Volumes | Advances in Materials for Power Plants | ASM International

Skip to Main Content

Skip Nav Destination

Advances in Materials Technology for Fossil Power Plants: Proceedings from the Seventh International Conference

Plenary Session

Progress of China 700°C USC Development Program

Rui Sun; Zhanzhong Cui; Ye Tao

am-epri 2013; 1-8https://doi.org/10.31399/asm.cp.am-epri-2013p0001

View Articletitled, Progress of China 700°C USC Development Program

ENCIO Project: A European Approach to 700°C Power Plant

A. Di Gianfrancesco; A. Tizzanini; M. Jedamzik; C. Stolzenberger

am-epri 2013; 9-23https://doi.org/10.31399/asm.cp.am-epri-2013p0009

View Articletitled, ENCIO Project: A European Approach to 700°C Power Plant

Advanced USC Technology Development in Japan

Masafumi Fukuda; Eiji Saito; Hiroyuki Semba; Jun Iwasaki; Sakae Izumi; Shinichi Takano; Takeo Takahashi; Yasuo Sumiyoshi

am-epri 2013; 24-40https://doi.org/10.31399/asm.cp.am-epri-2013p0024

View Articletitled, Advanced USC Technology Development in Japan

Current Status of the U.S. DOE/OCDO A-USC Materials Technology Research and Development Program

J. Shingledecker; R. Purgert; P. Rawls

am-epri 2013; 41-52https://doi.org/10.31399/asm.cp.am-epri-2013p0041

View Articletitled, Current Status of the U.S. DOE/OCDO A-USC Materials Technology Research and Development Program

India's National A-USC Mission - Plan and Progress

Alok Mathur; O.P Bhutani; T. Jayakumar; D.K. Dubey; S.C. Chetal

am-epri 2013; 53-59https://doi.org/10.31399/asm.cp.am-epri-2013p0053

View Articletitled, India's National A-USC Mission - Plan and Progress

Advantages of A-USC for CO₂ Capture in Pulverized Coal Units

H.L. Hendrix

am-epri 2013; 60-73https://doi.org/10.31399/asm.cp.am-epri-2013p0060

View Articletitled, Advantages of A-USC for CO<sub>2</sub> Capture in Pulverized Coal Units

Nickel-Based Alloys

NextGenPower – Demonstration and Component Fabrication of Nickel Alloys and Protective Coatings for Steam Temperatures of 750°C

Arthur F. Stam

am-epri 2013; 74-85https://doi.org/10.31399/asm.cp.am-epri-2013p0074

View Articletitled, NextGenPower – Demonstration and Component Fabrication of Nickel Alloys and Protective Coatings for Steam Temperatures of 750°C

A Steam Generator for 700C to 760C Advanced Ultra-Supercritical Design and Plant Arrangement: What Stays the Same and What Needs to Change

Paul S. Weitzel

am-epri 2013; 86-97https://doi.org/10.31399/asm.cp.am-epri-2013p0086

View Articletitled, A Steam Generator for 700C to 760C Advanced Ultra-Supercritical Design and Plant Arrangement: What Stays the Same and What Needs to Change

An Investigation on Structure Stability of Advanced Austenitic Heat-Resisting Steels and Ni-Base Superalloys for 600–700 °C A-USC Power Plant Application

Xishan Xie; Chengyu Chi; Qiuying Yu; Zhihao Yao; Maichang Zhang; Yaohe Hu; Jianxin Dong; Hongyao Yu; Shuangqun Zhao; Fusheng Lin; Xia Liu; Linbo Mei; Huachun Yang; Mingyang Li

am-epri 2013; 98-119https://doi.org/10.31399/asm.cp.am-epri-2013p0098

View Articletitled, An Investigation on Structure Stability of Advanced Austenitic Heat-Resisting Steels and Ni-Base Superalloys for 600–700 °C A-USC Power Plant Application

Recent Developments in the Characteristics of Haynes 282 Alloy for Use in A-USC Applications

S.K. Srivastava; J.L. Caron; L.M. Pike

am-epri 2013; 120-130https://doi.org/10.31399/asm.cp.am-epri-2013p0120

View Articletitled, Recent Developments in the Characteristics of Haynes 282 Alloy for Use in A-USC Applications

Creep-Rupture Behavior of Precipitation-Strengthened Ni-Based Alloys Under Advanced Ultrasupercritical Steam Conditions

P.F. Tortorelli; K.A. Unocic; H. Wang; M.L. Santella; J.P Shingledecker

am-epri 2013; 131-142https://doi.org/10.31399/asm.cp.am-epri-2013p0131

View Articletitled, Creep-Rupture Behavior of Precipitation-Strengthened Ni-Based Alloys Under Advanced Ultrasupercritical Steam Conditions

Microstructural Evolution in Cast Haynes 282 for Application in Advanced Power Plants

Y. Yang; R. C. Thomson; R. M. Leese; S. Roberts

am-epri 2013; 143-154https://doi.org/10.31399/asm.cp.am-epri-2013p0143

View Articletitled, Microstructural Evolution in Cast Haynes 282 for Application in Advanced Power Plants

Investigations on Nickel Based Alloys and Welds for A-USC Applications

Andreas Klenk; Karl Maile

am-epri 2013; 155-166https://doi.org/10.31399/asm.cp.am-epri-2013p0155

View Articletitled, Investigations on Nickel Based Alloys and Welds for A-USC Applications

Qualification and Experience on A 617 and C 263 Boiler Tubes

Patrik Schraven

am-epri 2013; 167-170https://doi.org/10.31399/asm.cp.am-epri-2013p0167

View Articletitled, Qualification and Experience on A 617 and C 263 Boiler Tubes

Material Advancements for 700°C A-USC-Power Plants in China

Zhengdong Liu; Hansheng Bao; Gang Yang; Songqian Xu; Qijiang Wang; Yujun Yang

am-epri 2013; 171-179https://doi.org/10.31399/asm.cp.am-epri-2013p0171

View Articletitled, Material Advancements for 700°C A-USC-Power Plants in China

Creep Crack Growth Behavior as a Superalloy Selection Consideration for A-USC Power Plant Applications

Falk Mueller; Alfred Scholz; Matthias Oechsner

am-epri 2013; 180-189https://doi.org/10.31399/asm.cp.am-epri-2013p0180

View Articletitled, Creep Crack Growth Behavior as a Superalloy Selection Consideration for A-USC Power Plant Applications

Fabrication Trials of Ni-Based Alloys for Advanced USC Boiler Application

Nobuhiko Saito; Nobuyoshi Komai; Yasuhiro Takei

am-epri 2013; 190-201https://doi.org/10.31399/asm.cp.am-epri-2013p0190

View Articletitled, Fabrication Trials of Ni-Based Alloys for Advanced USC Boiler Application

