designed Filler Wires for Wire-Arc Additive Manufacturing of Functionally Graded Materials in Harsh Service Environments

Weld Metal Additive Manufacturing for Grade 91

Teresa Melfi; Niyanth Sridharan; J. Ben Schaeffer; Zhuyao Zhang

am-epri 2024; 735-749https://doi.org/10.31399/asm.cp.am-epri-2024p0735

View Articletitled, Weld Metal Additive Manufacturing for Grade 91

Microstructural Models for the Creep Strength and Ductility of Diffusion-Bonded 316H Steel

Sagar Bhatt; Mark C. Messner; Rui Wang; Fei Gao

am-epri 2024; 750-759https://doi.org/10.31399/asm.cp.am-epri-2024p0750

View Articletitled, Microstructural Models for the Creep Strength and Ductility of Diffusion-Bonded 316H Steel

Creep Strength and Microstructure in Welded Joints of ASME Grade 91 Type 1 and Type 2 Steels

Masatoshi Mitsuhara; Katsuhiro Sato; Kyohei Nomura; Takahiro Kimura; Yoshiki Shioda; Kota Sawada; Kazuhiro Kimura; Hideharu Nakashima

am-epri 2024; 760-765https://doi.org/10.31399/asm.cp.am-epri-2024p0760

View Articletitled, Creep Strength and Microstructure in Welded Joints of ASME Grade 91 Type 1 and Type 2 Steels

LCF and TMF of Superalloys Used for IGT Blades and Vanes

Richard W. Neu; Rohan Acharya; Alexander N. Caputo; Alex Bridges; John Shingledecker

am-epri 2024; 766-783https://doi.org/10.31399/asm.cp.am-epri-2024p0766

View Articletitled, LCF and TMF of Superalloys Used for IGT Blades and Vanes

CEN WS064: Code Evolution and Pre-Normative Research for Generation IV Nuclear Reactor Design and Construction Codes

Karl-Fredrik Nilsson; Cécile Pétesch

am-epri 2024; 784-799https://doi.org/10.31399/asm.cp.am-epri-2024p0784

View Articletitled, CEN WS064: Code Evolution and Pre-Normative Research for Generation IV Nuclear Reactor Design and Construction Codes

The Small Punch Creep Test: A Tool to Rank and Qualify Creep Properties for the Comparison of Forged and Additive Manufactured 316L Stainless Steels

Karl-Fredrik Nilsson; Igor Simonovski; Daniele Baraldi; Stefan Holmström

am-epri 2024; 800-813https://doi.org/10.31399/asm.cp.am-epri-2024p0800

View Articletitled, The Small Punch Creep Test: A Tool to Rank and Qualify Creep Properties for the Comparison of Forged and Additive Manufactured 316L Stainless Steels

Homogenization During Solution Heat Treatment of Ni-Base Single-Crystal Superalloy TMS-238

Naoki Ohno; Toshio Osada; Chihiro Tabata; Tadaharu Yokokawa; Ayako Ikeda; Kyoko Kawagishi; Shinsuke Suzuki

am-epri 2024; 814-820https://doi.org/10.31399/asm.cp.am-epri-2024p0814

View Articletitled, Homogenization During Solution Heat Treatment of Ni-Base Single-Crystal Superalloy TMS-238

Effect of Ni Content on Hydrogen Embrittlement of Conventional Ni-Based Alloys

Yutaro Oki; Tomohiro Ando; Yoshihiko Koyanagi; Hiroto Kitaguchi; Lung Yu-Chiu

am-epri 2024; 821-829https://doi.org/10.31399/asm.cp.am-epri-2024p0821

View Articletitled, Effect of Ni Content on Hydrogen Embrittlement of Conventional Ni-Based Alloys

Updated Evaluation of Creep Damage Tolerance in THOR 115 Parent Material and Weldments

M. Ortolani; R. Locatelli; J. Siefert; A. Bridges

am-epri 2024; 830-842https://doi.org/10.31399/asm.cp.am-epri-2024p0830

View Articletitled, Updated Evaluation of Creep Damage Tolerance in THOR 115 Parent Material and Weldments

