Volumes | Advances in Materials for Power Plants | ASM International

Skip to Main Content

Skip Nav Destination

Advances in Materials Technology for Fossil Power Plants: Proceedings from the Sixth International Conference

Plenary Session

The European Perspective on Technology Development for Advanced USC Steam Power Plants

Rudolph Blum; Jørgen Bugge

am-epri 2010; 1-10https://doi.org/10.31399/asm.cp.am-epri-2010p0001

View Articletitled, The European Perspective on Technology Development for Advanced USC Steam Power Plants

R&D Program for A-USC Material Development with Creep Strength/Degradation Assessment Studies

Fujimitsu Masuyama

am-epri 2010; 11-29https://doi.org/10.31399/asm.cp.am-epri-2010p0011

View Articletitled, R&D Program for A-USC Material Development with Creep Strength/Degradation Assessment Studies

Results from Structural Stability Studies of Advanced Heat-Resistant Steels and Alloys for Fossil Power Plants in China

Xishan Xie; Chengyu Chi; Hongyao Yu; Qiuying Yu; Jianxin Dong; Mengzhe Chen; Shuangqun Zhao

am-epri 2010; 30-52https://doi.org/10.31399/asm.cp.am-epri-2010p0030

View Articletitled, Results from Structural Stability Studies of Advanced Heat-Resistant Steels and Alloys for Fossil Power Plants in China

Economic Analysis of Advanced Ultra-Supercritical Pulverized Coal Power Plants: A Cost-Effective CO₂ Emission Reduction Option?

Jeffrey N. Phillips; John M. Wheeldon

am-epri 2010; 53-64https://doi.org/10.31399/asm.cp.am-epri-2010p0053

View Articletitled, Economic Analysis of Advanced Ultra-Supercritical Pulverized Coal Power Plants: A Cost-Effective CO<sub>2</sub> Emission Reduction Option?

Fossil Materials Research at EPRI

D. Gandy; J. Shingledecker

am-epri 2010; 65-71https://doi.org/10.31399/asm.cp.am-epri-2010p0065

View Articletitled, Fossil Materials Research at EPRI

Boiler Materials

Advances in Materials Technology for A-USC Power Plant Boilers

Masaaki Igarashi; Hiroyuki Semba; Mitsuharu Yonemura; Tomoaki Hamaguchi; Hirokazu Okada; Mitsuru Yoshizawa; Atsuro Iseda

am-epri 2010; 72-85https://doi.org/10.31399/asm.cp.am-epri-2010p0072

View Articletitled, Advances in Materials Technology for A-USC Power Plant Boilers

GKM Test Rig: Investigation of the Long Term Operation Behavior of Tubes and Forgings Made of Alloys for Future High Efficient Power Plants

K. Metzger; K. H. Czychon; K. Maile; A. Klenk; A. Helmrich; Q. Chen

am-epri 2010; 86-95https://doi.org/10.31399/asm.cp.am-epri-2010p0086

View Articletitled, GKM Test Rig: Investigation of the Long Term Operation Behavior of Tubes and Forgings Made of Alloys for Future High Efficient Power Plants

Optimization of Inconel Alloy 740 for Advanced Ultra Supercritical Boilers

B. A. Baker

am-epri 2010; 96-109https://doi.org/10.31399/asm.cp.am-epri-2010p0096

View Articletitled, Optimization of Inconel Alloy 740 for Advanced Ultra Supercritical Boilers

Microstructural Evolution in Nimonic 263 for High-Temperature Power Plants

S.A. Smith; G.D. West; K. Chi; W. Gamble; R.C. Thomson

am-epri 2010; 110-126https://doi.org/10.31399/asm.cp.am-epri-2010p0110

View Articletitled, Microstructural Evolution in Nimonic 263 for High-Temperature Power Plants