Development and Trial Manufacturing of Ni-Base Alloys for Coal Fired Power Plant with Temperature Capability 800°C

Shinya Imano; Naoya Sato; Hironori Kamoshida

am-epri 2013; 202-214https://doi.org/10.31399/asm.cp.am-epri-2013p0202

View Articletitled, Development and Trial Manufacturing of Ni-Base Alloys for Coal Fired Power Plant with Temperature Capability 800°C

Manufacturing Demonstration of Inconel Alloy 740H for A-USC Boilers

B. A. Baker; R. D. Gollihue; J. J. deBarbadillo; S. J. Patel; D. Maitra

am-epri 2013; 215-229https://doi.org/10.31399/asm.cp.am-epri-2013p0215

View Articletitled, Manufacturing Demonstration of Inconel Alloy 740H for A-USC Boilers

Creep-Rupture Performance of Inconel Alloy 740 and Welds

J.P. Shingledecker

am-epri 2013; 230-241https://doi.org/10.31399/asm.cp.am-epri-2013p0230

View Articletitled, Creep-Rupture Performance of Inconel Alloy 740 and Welds

Evaluation of High Temperature Strength of a Ni-Base Alloy 740H for Advanced Ultra-Supercritical Power Plant

Shengde Zhang; Yukio Takahashi

am-epri 2013; 242-253https://doi.org/10.31399/asm.cp.am-epri-2013p0242

View Articletitled, Evaluation of High Temperature Strength of a Ni-Base Alloy 740H for Advanced Ultra-Supercritical Power Plant

Cyclic Properties of 50Ni-24Cr-20Co-0.6Mo-1Al-1.6Ti-2Nb Alloy at Advanced USC Steam Temperature

U V Gururaja; A Patra; P Mukhopadhyay; M Narayana Rao

am-epri 2013; 254-264https://doi.org/10.31399/asm.cp.am-epri-2013p0254

View Articletitled, Cyclic Properties of 50Ni-24Cr-20Co-0.6Mo-1Al-1.6Ti-2Nb Alloy at Advanced USC Steam Temperature

Microstructure Evolution and Precipitates Stability in Inconel Alloy 740H during Creep

Shuangqun Zhao; Fusheng Lin; Rui Fu; Chengyu Chi; Xishan Xie

am-epri 2013; 265-275https://doi.org/10.31399/asm.cp.am-epri-2013p0265

View Articletitled, Microstructure Evolution and Precipitates Stability in Inconel Alloy 740H during Creep

Discussion of Delivered Condition Specified in ASME Code Case 2702 on Inconel 740H Used for A-USC Boiler

Hua-Chun Yang; Lin-Sen Wang; Dong-Ping Wang; Shi-Yong Mao; Xiao-Chuan Yang; Xian-Hong Lai; Jin-Bing Yang; Wen Yang

am-epri 2013; 276-280https://doi.org/10.31399/asm.cp.am-epri-2013p0276

View Articletitled, Discussion of Delivered Condition Specified in ASME Code Case 2702 on Inconel 740H Used for A-USC Boiler

Turbine Materials and Applications

Gas and Steam Turbine Forgings for High Efficiency Fossil Power Plants

Guenter Zeiler; Albert Putschoegl

am-epri 2013; 281-292https://doi.org/10.31399/asm.cp.am-epri-2013p0281

View Articletitled, Gas and Steam Turbine Forgings for High Efficiency Fossil Power Plants

Microstructural Change after Long-Term Creep Exposure in High Cr Steel Forgings for Ultrasupercritical Steam Turbine Rotors

Masato Mikami; Kota Sawada; Satoru Kobayashi; Toru Hara; Kazuhiro Kimura

am-epri 2013; 293-303https://doi.org/10.31399/asm.cp.am-epri-2013p0293

View Articletitled, Microstructural Change after Long-Term Creep Exposure in High Cr Steel Forgings for Ultrasupercritical Steam Turbine Rotors

Experience in Manufacture of High Chromium Forged Rotor Steels

A. Di Gianfrancesco; S. Budano; P. Lombardi; M. Paura; S. Neri; M. Calderini; N. Longari

am-epri 2013; 304-320https://doi.org/10.31399/asm.cp.am-epri-2013p0304

View Articletitled, Experience in Manufacture of High Chromium Forged Rotor Steels

Manufacturing of Trial Rotor Forging of 9%Cr Steel Containing Co and B (X13CrMoCoVNbNB9-2-1) for Ultrasupercritical Steam Turbines

M. Nakano; K. Kawano; M. Mikami

am-epri 2013; 321-332https://doi.org/10.31399/asm.cp.am-epri-2013p0321

View Articletitled, Manufacturing of Trial Rotor Forging of 9%Cr Steel Containing Co and B (X13CrMoCoVNbNB9-2-1) for Ultrasupercritical Steam Turbines

Development and Production of Monoblock Low-Pressure Turbine Rotor Shaft Made from 670 Ton Ingot

Takafumi Yamauchi; Hidenao Kudo; Yasuhiro Kishi; Sou Ueda; Hajime Yoshida; Kimitoshi Kimura; Koji Kajikawa; Shigeru Suzuki

am-epri 2013; 333-343https://doi.org/10.31399/asm.cp.am-epri-2013p0333

View Articletitled, Development and Production of Monoblock Low-Pressure Turbine Rotor Shaft Made from 670 Ton Ingot

High Cycle Fatigue Properties of Steam Turbine Materials at High Temperature Under Superheated Steam Conditions

Jan Dzugan; Tomáš Míšek; Josef Jurenka

am-epri 2013; 344-350https://doi.org/10.31399/asm.cp.am-epri-2013p0344

View Articletitled, High Cycle Fatigue Properties of Steam Turbine Materials at High Temperature Under Superheated Steam Conditions

Creep and Creep-Fatigue Crack Growth Behaviors of 30Cr1Mo1V Rotor Steel after Long Term Service

Kexian Shi; Fusheng Lin; Shuangqun Zhao; Yanfeng Wang

am-epri 2013; 351-359https://doi.org/10.31399/asm.cp.am-epri-2013p0351

View Articletitled, Creep and Creep-Fatigue Crack Growth Behaviors of 30Cr1Mo1V Rotor Steel after Long Term Service

The Effect of Water Vapor Content and CO₂ on TBC Lifetime

B. A. Pint; K. A. Unocic; J. A. Haynes

am-epri 2013; 360-370https://doi.org/10.31399/asm.cp.am-epri-2013p0360

View Articletitled, The Effect of Water Vapor Content and CO<sub>2</sub> on TBC Lifetime