Sigma Embrittlement Evaluation Test for Dissimilar Welding Between F6NM and FXM-19

Ryoji Osafune; Stephen Tate; Jamison Leiss

am-epri 2024; 843-854https://doi.org/10.31399/asm.cp.am-epri-2024p0843

View Articletitled, Sigma Embrittlement Evaluation Test for Dissimilar Welding Between F6NM and FXM-19

Weld Process Effects on Fatigue Performance in the Repair of Coke Drums

Ronald Payne

am-epri 2024; 855-860https://doi.org/10.31399/asm.cp.am-epri-2024p0855

View Articletitled, Weld Process Effects on Fatigue Performance in the Repair of Coke Drums

ABD-1000AM: a Highly Processible Superalloy for Additive Manufacturing, Computationally Designed for 1000°C Applications

Dominic Peachey; Yining He; Pimin Zhang; John Clark; Zara Hussain; Thomas Wagstaff; André Nemeth; David Crudden

am-epri 2024; 861-872https://doi.org/10.31399/asm.cp.am-epri-2024p0861

View Articletitled, ABD-1000AM: a Highly Processible Superalloy for Additive Manufacturing, Computationally Designed for 1000°C Applications

Creep Ductility in 9Cr Creep Strength Enhanced Ferritic Steels - Part I, Structural Response

Ian J. Perrin; John A. Siefert; Jonathan D. Parker

am-epri 2024; 873-884https://doi.org/10.31399/asm.cp.am-epri-2024p0873

View Articletitled, Creep Ductility in 9Cr Creep Strength Enhanced Ferritic Steels - Part I, Structural Response

Summary of Structural Alloy Compatibility in Supercritical CO₂ at 450°-800°C

Bruce A. Pint; Rishi Pillai; James R. Keiser

am-epri 2024; 885-896https://doi.org/10.31399/asm.cp.am-epri-2024p0885

View Articletitled, Summary of Structural Alloy Compatibility in Supercritical CO<sub>2</sub> at 450°-800°C

Assessing the Impact of Molten Halide Salts on Creep of Structural Alloys at 650°-750°C

Rishi Pillai; Bruce A. Pint

am-epri 2024; 897-908https://doi.org/10.31399/asm.cp.am-epri-2024p0897

View Articletitled, Assessing the Impact of Molten Halide Salts on Creep of Structural Alloys at 650°-750°C

An Investigation of J513 Alloy Powder for a Plasma-Transferred Arc Cladding Application

C. Paul Qiao

am-epri 2024; 909-923https://doi.org/10.31399/asm.cp.am-epri-2024p0909

View Articletitled, An Investigation of J513 Alloy Powder for a Plasma-Transferred Arc Cladding Application

Computational Approach To Predict Solidification Cracking Susceptibility in Welding Filler Metals

Kaue C. Riffel; Igor J. Marques; Henry Leon-Henao; Antonio J. Ramirez; Steve McCracken; Jonathan Tatman

am-epri 2024; 924-932https://doi.org/10.31399/asm.cp.am-epri-2024p0924

View Articletitled, Computational Approach To Predict Solidification Cracking Susceptibility in Welding Filler Metals

Effect of Reheated CGHAZ Microstructure on Hydrogen-Induced Cracking Susceptibility in SA-508 Steel

Fernando Romero; William Siefert; Steven L. McCracken; Boian Alexandrov

am-epri 2024; 933-944https://doi.org/10.31399/asm.cp.am-epri-2024p0933

View Articletitled, Effect of Reheated CGHAZ Microstructure on Hydrogen-Induced Cracking Susceptibility in SA-508 Steel

Creep Behavior of Austenitic Steels in CO₂ and the Effect of Specimen Thickness

Kyle A. Rozman; Richard P. Oleksak; Ömer N. Doğan

am-epri 2024; 945-959https://doi.org/10.31399/asm.cp.am-epri-2024p0945

View Articletitled, Creep Behavior of Austenitic Steels in CO<sub>2</sub> and the Effect of Specimen Thickness