Long Term Properties and Microstructural Evolution of ASTM Grade 23

S. Caminada; G. Cumino; L. Cipolla; S. Tiberi Vipraio; A. Di Gianfrancesco

am-epri 2010; 127-139https://doi.org/10.31399/asm.cp.am-epri-2010p0127

View Articletitled, Long Term Properties and Microstructural Evolution of ASTM Grade 23

Evaluation of 18Cr-9Ni-3Cu-Nb-N Austenitic Stainless Tubes for Ultra-Supercritical Power Boiler

Zheng Kaiyun; Wang Yanfeng; Cui Zhengqiang

am-epri 2010; 140-152https://doi.org/10.31399/asm.cp.am-epri-2010p0140

View Articletitled, Evaluation of 18Cr-9Ni-3Cu-Nb-N Austenitic Stainless Tubes for Ultra-Supercritical Power Boiler

Long-Term Creep Properties of 2.25Cr-1.6W-VNbB Steel (T23/P23) for Fossil Fired and Heat Recovery Boilers

H. Okada; M. Igarashi; M. Yoshizawa; S. Matsumoto; T. Nakashima; A. Iseda

am-epri 2010; 153-163https://doi.org/10.31399/asm.cp.am-epri-2010p0153

View Articletitled, Long-Term Creep Properties of 2.25Cr-1.6W-VNbB Steel (T23/P23) for Fossil Fired and Heat Recovery Boilers

Effect of Pre-Strain on Creep Properties of Alloy 740

Keiji Kubushiro; Kyohei Nomura; Satoshi Takahashi; Madoka Takahashi; Hirokatsu Nakagawa

am-epri 2010; 164-170https://doi.org/10.31399/asm.cp.am-epri-2010p0164

View Articletitled, Effect of Pre-Strain on Creep Properties of Alloy 740

Oxidation and Corrosion

The Effect of Heat Flux on the Steam Oxidation Kinetics and Scale Morphology of Low Alloy Materials

A. T. Fry; L. J. Brown; J. P. Banks

am-epri 2010; 171-184https://doi.org/10.31399/asm.cp.am-epri-2010p0171

View Articletitled, The Effect of Heat Flux on the Steam Oxidation Kinetics and Scale Morphology of Low Alloy Materials

Effect of Grain Size on Steam Oxidation for Shot-Peened Stainless Steels

Y. Nishiyama; A. Iseda; M. Yoshizawa; S. Matsumoto; M. Igarashi

am-epri 2010; 185-197https://doi.org/10.31399/asm.cp.am-epri-2010p0185

View Articletitled, Effect of Grain Size on Steam Oxidation for Shot-Peened Stainless Steels

Characterization of Steam-Formed Oxides on Candidate Materials for USC Boilers

J. M. Sarver; J. M. Tanzosh

am-epri 2010; 198-212https://doi.org/10.31399/asm.cp.am-epri-2010p0198

View Articletitled, Characterization of Steam-Formed Oxides on Candidate Materials for USC Boilers

Steam-Side Oxide Scale Exfoliation Behavior in Superheaters and Reheaters: Differences in the Behavior of Alloys T22, T91 and TP347 Based on Computer Simulation Results

Adrian S. Sabau; John P. Shingledecker; Ian G. Wright

am-epri 2010; 213-242https://doi.org/10.31399/asm.cp.am-epri-2010p0213

View Articletitled, Steam-Side Oxide Scale Exfoliation Behavior in Superheaters and Reheaters: Differences in the Behavior of Alloys T22, T91 and TP347 Based on Computer Simulation Results

Characterization of Reaction Products from Field Exposed Tubes

K. A. Unocic; B. A. Pint; I. G. Wright

am-epri 2010; 243-253https://doi.org/10.31399/asm.cp.am-epri-2010p0243

View Articletitled, Characterization of Reaction Products from Field Exposed Tubes

Modeling Fireside Corrosion of Heat Exchanger Materials in Advanced Energy Systems