Formation of Diffusion Zones in Coated Ni-Al-X Ternary Alloys and Ni-Based Superalloys

A. S. Suzuki; G. D. West; R. C. Thomson

am-epri 2013; 371-381https://doi.org/10.31399/asm.cp.am-epri-2013p0371

View Articletitled, Formation of Diffusion Zones in Coated Ni-Al-X Ternary Alloys and Ni-Based Superalloys

High-Temperature Solid Particle Erosion Testing Standard for Advanced Power Plant Materials and Coatings

V.P. "Swami" Swaminathan; Jeffery S. Smith; David W. Gandy

am-epri 2013; 382-399https://doi.org/10.31399/asm.cp.am-epri-2013p0382

View Articletitled, High-Temperature Solid Particle Erosion Testing Standard for Advanced Power Plant Materials and Coatings

Metrology to Enable High Temperature Erosion Testing – A New European Initiative

A.T. Fry; M.G. Gee; S. Clausen; U. Neuschaefer-Rube; M. Bartscher; D. Spaltmann; M. Woydt; S. Radek; F. Cernuschi; J.R. Nicholls; T.W. Rose

am-epri 2013; 400-411https://doi.org/10.31399/asm.cp.am-epri-2013p0400

View Articletitled, Metrology to Enable High Temperature Erosion Testing – A New European Initiative

NiCoCrAlYHf Coating Evolution through Multiple Refurbishment Processing on a Single Crystal Nickel Superalloy

A Rowe; M Karunaratne; R C Thomson

am-epri 2013; 412-423https://doi.org/10.31399/asm.cp.am-epri-2013p0412

View Articletitled, NiCoCrAlYHf Coating Evolution through Multiple Refurbishment Processing on a Single Crystal Nickel Superalloy

Microstructural Evolution in a Ni- Based Superalloy for Power Plant Applications as a Consequence of High Temperature Degradation and Rejuvenation Heat Treatments

Z. Yao; M. A. E. Jepson; R. C. Thomson; C. C. Degnan

am-epri 2013; 424-435https://doi.org/10.31399/asm.cp.am-epri-2013p0424

View Articletitled, Microstructural Evolution in a Ni- Based Superalloy for Power Plant Applications as a Consequence of High Temperature Degradation and Rejuvenation Heat Treatments

Development and Evaluation of Large-Scale Rotor Forging for Over 700 °C-Class A-USC Steam Turbine

Shigekazu Miyashita; Yomei Yoshioka; Takahiro Kubo

am-epri 2013; 436-447https://doi.org/10.31399/asm.cp.am-epri-2013p0436

View Articletitled, Development and Evaluation of Large-Scale Rotor Forging for Over 700 °C-Class A-USC Steam Turbine

Rotor Forgings for Steam Turbines with High Efficiency

N. Blaes; B. Donth; A. Diwo; D. Bokelmann

am-epri 2013; 448-458https://doi.org/10.31399/asm.cp.am-epri-2013p0448

View Articletitled, Rotor Forgings for Steam Turbines with High Efficiency

Similar and Dissimilar Welding of Nickel-Based Superalloys for A-USC Steam Turbine Rotors in NextGenPower Project

Stanislav Hreben; Petr Vitek; Vaclav Zednik; Lubos Prchlik

am-epri 2013; 459-467https://doi.org/10.31399/asm.cp.am-epri-2013p0459

View Articletitled, Similar and Dissimilar Welding of Nickel-Based Superalloys for A-USC Steam Turbine Rotors in NextGenPower Project

Development and Trial Manufacturing of Ni-Based Superalloy “LTES700R” for Advanced 700C Class Steam Turbines

Ryuichi Yamamoto; Yoshikuni Kadoya; Shin Nishimoto; Yoshinori Tanaka; Takuma Okajima; Kouichi Ishikawa; Kouichi Uno

am-epri 2013; 468-481https://doi.org/10.31399/asm.cp.am-epri-2013p0468

View Articletitled, Development and Trial Manufacturing of Ni-Based Superalloy “LTES700R” for Advanced 700C Class Steam Turbines

Tribolayer Formation by Strain-Induced Transformations in Hardfacing Alloys

Ryan Smith; J. Siefert; D. Gandy; S. S. Babu

am-epri 2013; 482-490https://doi.org/10.31399/asm.cp.am-epri-2013p0482

View Articletitled, Tribolayer Formation by Strain-Induced Transformations in Hardfacing Alloys

Advances in Nickel Alloy Casting Production for +700 °C Applications

S. Birks; S. Roberts; R. Leese

am-epri 2013; 491-503https://doi.org/10.31399/asm.cp.am-epri-2013p0491

View Articletitled, Advances in Nickel Alloy Casting Production for +700 °C Applications

Trial Production of Alloy 625 and Alloy 617 Casting Component for Advanced 700°C Class Steam Turbines

Yuichi Hirakawa; Yoshikuni Kadoya; Shin Nishimoto; Yoshinori Tanaka

am-epri 2013; 504-512https://doi.org/10.31399/asm.cp.am-epri-2013p0504

View Articletitled, Trial Production of Alloy 625 and Alloy 617 Casting Component for Advanced 700°C Class Steam Turbines

Alloys T23 and T24

Material Behavior of T23 and T24

John A. Siefert; John N. DuPont

am-epri 2013; 513-524https://doi.org/10.31399/asm.cp.am-epri-2013p0513

View Articletitled, Material Behavior of T23 and T24

Supercritical Unit Experience with Grade T23 Evaporator Tube Failures

Eric Dupont

am-epri 2013; 525-536https://doi.org/10.31399/asm.cp.am-epri-2013p0525

View Articletitled, Supercritical Unit Experience with Grade T23 Evaporator Tube Failures

Research on Water Wall Tubes and Welded Joints of 1000MW USC Tower Boiler

B.C. Wang; Xu Xueyuan; Zhu Yu Feng; Qi Anfang; Lu Zhengran; Zhang Bo; Jin Yongqiang; Lu Xiaoli

am-epri 2013; 537-548https://doi.org/10.31399/asm.cp.am-epri-2013p0537

View Articletitled, Research on Water Wall Tubes and Welded Joints of 1000MW USC Tower Boiler

T/P24 (7CRMOVTIB10-10) a Bainitic-Martensitic Steel Grade for Super Heater and Water Wall Applications in Modern Ultra Super Critical Power Plants: Lessons Learned

M. Jarrar; G. Gevelmann; H. Heuser; K.G. Tak

am-epri 2013; 549-564https://doi.org/10.31399/asm.cp.am-epri-2013p0549

View Articletitled, T/P24 (7CRMOVTIB10-10) a Bainitic-Martensitic Steel Grade for Super Heater and Water Wall Applications in Modern Ultra Super Critical Power Plants: Lessons Learned