Nondestructive Detection of Creep Damage in ASME Grade 91 Steel Welds

am-epri 2024; 960-968https://doi.org/10.31399/asm.cp.am-epri-2024p0960

View Articletitled, Nondestructive Detection of Creep Damage in ASME Grade 91 Steel Welds

Creep Ductility in 9Cr Creep Strength Enhanced Ferritic Steels - Part II, Microstructural Observations

John A. Siefert; Jonathan D. Parker; Ian J. Perrin

am-epri 2024; 969-983https://doi.org/10.31399/asm.cp.am-epri-2024p0969

View Articletitled, Creep Ductility in 9Cr Creep Strength Enhanced Ferritic Steels - Part II, Microstructural Observations

Quantification of Dynamic Recrystallization and Its Relation to Imposed Mechanical Energy and Ductility Dip Cracking in High-Chromium Nickel Alloy Groove Welds

Anil Singh; Boian T. Alexandrov; Michael J. Mills; Samuel J. Luther; Steven L. McCracken; Jonathan K. Tatman

am-epri 2024; 984-993https://doi.org/10.31399/asm.cp.am-epri-2024p0984

View Articletitled, Quantification of Dynamic Recrystallization and Its Relation to Imposed Mechanical Energy and Ductility Dip Cracking in High-Chromium Nickel Alloy Groove Welds

Influence of Solution Annealing on Creep Behavior of Additively Manufactured 316H SS Using Microstructurally Graded Specimen

John Snitzer; Xiaoyuan Lou; Bingqiang Wei; Jian Wang

am-epri 2024; 994-1007https://doi.org/10.31399/asm.cp.am-epri-2024p0994

View Articletitled, Influence of Solution Annealing on Creep Behavior of Additively Manufactured 316H SS Using Microstructurally Graded Specimen

Demonstration of Thick-Section Welding of Haynes 282 to Steel

Shankar Srinivasan; Gerald Bruck; Arun Mohan

am-epri 2024; 1008-1019https://doi.org/10.31399/asm.cp.am-epri-2024p1008

View Articletitled, Demonstration of Thick-Section Welding of Haynes 282 to Steel

Assessment of 316H Stainless Steel Produced by Directed Energy Deposition Additive Manufacturing for High Temperature Power Plant Applications

Ben Sutton; Eun Jang; Stephen Tate; John Shingledecker

am-epri 2024; 1020-1032https://doi.org/10.31399/asm.cp.am-epri-2024p1020

View Articletitled, Assessment of 316H Stainless Steel Produced by Directed Energy Deposition Additive Manufacturing for High Temperature Power Plant Applications

Materials Technology for Innovative Thermal Power Generation System Toward Carbon Neutrality in Japan

Masao Takeyama

am-epri 2024; 1033-1043https://doi.org/10.31399/asm.cp.am-epri-2024p1033

View Articletitled, Materials Technology for Innovative Thermal Power Generation System Toward Carbon Neutrality in Japan

Industrial Application of Local Vacuum Electron Beam Welding for Nuclear Reactor Components

Jacob Pope; Michael Blackmore; Jesus Talamantes-Silva

am-epri 2024; 1044-1053https://doi.org/10.31399/asm.cp.am-epri-2024p1044

View Articletitled, Industrial Application of Local Vacuum Electron Beam Welding for Nuclear Reactor Components

Evaluation of Directed Energy Deposition 316LSi Stainless Steel Pressure Boundary Parts

Stephen Tate; Ben Schaeffer; Brad Barnhart

am-epri 2024; 1054-1065https://doi.org/10.31399/asm.cp.am-epri-2024p1054

View Articletitled, Evaluation of Directed Energy Deposition 316LSi Stainless Steel Pressure Boundary Parts

Nitridation Resistance of Several Modern High-Temperature Nickel- and Cobalt-Based Alloys

Brett Tossey; Bingtao Li

am-epri 2024; 1066-1074https://doi.org/10.31399/asm.cp.am-epri-2024p1066

View Articletitled, Nitridation Resistance of Several Modern High-Temperature Nickel- and Cobalt-Based Alloys