T. Lant; C. Keefe; C. Davies; B. McGhee; N. Simms; T Fry

am-epri 2010; 255-267https://doi.org/10.31399/asm.cp.am-epri-2010p0255

View Articletitled, Modeling Fireside Corrosion of Heat Exchanger Materials in Advanced Energy Systems

Online Gas Measurements in a Pilot-Scale Combustion Facility for Fireside Corrosion Study

Steven C. Kung

am-epri 2010; 268-287https://doi.org/10.31399/asm.cp.am-epri-2010p0268

View Articletitled, Online Gas Measurements in a Pilot-Scale Combustion Facility for Fireside Corrosion Study

In Situ Corrosion Testing of Ultrasupercritical Tube and Weld Overlay Materials

E. S. Robitz; J. M. Tanzosh

am-epri 2010; 288-302https://doi.org/10.31399/asm.cp.am-epri-2010p0288

View Articletitled, <em>In Situ</em> Corrosion Testing of Ultrasupercritical Tube and Weld Overlay Materials

Coal Ash Corrosion Properties of Ni-Based Alloy for Advanced-USC Boilers

Yasuhiro Tanaka; Nobuyoshi Komai; Hiroshi Suganuma

am-epri 2010; 303-311https://doi.org/10.31399/asm.cp.am-epri-2010p0303

View Articletitled, Coal Ash Corrosion Properties of Ni-Based Alloy for Advanced-USC Boilers

Materials Performance of Oxyfuel Turbine Alloys

G. R. Holcomb; P. Wang

am-epri 2010; 312-324https://doi.org/10.31399/asm.cp.am-epri-2010p0312

View Articletitled, Materials Performance of Oxyfuel Turbine Alloys

Turbine Materials and Applications

Advanced USC Technology Development in Japan

Masafumi Fukuda; Eiji Saito; Yoshinori Tanaka; Takeo Takahashi; Shinji Nakamura; Jun Iwasaki; Shinichi Takano; Sakae Izumi

am-epri 2010; 325-341https://doi.org/10.31399/asm.cp.am-epri-2010p0325

View Articletitled, Advanced USC Technology Development in Japan

The Role of Boron in the Long-Term Stability of a CrMoCoB (FB2) Steel for a Rotor Component

A. Di Gianfrancesco; L. Cipolla; M. Paura; S. Tiberi Vipraio; D. Venditti; S. Neri; M. Calderini

am-epri 2010; 342-360https://doi.org/10.31399/asm.cp.am-epri-2010p0342

View Articletitled, The Role of Boron in the Long-Term Stability of a CrMoCoB (FB2) Steel for a Rotor Component

Effect of Grain Size on Mechanical Properties of Ni-Fe Base Superalloy for Advanced USC Turbine Rotor Materials

Satoru Ohsaki; Tatsuya Takahashi; Shinya Imano; Jun Sato; Eiji Saito

am-epri 2010; 361-372https://doi.org/10.31399/asm.cp.am-epri-2010p0361

View Articletitled, Effect of Grain Size on Mechanical Properties of Ni-Fe Base Superalloy for Advanced USC Turbine Rotor Materials

Low Thermal Expansion Ni-Base Superalloy for 700 C Class Steam Turbine Plant (USC141)

H. Kamoshida; S. Imano; E. Saito; T. Uehara; T. Toga; T. Nonomura

am-epri 2010; 373-385https://doi.org/10.31399/asm.cp.am-epri-2010p0373

View Articletitled, Low Thermal Expansion Ni-Base Superalloy for 700 C Class Steam Turbine Plant (USC141)

Alloy Design of Ni-Base Superalloys Aiming for Over 750°C Class A-USC Steam Power Plant

Jun Sato; Hironori Kamoshida; Shinya Imano; Toshihiro Omori; Kiyohito Ishida

am-epri 2010; 386-392https://doi.org/10.31399/asm.cp.am-epri-2010p0386

View Articletitled, Alloy Design of Ni-Base Superalloys Aiming for Over 750°C Class A-USC Steam Power Plant