Potential Effects of HAZ Hardness on Use of T24 Tubing for Waterwall Applications

P. Moody; P. Barnard

am-epri 2013; 565-572https://doi.org/10.31399/asm.cp.am-epri-2013p0565

View Articletitled, Potential Effects of HAZ Hardness on Use of T24 Tubing for Waterwall Applications

Phase Transformations and Microstructure in Gas Tungsten Arc Welds of Grade 23 Steel Tubing

B.T. Alexandrov; J.M. Steiner; K.C. Strader; X. Feng; J.C. Lippold; J.E. Dierksheide; J.M. Tanzosh

am-epri 2013; 573-585https://doi.org/10.31399/asm.cp.am-epri-2013p0573

View Articletitled, Phase Transformations and Microstructure in Gas Tungsten Arc Welds of Grade 23 Steel Tubing

Grade 91 and 92 Steels

Misorientation Change Caused by the Precipitation Strengthening through Several MX Type Precipitates in High Cr Ferritic Creep Resistant Steels

Ryosuke Yamagata; Yasushi Hasegawa

am-epri 2013; 586-595https://doi.org/10.31399/asm.cp.am-epri-2013p0586

View Articletitled, Misorientation Change Caused by the Precipitation Strengthening through Several MX Type Precipitates in High Cr Ferritic Creep Resistant Steels

Investigation of Creep Damage and Cavitation Mechanisms in P92 Steels

Y. Gu; G.D. West; R.C. Thomson; J. Parker

am-epri 2013; 596-606https://doi.org/10.31399/asm.cp.am-epri-2013p0596

View Articletitled, Investigation of Creep Damage and Cavitation Mechanisms in P92 Steels

Effect of Stress State on Microstructural Change during Creep in Grade 92 Steel Welded Joint

Kota Sawada; Kazuhiro Kimura; Masaaki Tabuchi

am-epri 2013; 607-614https://doi.org/10.31399/asm.cp.am-epri-2013p0607

View Articletitled, Effect of Stress State on Microstructural Change during Creep in Grade 92 Steel Welded Joint

The Effect of Post Weld Heat Treatment on the Creep Behaviour and Microstructural Evolution in Grade 92 Steel Welds for Steam Pipe Applications

X. Xu; G.D. West; R.C. Thomson; J. Parker

am-epri 2013; 615-626https://doi.org/10.31399/asm.cp.am-epri-2013p0615

View Articletitled, The Effect of Post Weld Heat Treatment on the Creep Behaviour and Microstructural Evolution in Grade 92 Steel Welds for Steam Pipe Applications

Effects of Cr and W Content in High Cr Ferritic Heat-Resistant Steels on Long-Term Creep Rupture Strength

Yusuke Mito; Kazuhiro Miki; Tsukasa Azuma; Tohru Ishiguro; Osamu Tamura; Yoshinori Murata; Masahiko Morinaga

am-epri 2013; 627-636https://doi.org/10.31399/asm.cp.am-epri-2013p0627

View Articletitled, Effects of Cr and W Content in High Cr Ferritic Heat-Resistant Steels on Long-Term Creep Rupture Strength

Heat-to-Heat Variation in Creep Rupture Ductility of ASME Gr.91 Steels in the Long-Term-Investigation into Recovery of Microstructure and Void Formation

Satoru Kobayashi; Kota Sawada; Toru Hara; Hideaki Kushima; Kazuhiro Kimura

am-epri 2013; 637-647https://doi.org/10.31399/asm.cp.am-epri-2013p0637

View Articletitled, Heat-to-Heat Variation in Creep Rupture Ductility of ASME Gr.91 Steels in the Long-Term-Investigation into Recovery of Microstructure and Void Formation

Experiences in the Production and Welding of 9-12 % Cr Steels Explained on Grades 92 and VM12-SHC for USC Power Plants

Vida Knezevic; Marko Subanovic; Olivier Hamart; H. Heuser; K.G. Tak

am-epri 2013; 648-666https://doi.org/10.31399/asm.cp.am-epri-2013p0648

View Articletitled, Experiences in the Production and Welding of 9-12 % Cr Steels Explained on Grades 92 and VM12-SHC for USC Power Plants

Creep-Fatigue Interaction in Grade 92 Steel and Its Predictability

Yukio Takahashi; Jonathan Parker; David Gandy

am-epri 2013; 667-678https://doi.org/10.31399/asm.cp.am-epri-2013p0667

View Articletitled, Creep-Fatigue Interaction in Grade 92 Steel and Its Predictability

Creep-Fatigue Properties of Grade 91 Steel

Rami Pohja; Asta Nurmela; Pekka Moilanen; Stefan Holmström

am-epri 2013; 679-689https://doi.org/10.31399/asm.cp.am-epri-2013p0679

View Articletitled, Creep-Fatigue Properties of Grade 91 Steel

Evaluation of Remaining Life of Gr.91 Welded Elbow Served at USC Plant for Long-Term

Seiji Nagai; Masatsugu Yaguchi; Shan Lin; Souichi Yamazaki

am-epri 2013; 690-701https://doi.org/10.31399/asm.cp.am-epri-2013p0690

View Articletitled, Evaluation of Remaining Life of Gr.91 Welded Elbow Served at USC Plant for Long-Term

Fracture of Gr. 91 Steel Longitudinal Welded Pipe under Internal Pressure Creep Condition

Masatsugu Yaguchi; Takayuki Sakai; Takashi Ogata; Takuaki Matsumura

am-epri 2013; 702-713https://doi.org/10.31399/asm.cp.am-epri-2013p0702

View Articletitled, Fracture of Gr. 91 Steel Longitudinal Welded Pipe under Internal Pressure Creep Condition

Creep Cavitation in CSEF Steels

J. Parker

am-epri 2013; 714-731https://doi.org/10.31399/asm.cp.am-epri-2013p0714

View Articletitled, Creep Cavitation in CSEF Steels

Evaluation of Long-Term Creep Rupture Life of Strength Enhanced High Cr Ferritic Steel on the Basis of Its Temperature Dependence

K. Maruyama; J. Nakamura; K. Yoshimi

am-epri 2013; 732-743https://doi.org/10.31399/asm.cp.am-epri-2013p0732

View Articletitled, Evaluation of Long-Term Creep Rupture Life of Strength Enhanced High Cr Ferritic Steel on the Basis of Its Temperature Dependence

Creep Damage Evaluation of High Cr Ferritic Steel Based on Change in Hydrogen Desorption Characteristics