Cracking of Grade 91 Steel Welds in Longer-Term Service - Case Studies

Terry Totemeier; Wendy Weiss; Tony Studer; Steven Gressler

am-epri 2024; 1075-1086https://doi.org/10.31399/asm.cp.am-epri-2024p1075

View Articletitled, Cracking of Grade 91 Steel Welds in Longer-Term Service - Case Studies

Qualifying Additively Manufactured Eurofer97 Reduced Activation Steel for Fusion

Andrej Turk; Shaumik Lenka; Dhairyasheel Patil; Shanoob Balachandran-Nair; Callum Churchman; Alex Gullane; David Crudden

am-epri 2024; 1087-1102https://doi.org/10.31399/asm.cp.am-epri-2024p1087

View Articletitled, Qualifying Additively Manufactured Eurofer97 Reduced Activation Steel for Fusion

Tensile Testing in High Pressure Gaseous Hydrogen Using the Tubular Specimen Method

Stephan Elsen-Humberg; Fabian Unterumsberger; Tomas Freitas; Heiner Oesterlin; Peter Ruchti

am-epri 2024; 1103-1113https://doi.org/10.31399/asm.cp.am-epri-2024p1103

View Articletitled, Tensile Testing in High Pressure Gaseous Hydrogen Using the Tubular Specimen Method

Claddings, Coatings, and Surface Modification: Load Behavior of Hardfaced Sealing Surfaces of Fittings

Stephan Elsen-Humberg; Fabian Unterumsberger

am-epri 2024; 1114-1125https://doi.org/10.31399/asm.cp.am-epri-2024p1114

View Articletitled, Claddings, Coatings, and Surface Modification: Load Behavior of Hardfaced Sealing Surfaces of Fittings

Investigation of Novel Nickel-Based Alloys for High Temperature Molten Chloride Salt Reactor Structural Applications

N. Naveen Kumar; Sonali Ravikumar; Boateng Twum Donkor; Jie Song; Vishal Soni; Abhishek Sharma; Sriswaroop Dasari; Gopal B. Viswanathan; Harjot Singh; Qinyun Chen; Rajarshi Banerjee; Matthew A. Steiner; Steven J. Zinkle; G. Muralidharan; Vilupanur A. Ravi; Vijay K. Vasudevan

am-epri 2024; 1126-1137https://doi.org/10.31399/asm.cp.am-epri-2024p1126

View Articletitled, Investigation of Novel Nickel-Based Alloys for High Temperature Molten Chloride Salt Reactor Structural Applications

Phase-Field Modeling of Diffusion Bonding in 316H Stainless Steel for Nuclear Engineering Applications

Rui Wang; Peng Wang; Todd R. Allen; Fei Gao; Sagar Bhatt; Mark C. Messner; Ian W. Jentz

am-epri 2024; 1138-1148https://doi.org/10.31399/asm.cp.am-epri-2024p1138

View Articletitled, Phase-Field Modeling of Diffusion Bonding in 316H Stainless Steel for Nuclear Engineering Applications

Microstructural and Mechanical Evolution of High Temperature Proton Irradiated FeCrMnNi Concentrated Solid-Solution Alloy

Qiang Wang; Cong Dai; Travis Skippon; Amy Fluke; Hui Yuan; Fei Long; Mark R. Daymond

am-epri 2024; 1149-1160https://doi.org/10.31399/asm.cp.am-epri-2024p1149

View Articletitled, Microstructural and Mechanical Evolution of High Temperature Proton Irradiated FeCrMnNi Concentrated Solid-Solution Alloy

Fatigue and Creep-Fatigue Evaluation of Alloy 709 at 760 and 816°C

Yanli Wang; Ting-Leung Sham

am-epri 2024; 1161-1171https://doi.org/10.31399/asm.cp.am-epri-2024p1161

View Articletitled, Fatigue and Creep-Fatigue Evaluation of Alloy 709 at 760 and 816°C