The Manufacture of Large, Complex Fossil Components Using Powder Metallurgy and HIP Technologies—A Feasibility Study

D. Gandy; J. Shingledecker; L. Lherbier

am-epri 2010; 393-407https://doi.org/10.31399/asm.cp.am-epri-2010p0393

View Articletitled, The Manufacture of Large, Complex Fossil Components Using Powder Metallurgy and HIP Technologies—A Feasibility Study

Creep Rupture Strength and Microstructural Investigation of 12 % Cr Steel Large Forgings for Ultra-Supercritical Steam Turbine Rotors

M. Mikami; Y. Wakeshima; T. Miyata

am-epri 2010; 408-422https://doi.org/10.31399/asm.cp.am-epri-2010p0408

View Articletitled, Creep Rupture Strength and Microstructural Investigation of 12 % Cr Steel Large Forgings for Ultra-Supercritical Steam Turbine Rotors

Development Status of Ni-Fe Base Superalloy for 700 °C Class A-USC Steam Turbine Rotor Application

Shinya Imano; Jun Sato; Hironori Kamoshida; Eiji Saito; Koji Kajikawa; Satoru Ohsaki; Tatsuya Takahashi

am-epri 2010; 423-435https://doi.org/10.31399/asm.cp.am-epri-2010p0423

View Articletitled, Development Status of Ni-Fe Base Superalloy for 700 °C Class A-USC Steam Turbine Rotor Application

Advanced Forgings for Highly Efficient Fossil Power Plants

N. Blaes; B. Donth; A. Diwo; D. Bokelmann

am-epri 2010; 436-449https://doi.org/10.31399/asm.cp.am-epri-2010p0436

View Articletitled, Advanced Forgings for Highly Efficient Fossil Power Plants

Corrosion-Fatigue in Steam Turbine Blades

R. N. Salzman; N. F. Rieger; S. Tschegg; B. Schönbauer; A. Turnbull; S. Zhou; D. Gandy

am-epri 2010; 450-469https://doi.org/10.31399/asm.cp.am-epri-2010p0450

View Articletitled, Corrosion-Fatigue in Steam Turbine Blades

High-Temperature Erosion Testing Standard and Round Robin Testing

V.P. Swaminathan; Jeffery S. Smith; Dave Gandy

am-epri 2010; 470-486https://doi.org/10.31399/asm.cp.am-epri-2010p0470

View Articletitled, High-Temperature Erosion Testing Standard and Round Robin Testing

Creep and Life Management

Creep-Fatigue in Steam Turbine Materials

S. R. Holdsworth

am-epri 2010; 487-503https://doi.org/10.31399/asm.cp.am-epri-2010p0487

View Articletitled, Creep-Fatigue in Steam Turbine Materials

Validation of Creep Crack Growth NSW Model in Extrapolating Short-Term Laboratory Test Results to Longer-Term Service Component Failure Prediction

Shervin Maleki; Yan-Hui Zhang; Kamran Nikbin

am-epri 2010; 504-515https://doi.org/10.31399/asm.cp.am-epri-2010p0504

View Articletitled, Validation of Creep Crack Growth NSW Model in Extrapolating Short-Term Laboratory Test Results to Longer-Term Service Component Failure Prediction

Creep Behavior of Advanced Power Plant Steels after Long-Term Isothermal Ageing

V. Sklenicka; K. Kucharova; M. Svoboda; A. Kroupa

am-epri 2010; 516-529https://doi.org/10.31399/asm.cp.am-epri-2010p0516

View Articletitled, Creep Behavior of Advanced Power Plant Steels after Long-Term Isothermal Ageing

Life Assessment of High Temperature Welded Components

P. Carter; D.L. Marriott; J.F. Shingledecker; J.R. Foulds; R.W. Swindemann

am-epri 2010; 530-553https://doi.org/10.31399/asm.cp.am-epri-2010p0530

View Articletitled, Life Assessment of High Temperature Welded Components

Nondestructive Evaluation Methods of Microstructure in Power Plant Steel Grades

S. Meir; S. Liu; B. Mishra; D.L. Olson; A.N. Lasseigne; K. Coleman; R. Hellner

am-epri 2010; 554-570https://doi.org/10.31399/asm.cp.am-epri-2010p0554

View Articletitled, Nondestructive Evaluation Methods of Microstructure in Power Plant Steel Grades