Shin-ichi Komazaki; Hayato Yamashita; Mitsuharu Yonemura; Masaaki Igarashi

am-epri 2013; 744-752https://doi.org/10.31399/asm.cp.am-epri-2013p0744

View Articletitled, Creep Damage Evaluation of High Cr Ferritic Steel Based on Change in Hydrogen Desorption Characteristics

Oxidation and Corrosion

High Pressure Steam Oxidation: Extents and Influences

A.T. Fry; M. Seraffon; J. Banks

am-epri 2013; 753-764https://doi.org/10.31399/asm.cp.am-epri-2013p0753

View Articletitled, High Pressure Steam Oxidation: Extents and Influences

Effect of Temperature, Alloy Composition and Surface Treatment on the Steamside Oxidation / Oxide Exfoliation Behavior of Candidate A-USC Boiler Materials

J. M. Sarver; J. M. Tanzosh

am-epri 2013; 765-776https://doi.org/10.31399/asm.cp.am-epri-2013p0765

View Articletitled, Effect of Temperature, Alloy Composition and Surface Treatment on the Steamside Oxidation / Oxide Exfoliation Behavior of Candidate A-USC Boiler Materials

Effect of Oxygen Content of Steam on the Steam Oxidation Behavior of Boiler Tube Materials

K. Nakagawa; Y. Matsunaga; T. Tanoue; T. Hayasaka; K. Matsumura; Y. Takagi

am-epri 2013; 777-790https://doi.org/10.31399/asm.cp.am-epri-2013p0777

View Articletitled, Effect of Oxygen Content of Steam on the Steam Oxidation Behavior of Boiler Tube Materials

Evaluation of Supercritical Oxidation Resistance of Boiler Tube Materials

Sanni Yli-Olli; Satu Tuurna; Sami Penttilä; Pertti Auerkari; Edgardo Coda Zabetta; Kyösti Vänskä

am-epri 2013; 791-802https://doi.org/10.31399/asm.cp.am-epri-2013p0791

View Articletitled, Evaluation of Supercritical Oxidation Resistance of Boiler Tube Materials

Effects of Alloy Composition and Surface Engineering on Steam Oxidation Resistance

B. A. Pint; S. Dryepondt

am-epri 2013; 803-814https://doi.org/10.31399/asm.cp.am-epri-2013p0803

View Articletitled, Effects of Alloy Composition and Surface Engineering on Steam Oxidation Resistance

Steam Oxidation of the Novel Austenitic Steel of Fe-20Cr-30Ni-2Nb (at.%) at 973 K

Mitsutoshi Ueda; Masakazu Yamashita; Kenichi Kawamura; Masao Takeyama; Toshio Maruyama

am-epri 2013; 815-820https://doi.org/10.31399/asm.cp.am-epri-2013p0815

View Articletitled, Steam Oxidation of the Novel Austenitic Steel of Fe-20Cr-30Ni-2Nb (at.%) at 973 K

Managing Oxide Scale Exfoliation in Boilers with TP347H Superheater Tubes

Adrian S. Sabau; Ian G. Wright; John P. Shingledecker; Peter F. Tortorelli

am-epri 2013; 821-831https://doi.org/10.31399/asm.cp.am-epri-2013p0821

View Articletitled, Managing Oxide Scale Exfoliation in Boilers with TP347H Superheater Tubes

Steam Loop Testing of A-USC Materials for Oxidation and Fireside Corrosion - Alstom’s Experience to Date

Reddy Ganta; John Marion; Bruce Wilhelm; Jim Pschirer; Steve Goodstine; Charles Boohaker

am-epri 2013; 832-846https://doi.org/10.31399/asm.cp.am-epri-2013p0832

View Articletitled, Steam Loop Testing of A-USC Materials for Oxidation and Fireside Corrosion - Alstom’s Experience to Date

Inconel Filler Metal 72M Provides Corrosion and Wear Resistance and Low “Delta T” Through Walls of Tubing in Fossil-Fired Boilers

Samuel D. Kiser; Martin Caruso; Rengang Zhang; Brian Gaal

am-epri 2013; 847-862https://doi.org/10.31399/asm.cp.am-epri-2013p0847

View Articletitled, Inconel Filler Metal 72M Provides Corrosion and Wear Resistance and Low “Delta T” Through Walls of Tubing in Fossil-Fired Boilers

Comparison of Coal-Ash Corrosion Resistance of Alloys Exposed to Advanced Air-Coal and Oxy-Coal Combustion Environments

Steven C. Kung

am-epri 2013; 863-880https://doi.org/10.31399/asm.cp.am-epri-2013p0863

View Articletitled, Comparison of Coal-Ash Corrosion Resistance of Alloys Exposed to Advanced Air-Coal and Oxy-Coal Combustion Environments

Fireside Corrosion and Carburization of Superheater Materials in Simulated Oxyfuel Combustion Conditions

Satu Tuurna; Pekka Pohjanne; Sanni Yli-Olli; Edgardo Coda; Kyösti Vänskä

am-epri 2013; 881-891https://doi.org/10.31399/asm.cp.am-epri-2013p0881

View Articletitled, Fireside Corrosion and Carburization of Superheater Materials in Simulated Oxyfuel Combustion Conditions

Effect of Alloy Composition on Fireside Corrosion Rates in Air- and Oxy-Fired Systems

B.A. Pint

am-epri 2013; 892-902https://doi.org/10.31399/asm.cp.am-epri-2013p0892

View Articletitled, Effect of Alloy Composition on Fireside Corrosion Rates in Air- and Oxy-Fired Systems

Welding and Weld Performance

Evaluation of Creep Rupture Strength in Ni-Based Alloy Weldments for an Advanced USC Boiler

Nobuyoshi Komai; Nobuhiko Saito; Yasuhiro Takei

am-epri 2013; 903-913https://doi.org/10.31399/asm.cp.am-epri-2013p0903

View Articletitled, Evaluation of Creep Rupture Strength in Ni-Based Alloy Weldments for an Advanced USC Boiler

Study of Creep Damage in Creep Exposed Martensitic High-Chromium Steel Weldments

C. Schlacher; C. Béal; C. Sommitsch; H. Toda; P. Mayr

am-epri 2013; 914-923https://doi.org/10.31399/asm.cp.am-epri-2013p0914

View Articletitled, Study of Creep Damage in Creep Exposed Martensitic High-Chromium Steel Weldments

Creep Properties of Heat Affected Zone in Heterogeneous Welded Rotor

Jan Dzugan; Zbysek Novy; Pavel Konopik; Pavel Podany; Eva Folková

am-epri 2013; 924-935https://doi.org/10.31399/asm.cp.am-epri-2013p0924

View Articletitled, Creep Properties of Heat Affected Zone in Heterogeneous Welded Rotor