Assessment of a Grade 91 Steel Forging and Seamless Pipe Section After 141,000-Hours of Operation in a Superheat Outlet Header

Yiyu Wang; Wei Zhang; Yanli Wang; Zhili Feng; John Siefert; Alex Bridges; Steven Kung

am-epri 2024; 1172-1182https://doi.org/10.31399/asm.cp.am-epri-2024p1172

View Articletitled, Assessment of a Grade 91 Steel Forging and Seamless Pipe Section After 141,000-Hours of Operation in a Superheat Outlet Header

Machining Methods and Their Effect on the Fatigue Performance of SA508 Gr3 Class 2 and 316L Steels

Krystian K. Wika; Lee Waterhouse; Mark D. Callaghan; Charles Carpenter; David Coon; Andrew Wright

am-epri 2024; 1183-1194https://doi.org/10.31399/asm.cp.am-epri-2024p1183

View Articletitled, Machining Methods and Their Effect on the Fatigue Performance of SA508 Gr3 Class 2 and 316L Steels

The Effect of Post Weld Heat Treatment on the Microstructure and Creep Damage Susceptibility in Grade 92 Steel

G. D. West; T. Moore; M. Strangwood; J. A. Siefert

am-epri 2024; 1195-1206https://doi.org/10.31399/asm.cp.am-epri-2024p1195

View Articletitled, The Effect of Post Weld Heat Treatment on the Microstructure and Creep Damage Susceptibility in Grade 92 Steel

Creep-Fatigue Interaction Life and Prediction Model Based on Stress Relaxation Ratio of Nickel-Based Superalloy 617

Haili WU; Lingen SUN; Linbo MEI

am-epri 2024; 1207-1215https://doi.org/10.31399/asm.cp.am-epri-2024p1207

View Articletitled, Creep-Fatigue Interaction Life and Prediction Model Based on Stress Relaxation Ratio of Nickel-Based Superalloy 617

Effects of Chemical Composition and Heat Treatment on Creep Properties of ASME Grade 91 Type Steel

Masatsugu Yaguchi; Tomoaki Hamaguchi; Kazuhiro Miki; Kyohei Nomura; Nobuyoshi Komai

am-epri 2024; 1216-1227https://doi.org/10.31399/asm.cp.am-epri-2024p1216

View Articletitled, Effects of Chemical Composition and Heat Treatment on Creep Properties of ASME Grade 91 Type Steel

Estimation of Creep Strength of ASME Grade 91 Type Steel in Actual Service Conditions

Masatsugu Yaguchi; Tomoaki Hamaguchi; Masao Yuga; Kyohei Nomura; Nobuyoshi Komai

am-epri 2024; 1228-1239https://doi.org/10.31399/asm.cp.am-epri-2024p1228

View Articletitled, Estimation of Creep Strength of ASME Grade 91 Type Steel in Actual Service Conditions

Characterization of Precipitation-Strengthening Heat-Resistant Austenitic Stainless Steels for Life-Prediction Modeling

Yukinori Yamamoto; Qing-Qiang Ren; Rishi Pillai; David Hoelzer; Michael Brady; Yajie Zhao; Jonathan Poplawsky; Edgar Lala-Curzio; Arul Kumar Mariyappan; Ricardo Lebensohn; Laurent Capolungo; Michael Glazoff; Michael Gao; Martin Detrois; Paul Jablonski; Jeffery Hawk; David Alman

am-epri 2024; 1240-1248https://doi.org/10.31399/asm.cp.am-epri-2024p1240

View Articletitled, Characterization of Precipitation-Strengthening Heat-Resistant Austenitic Stainless Steels for Life-Prediction Modeling

Development of PWHT-Free, Reduced Activation Creep-Strength Enhanced Bainitic Ferritic Steel for Large-Scale Fusion Reactor Components

Yukinori Yamamoto; Roger Miller; Tim Graening; Arunodaya Bhattacharya; M. Grace Burke

am-epri 2024; 1249-1256https://doi.org/10.31399/asm.cp.am-epri-2024p1249

View Articletitled, Development of PWHT-Free, Reduced Activation Creep-Strength Enhanced Bainitic Ferritic Steel for Large-Scale Fusion Reactor Components