The Effect of Service Aging on the Creep-Fatigue Properties of Alloy 617 Parent Metal and Welds

W.L. Gamble

am-epri 2010; 571-583https://doi.org/10.31399/asm.cp.am-epri-2010p0571

View Articletitled, The Effect of Service Aging on the Creep-Fatigue Properties of Alloy 617 Parent Metal and Welds

Creep and Creep-Fatigue Behavior of Grade 92 Base Metal and Welded Joints

Y. Takahashi; D. Gandy

am-epri 2010; 584-602https://doi.org/10.31399/asm.cp.am-epri-2010p0584

View Articletitled, Creep and Creep-Fatigue Behavior of Grade 92 Base Metal and Welded Joints

New Concepts for Integrity and Lifetime Assessment of Boiler and Turbine Components for Advanced Ultra-Supercritical Fossil Plants

C. Feuillette; K. Schmidt; K. Maile; A. Klenk; E. Roos

am-epri 2010; 603-619https://doi.org/10.31399/asm.cp.am-epri-2010p0603

View Articletitled, New Concepts for Integrity and Lifetime Assessment of Boiler and Turbine Components for Advanced Ultra-Supercritical Fossil Plants

9% Cr Alloys

Creep Deformation Behavior and Alloy Design Philosophy of Creep-Resistant Tempered Martensitic 9Cr Steel

F. Abe

am-epri 2010; 620-639https://doi.org/10.31399/asm.cp.am-epri-2010p0620

View Articletitled, Creep Deformation Behavior and Alloy Design Philosophy of Creep-Resistant Tempered Martensitic 9Cr Steel

Boron Strengthening in Ferritic 9Cr3W3CoVNbBN Steel with Improved Crossweld Creep Performance

Peter Mayr; Ivan Holzer; Mihaela Albu; Gerald Kothleitner; Horst Cerjak; Samuel M. Allen

am-epri 2010; 640-653https://doi.org/10.31399/asm.cp.am-epri-2010p0640

View Articletitled, Boron Strengthening in Ferritic 9Cr3W3CoVNbBN Steel with Improved Crossweld Creep Performance

Microstructural Degradation during High Temperature Exposure Up to 10⁵ h and Its Effects on Creep of Grade 91 Steel

R.P. Chen; H. Ghassemi Armaki; K. Maruyama; Y. Minami; M. Igarashi

am-epri 2010; 654-666https://doi.org/10.31399/asm.cp.am-epri-2010p0654

View Articletitled, Microstructural Degradation during High Temperature Exposure Up to 10<sup>5</sup> h and Its Effects on Creep of Grade 91 Steel

Effects of Variation of Phase Chemistry on Multi-Region Stress Rupture Properties at 625°C for P92 Steel

Z. F. Peng; L.S. Cai; F. F. Peng; Y. P. Hu; F. Y. Chen

am-epri 2010; 667-678https://doi.org/10.31399/asm.cp.am-epri-2010p0667

View Articletitled, Effects of Variation of Phase Chemistry on Multi-Region Stress Rupture Properties at 625°C for P92 Steel

The Effect of Duration of Stress Relief Heat Treatments on Microstructural Evolution and Mechanical Properties in Grade 91 and 92 Power Plant Steels

L. Li; P. Zhu; G. West; R. C. Thomson

am-epri 2010; 679-692https://doi.org/10.31399/asm.cp.am-epri-2010p0679

View Articletitled, The Effect of Duration of Stress Relief Heat Treatments on Microstructural Evolution and Mechanical Properties in Grade 91 and 92 Power Plant Steels