Flux Cored Wires for Welding Advanced 9-10% Cr Steels

Susanne Baumgartner; Ronald Schnitzer; Monika Schuler; Edina Schmidtne-Kelity; Claus Lochbichler

am-epri 2013; 936-947https://doi.org/10.31399/asm.cp.am-epri-2013p0936

View Articletitled, Flux Cored Wires for Welding Advanced 9-10% Cr Steels

Investigations on the Degradation Mechanism of Welded Joints of Advanced 9%Cr-Mo-Co-B Steel Used for 620°C USC Steam Turbine

Xiufang Gong; Zhenhuan Gao; Liping Nie; Bo Zhang; Lei Jiang; Bangqiang Zhang; Gongxian Yang; Congping Zhang

am-epri 2013; 948-959https://doi.org/10.31399/asm.cp.am-epri-2013p0948

View Articletitled, Investigations on the Degradation Mechanism of Welded Joints of Advanced 9%Cr-Mo-Co-B Steel Used for 620°C USC Steam Turbine

Creep Degradation and Life Assessment of High Temperature Welds

Fujimitsu Masuyama; Tomiko Yamaguchi

am-epri 2013; 960-972https://doi.org/10.31399/asm.cp.am-epri-2013p0960

View Articletitled, Creep Degradation and Life Assessment of High Temperature Welds

Qualifying Welding Procedures for Repair of High Temperature Components

William F. Newell

am-epri 2013; 973-981https://doi.org/10.31399/asm.cp.am-epri-2013p0973

View Articletitled, Qualifying Welding Procedures for Repair of High Temperature Components

Influence of Trace RE Element on Properties and Microstructures of SA335P91 Weld Metal

Haoyang Du; Mingliang Du; Jian Yang; Laichang Hou; Yongmei Yang

am-epri 2013; 982-991https://doi.org/10.31399/asm.cp.am-epri-2013p0982

View Articletitled, Influence of Trace RE Element on Properties and Microstructures of SA335P91 Weld Metal

Application of EPRI P87 in Dissimilar Austenitic-Martensitic Welded Joints of Tempaloy AA-1 and T92 Steel Grades

Michael Urzynicok; Robert Jachym; Krzysztof Kwieciński; Paola Mariani; Yusuke Minami

am-epri 2013; 992-1005https://doi.org/10.31399/asm.cp.am-epri-2013p0992

View Articletitled, Application of EPRI P87 in Dissimilar Austenitic-Martensitic Welded Joints of Tempaloy AA-1 and T92 Steel Grades

Verification of Long Term Creep Rupture Strength and Component Fabricability of Candidate Ni-Based Materials for A-USC Boilers

T. Tokairin; T. Sato; A. Shimada; R. Nakagawa; M. Kitamura

am-epri 2013; 1006-1015https://doi.org/10.31399/asm.cp.am-epri-2013p1006

View Articletitled, Verification of Long Term Creep Rupture Strength and Component Fabricability of Candidate Ni-Based Materials for A-USC Boilers

Effect of Non-Standard Heat Treatments on Creep Performance of Creep-Strength Enhanced Ferritic (CSEF) Steel Weldments

Yukinori Yamamoto; Michael L. Santella; Xinghua Yu; Sudarsanam Suresh Babu

am-epri 2013; 1016-1024https://doi.org/10.31399/asm.cp.am-epri-2013p1016

View Articletitled, Effect of Non-Standard Heat Treatments on Creep Performance of Creep-Strength Enhanced Ferritic (CSEF) Steel Weldments

Practical Guide to Welding Inconel Alloy 740H

Ronald D. Gollihue; Brian A. Baker; Joseph E. Dierksheide; Jim M. Tanzosh

am-epri 2013; 1025-1037https://doi.org/10.31399/asm.cp.am-epri-2013p1025

View Articletitled, Practical Guide to Welding Inconel Alloy 740H

Modeling a Stress Relaxation Cracking Test for Advanced Ultra Supercritical Alloys

David C. Tung; John C. Lippold

am-epri 2013; 1038-1046https://doi.org/10.31399/asm.cp.am-epri-2013p1038

View Articletitled, Modeling a Stress Relaxation Cracking Test for Advanced Ultra Supercritical Alloys

Development of Welding and Fabrication Technologies in Advanced USC Boiler

Keiji Kubushirio; Takaaki Matsuoka; Yoshitomo Ohkuma; Hirokatsu Nakagawa; Hiroshi Aoki

am-epri 2013; 1047-1058https://doi.org/10.31399/asm.cp.am-epri-2013p1047

View Articletitled, Development of Welding and Fabrication Technologies in Advanced USC Boiler

New Alloy Concepts

Characterization of an Extruded Austenitic Stainless Steel for Advanced Fossil Power Plant Applications

D. Purdy; D. Gandy; J. Shingledecker

am-epri 2013; 1059-1070https://doi.org/10.31399/asm.cp.am-epri-2013p1059

View Articletitled, Characterization of an Extruded Austenitic Stainless Steel for Advanced Fossil Power Plant Applications

Precipitation Strengthening by the Nitrides in High Cr Containing Ferritic Creep Resistant Steels

Ippei Shinozaki; Yasushi Hasegawa

am-epri 2013; 1071-1080https://doi.org/10.31399/asm.cp.am-epri-2013p1071

View Articletitled, Precipitation Strengthening by the Nitrides in High Cr Containing Ferritic Creep Resistant Steels

Development of High Chromium Ferritic Steels Strengthened by Intermetallic Phases

B. Kuhn; M. Talik; J. Zurek; T. Beck; W.J. Quadakkers; L.S. Singheiser; H. Hattendorf

am-epri 2013; 1081-1092https://doi.org/10.31399/asm.cp.am-epri-2013p1081

View Articletitled, Development of High Chromium Ferritic Steels Strengthened by Intermetallic Phases

Long-Term Evolution of Microstructure in VM12-SHC

André Schneider; Marko Subanović; Javier Pirán Abellón

am-epri 2013; 1093-1103https://doi.org/10.31399/asm.cp.am-epri-2013p1093

View Articletitled, Long-Term Evolution of Microstructure in VM12-SHC

Precipitation Process of Z-Phase in 9-12%Cr Steels

Hilmar Kjartansson Danielsen

am-epri 2013; 1104-1115https://doi.org/10.31399/asm.cp.am-epri-2013p1104

View Articletitled, Precipitation Process of Z-Phase in 9-12%Cr Steels

Effect of Copper Addition on the Toughness of New Z-Phase Strengthened 12% Chromium Steels