Effect of Grain-Boundary TCP P(oP56) Phase on Creep in Ni-Cr-Mo Alloys at Elevated Temperatures

Takehiko Yanagiya; Masato Yoshida; Kunihiko Hashi; Ryota Nagashima; Masao Takeyama

am-epri 2024; 1257-1268https://doi.org/10.31399/asm.cp.am-epri-2024p1257

View Articletitled, Effect of Grain-Boundary TCP P(oP56) Phase on Creep in Ni-Cr-Mo Alloys at Elevated Temperatures

Rejuvenation and Life Assessment of IN 738 Blades after Long-Term Service

Sungho Yang; Sanghun Kim; Hyosung Kim; Junsu Park

am-epri 2024; 1269-1278https://doi.org/10.31399/asm.cp.am-epri-2024p1269

View Articletitled, Rejuvenation and Life Assessment of IN 738 Blades after Long-Term Service

Oxidation and Mechanical Properties of Ultrafine-Grained MoSiBTiC Alloy Produced by Rapid Solidification

Kyosuke Yoshimi; Naoma Abe; Xi Nan; Shuntaro Ida; Takeshi Wada; Hidemi Kato

am-epri 2024; 1279-1288https://doi.org/10.31399/asm.cp.am-epri-2024p1279

View Articletitled, Oxidation and Mechanical Properties of Ultrafine-Grained MoSiBTiC Alloy Produced by Rapid Solidification

Creep Deformation and Rupture Properties of Long-Term Used Super 304H Steel Boiler Tubes

Shengde Zhang; Hayato Tokunaga; Kenji Kako; Masatsugu Yaguchi; Koji Tamura; Yusuke Minami

am-epri 2024; 1289-1299https://doi.org/10.31399/asm.cp.am-epri-2024p1289

View Articletitled, Creep Deformation and Rupture Properties of Long-Term Used Super 304H Steel Boiler Tubes

Statistical Analysis and Effect of Product Chemistry and Grain Size on the High Temperature Creep Properties of 316 Stainless Steels

Shutong Zhang; Alex Bridges; John Shingledecker; Tapasvi Lolla; Rohan Acharya

am-epri 2024; 1300-1312https://doi.org/10.31399/asm.cp.am-epri-2024p1300

View Articletitled, Statistical Analysis and Effect of Product Chemistry and Grain Size on the High Temperature Creep Properties of 316 Stainless Steels

Modeling-Based Design and Optimization of a Gradient Composite Transition Joint

Wei Zhang; Yiyu Wang; Yanli Wang; Zhili Feng; Shanshan Hu; Xingbo Liu; Haiyang Qian

am-epri 2024; 1313-1319https://doi.org/10.31399/asm.cp.am-epri-2024p1313

View Articletitled, Modeling-Based Design and Optimization of a Gradient Composite Transition Joint

An Engineering Approach for Weld Creep Lifetime Assessment Based on Local Property Measurement

Wei Zhanga; Yiyu Wanga; Yanli Wanga; Zhili Fenga; John Siefertb; Alex Bridgesb; Steven Kungb

am-epri 2024; 1320-1330https://doi.org/10.31399/asm.cp.am-epri-2024p1320

View Articletitled, An Engineering Approach for Weld Creep Lifetime Assessment Based on Local Property Measurement

Interactions Between U-Bearing Fluoride Fuel Salts and Graphite

Jaewoo Park; Amanda Leong; Jinsuo Zhang

am-epri 2024; 1331-1337https://doi.org/10.31399/asm.cp.am-epri-2024p1331

View Articletitled, Interactions Between U-Bearing Fluoride Fuel Salts and Graphite

Organizing Committee, International Advisory Board, and Technical Review Team

am-epri 2024; iii-vhttps://doi.org/10.31399/asm.cp.am-epri-2024fm01

View Articletitled, Organizing Committee, International Advisory Board, and Technical Review Team