Fang Liu; Hans-Olof Andrén

am-epri 2013; 1116-1126https://doi.org/10.31399/asm.cp.am-epri-2013p1116

View Articletitled, Effect of Copper Addition on the Toughness of New Z-Phase Strengthened 12% Chromium Steels

Alloy Design of Tempered Martensitic 9Cr-Boron Steel for A-USC Boilers

F. Abe; M. Tabuchi; S. Tsukamoto; Y. Liu

am-epri 2013; 1127-1138https://doi.org/10.31399/asm.cp.am-epri-2013p1127

View Articletitled, Alloy Design of Tempered Martensitic 9Cr-Boron Steel for A-USC Boilers

Creep and General Topics

Role of Half Yield on Creep Life Prediction of Creep Strength Enhanced Ferritic Steels

Kazuhiro Kimura

am-epri 2013; 1139-1150https://doi.org/10.31399/asm.cp.am-epri-2013p1139

View Articletitled, Role of Half Yield on Creep Life Prediction of Creep Strength Enhanced Ferritic Steels

Applications of a Phase Analysis Technology to Advanced Heat Resistant Steels and Nickel-Base Superalloys

Peng Zhifang; Peng Fangfang; Chen Fangyu

am-epri 2013; 1151-1162https://doi.org/10.31399/asm.cp.am-epri-2013p1151

View Articletitled, Applications of a Phase Analysis Technology to Advanced Heat Resistant Steels and Nickel-Base Superalloys

Modelling and Optimizing Precipitation in Creep Resistant Austenitic Steel 25Cr-20Ni-Nb-N

Vujic Stojan; Beal Coline; Sommitsch Christof; Muhammad Farooq; Sandström Rolf; Zurek Joanna

am-epri 2013; 1163-1172https://doi.org/10.31399/asm.cp.am-epri-2013p1163

View Articletitled, Modelling and Optimizing Precipitation in Creep Resistant Austenitic Steel 25Cr-20Ni-Nb-N

The Practical Application of Small Scale Sampling and Impression Creep Testing to Grade 91 Components

S.J. Brett

am-epri 2013; 1173-1181https://doi.org/10.31399/asm.cp.am-epri-2013p1173

View Articletitled, The Practical Application of Small Scale Sampling and Impression Creep Testing to Grade 91 Components

Development of Boiler Risk Management and Life Prediction System

Li Yaojun; Wang Dapeng; Li Shuxue

am-epri 2013; 1182-1189https://doi.org/10.31399/asm.cp.am-epri-2013p1182

View Articletitled, Development of Boiler Risk Management and Life Prediction System

Harmonizing of Creep-Fatigue Test Methods through Development of ASTM Standards

Ashok Saxena; Valliappa Kalyanasundaram; Santosh B. Narasimhachary; Stuart R. Holdsworth

am-epri 2013; 1190-1205https://doi.org/10.31399/asm.cp.am-epri-2013p1190

View Articletitled, Harmonizing of Creep-Fatigue Test Methods through Development of ASTM Standards

Defect Tolerant Design Concepts Applied to Remaining Life Assessments of Steam Turbines and Weld Repairs of Power Generation Equipment

Phillip Dowson; David Dowson

am-epri 2013; 1206-1219https://doi.org/10.31399/asm.cp.am-epri-2013p1206

View Articletitled, Defect Tolerant Design Concepts Applied to Remaining Life Assessments of Steam Turbines and Weld Repairs of Power Generation Equipment

Microstructure and Properties of 12Cr2MoWVTiB Steel for Membrane Walls

Krzysztof Cieszyński; Władysław Osuch; Maciej Kaczorowski; Stanisław Fudali; Aleksandra Czyrska-Filemonowicz

am-epri 2013; 1220-1231https://doi.org/10.31399/asm.cp.am-epri-2013p1220

View Articletitled, Microstructure and Properties of 12Cr2MoWVTiB Steel for Membrane Walls

Application of New GMAW Welding Methods Used in Prefabrication of P92 (X10CrWMoVNb9-2) Pipe Butt Welds

Michael Urzynicok; Krzysztof Kwieciński; Jacek Słania; Paola Mariani; Marian Szubryt

am-epri 2013; 1232-1243https://doi.org/10.31399/asm.cp.am-epri-2013p1232

View Articletitled, Application of New GMAW Welding Methods Used in Prefabrication of P92 (X10CrWMoVNb9-2) Pipe Butt Welds

An Extended Small Punch Test Method for Providing Measured Displacements Across a Test Specimen

L.E. Crocker; A.T. Fry; J. Banks

am-epri 2013; 1244-1255https://doi.org/10.31399/asm.cp.am-epri-2013p1244

View Articletitled, An Extended Small Punch Test Method for Providing Measured Displacements Across a Test Specimen

Non-Destructive and Optical Thickness Measurements of Steam Grown Oxide on Contacting Surfaces of Power Plant

E.M. Piedra; M.J. Lodeiro; A.T. Fry

am-epri 2013; 1256-1267https://doi.org/10.31399/asm.cp.am-epri-2013p1256

View Articletitled, Non-Destructive and Optical Thickness Measurements of Steam Grown Oxide on Contacting Surfaces of Power Plant

Extending Superalloy 718 Temperature Range Limits for Ultra-Supercritical Power Plant Applications

A. Di Gianfrancesco; P. Lombardi; D. Venditti; R. Montani; L. Foroni

am-epri 2013; 1268-1282https://doi.org/10.31399/asm.cp.am-epri-2013p1268

View Articletitled, Extending Superalloy 718 Temperature Range Limits for Ultra-Supercritical Power Plant Applications

Trial Production and Evaluation of 10-Ton Class A-USC Turbine Rotor of Ni-Fe Base Superalloy FENIX-700

Koichi Takasawa; Tatsuya Takahashi; Ryoji Tanaka; Terutaka Kure; Shin-ya Imano; Eiji Saito

am-epri 2013; 1283-1291https://doi.org/10.31399/asm.cp.am-epri-2013p1283

View Articletitled, Trial Production and Evaluation of 10-Ton Class A-USC Turbine Rotor of Ni-Fe Base Superalloy FENIX-700

The New Metallurgical Precipitation Strengthening Model of W Containing Advanced High Cr Ferritic Creep Resistant Steels

Yasushi Hasegawa; Tomohiro Nishiura; Tetsuya Sato

am-epri 2013; 1292-1303https://doi.org/10.31399/asm.cp.am-epri-2013p1292

View Articletitled, The New Metallurgical Precipitation Strengthening Model of W Containing Advanced High Cr Ferritic Creep Resistant Steels

Evaluation of Reduction in Creep Strength Based on Fracture Energy in CSEF Steels

Y. Nagae; T. Asayama

am-epri 2013; 1304-1312https://doi.org/10.31399/asm.cp.am-epri-2013p1304

View Articletitled, Evaluation of Reduction in Creep Strength Based on Fracture Energy in CSEF Steels

The Cross-Weld Performance of 9%Cr Creep-Resistant Steels, and the Influence of Welding Parameters

John Rothwell; Peter Mayr

am-epri 2013; 1313-1328https://doi.org/10.31399/asm.cp.am-epri-2013p1313

View Articletitled, The Cross-Weld Performance of 9%Cr Creep-Resistant Steels, and the Influence of Welding Parameters

A New Developed 9%Cr Steel with High Boron Content Achieving the Long-Term Microstructural Stability and the Optimized Mechanical Properties for 625°C USC Power Plant Boiler

Mitsuharu Yonemura; Yasushi Hasegawa; Masaaki Igarashi; Masaaki Tabuchi; Fujio Abe

am-epri 2013; 1329-1340https://doi.org/10.31399/asm.cp.am-epri-2013p1329

View Articletitled, A New Developed 9%Cr Steel with High Boron Content Achieving the Long-Term Microstructural Stability and the Optimized Mechanical Properties for 625°C USC Power Plant Boiler

Development and Evaluation of Fe/Ni Dissimilar-Weld Turbine Rotor for Advanced USC

Shun Oinuma; Shigekazu Miyashita; Yoshihiro Fujita; Yomei Yoshioka; Takahiro Kubo

am-epri 2013; 1341-1351https://doi.org/10.31399/asm.cp.am-epri-2013p1341

View Articletitled, Development and Evaluation of Fe/Ni Dissimilar-Weld Turbine Rotor for Advanced USC

Creep of the Novel Austenitic Heat Resistant Steel of Fe-20Cr-30Ni-2Nb under Steam Atmosphere at 1073 K

Yu Misosaku; Imanuel Tarigan; Naoki Takata; Mitsutoshi Ueda; Toshio Maruyama; Masao Takeyama

am-epri 2013; 1352-1362https://doi.org/10.31399/asm.cp.am-epri-2013p1352

View Articletitled, Creep of the Novel Austenitic Heat Resistant Steel of Fe-20Cr-30Ni-2Nb under Steam Atmosphere at 1073 K

Evaluation of Long Term Creep Strength of 9Cr Heat Resistant Ferritic Steel Containing Boron with the Aid of System Free Energy Concept

Yoshiki Shioda; Shohei Fujii; Yoshinori Murata; Yasushi Hasegawa

am-epri 2013; 1363-1371https://doi.org/10.31399/asm.cp.am-epri-2013p1363

View Articletitled, Evaluation of Long Term Creep Strength of 9Cr Heat Resistant Ferritic Steel Containing Boron with the Aid of System Free Energy Concept

Creep Crack Growth in T23 Weldments

J.A. Siefert; J.R. Foulds

am-epri 2013; 1372-1387https://doi.org/10.31399/asm.cp.am-epri-2013p1372

View Articletitled, Creep Crack Growth in T23 Weldments

Corrosion Characteristics of Alloy622 Weld Overlay for Waterwall Tubes in Coal Fired Boilers

Masakazu Matsui; Hirotoshi Matsumoto; Takeshi Miyazawa

am-epri 2013; 1388-1396https://doi.org/10.31399/asm.cp.am-epri-2013p1388

View Articletitled, Corrosion Characteristics of Alloy622 Weld Overlay for Waterwall Tubes in Coal Fired Boilers

Detection of Incipient Stress Corrosion Cracking Damage in Primary Loop Piping Using Fiber Optic Strain Gages

Benjamin K. Jackson; David Bosko; Michael T. Cronin; Jonnathan L.W. Warwick; James J. Wall

am-epri 2013; 1397-1406https://doi.org/10.31399/asm.cp.am-epri-2013p1397

View Articletitled, Detection of Incipient Stress Corrosion Cracking Damage in Primary Loop Piping Using Fiber Optic Strain Gages

Creep Rupture Properties of Ni-Base Superalloy USC141 as Solution Treated for 700°C Class A-USC Boiler

Toshihiro Uehara; Chuya Aoki; Takehiro Ohno; Patrik Schraven; Hironori Kamoshida; Shinya Imano

am-epri 2013; 1407-1416https://doi.org/10.31399/asm.cp.am-epri-2013p1407

View Articletitled, Creep Rupture Properties of Ni-Base Superalloy USC141 as Solution Treated for 700°C Class A-USC Boiler

High Temperature Oxidation Behavior of Fe-9Cr Steel In CO₂-O₂ Gas Mixture

Shigenari Hayashi; Kietaro Kaya; Shigeharu Ukai

am-epri 2013; 1417-1421https://doi.org/10.31399/asm.cp.am-epri-2013p1417

View Articletitled, High Temperature Oxidation Behavior of Fe-9Cr Steel In CO<sub>2</sub>-O<sub>2</sub> Gas Mixture

Hot Corrosion Properties of Ni-Based Alloys Used in an Advanced-USC Boiler

Yasuhiro Tanaka; Nobuyoshi Komai; Yasuhiro Takei

am-epri 2013; 1422-1431https://doi.org/10.31399/asm.cp.am-epri-2013p1422

View Articletitled, Hot Corrosion Properties of Ni-Based Alloys Used in an Advanced-USC Boiler

In-Situ Full Field Creep Deformation Study of Creep Resistant Materials Welds

Xinghua Yu; Zhili Feng; Yukinori Yamamoto

am-epri 2013; 1432-1440https://doi.org/10.31399/asm.cp.am-epri-2013p1432

View Articletitled, In-Situ Full Field Creep Deformation Study of Creep Resistant Materials Welds

A Computational Design Study of Novel Creep Resistant Steels for Fossil Fuel Power

Qi Lu; Wei Xu; Sybrand van der Zwaag

am-epri 2013; 1441-1452https://doi.org/10.31399/asm.cp.am-epri-2013p1441

View Articletitled, A Computational Design Study of Novel Creep Resistant Steels for Fossil Fuel Power

Volume Information

Organizing Committee

am-epri 2013; iiihttps://doi.org/10.31399/asm.cp.am-epri-2013fm01

View Articletitled, Organizing Committee

International Advisory Board

am-epri 2013; iv-vhttps://doi.org/10.31399/asm.cp.am-epri-2013fm02

View Articletitled, International Advisory Board

Preface

am-epri 2013; xix-xxhttps://doi.org/10.31399/asm.cp.am-epri-2013fm03

View Articletitled, Preface