Microstructural Evolution of P92 Steel during Creep

Qinxin Zhao; Ting Li; Xiang Deng; Dingnan Cheng

am-epri 2010; 693-704https://doi.org/10.31399/asm.cp.am-epri-2010p0693

View Articletitled, Microstructural Evolution of P92 Steel during Creep

Creep-Rupture Property Assessment for 9-12% Cr Ferritic Heat-Resistant Steels

Z. F. Peng; Y. Y. Dang; F. F. Peng

am-epri 2010; 705-714https://doi.org/10.31399/asm.cp.am-epri-2010p0705

View Articletitled, Creep-Rupture Property Assessment for 9-12% Cr Ferritic Heat-Resistant Steels

Key Life Management Issues with Grade 91 Steel

Jonathan Parker; Kent Coleman

am-epri 2010; 715-731https://doi.org/10.31399/asm.cp.am-epri-2010p0715

View Articletitled, Key Life Management Issues with Grade 91 Steel

Long-Term Creep Strength Property of Advanced Ferritic Creep Resistant Steels

K. Kimura; K. Sawada; H. Kushima

am-epri 2010; 732-751https://doi.org/10.31399/asm.cp.am-epri-2010p0732

View Articletitled, Long-Term Creep Strength Property of Advanced Ferritic Creep Resistant Steels

Estimates for the Onset of Type IV Cracking in Grade 91 Power Plant Components

S. J. Brett

am-epri 2010; 752-761https://doi.org/10.31399/asm.cp.am-epri-2010p0752

View Articletitled, Estimates for the Onset of Type IV Cracking in Grade 91 Power Plant Components

P(T)91 Steel-A Review of Current Code and Fabrication Practices

Pradip Goswami

am-epri 2010; 762-786https://doi.org/10.31399/asm.cp.am-epri-2010p0762

View Articletitled, P(T)91 Steel-A Review of Current Code and Fabrication Practices

The Effect of Simulated Post Weld Heat Treatment Temperature Overshoot on Microstructural Evolution in P91 and P92 Power Plant Steels

R.C. MacLachlan; J.J. Sanchez-Hanton; R.C. Thomson

am-epri 2010; 787-799https://doi.org/10.31399/asm.cp.am-epri-2010p0787

View Articletitled, The Effect of Simulated Post Weld Heat Treatment Temperature Overshoot on Microstructural Evolution in P91 and P92 Power Plant Steels

Advanced Coating Technologies

Evaluation of Nanocrystalline MCrAl Coatings for Power Plants

N. S. Cheruvu; R. Wei; J. Shingledecker; D.W. Gandy

am-epri 2010; 801-820https://doi.org/10.31399/asm.cp.am-epri-2010p0801

View Articletitled, Evaluation of Nanocrystalline MCrAl Coatings for Power Plants

Abradable Coatings Development and Validation Testing for Application on Steam Turbine Components

Dieter Sporer; Scott Wilson; Petr Fiala; Ruediger Schuelein

am-epri 2010; 821-838https://doi.org/10.31399/asm.cp.am-epri-2010p0821

View Articletitled, Abradable Coatings Development and Validation Testing for Application on Steam Turbine Components

Performance of Al-Rich Oxidation Resistant Coatings for Fe-Base Alloys

B. A. Pint

am-epri 2010; 839-849https://doi.org/10.31399/asm.cp.am-epri-2010p0839

View Articletitled, Performance of Al-Rich Oxidation Resistant Coatings for Fe-Base Alloys

Nano-Structured Erosion Resistant Coatings for Gas and Steam Turbines

V.P. Swaminathan; Ronghua Wei; David W. Gandy

am-epri 2010; 850-871https://doi.org/10.31399/asm.cp.am-epri-2010p0850

View Articletitled, Nano-Structured Erosion Resistant Coatings for Gas and Steam Turbines

Castings

Processing of Advanced Alloys for A-USC Steam Turbine Applications

Paul D. Jablonski; Jeffery A. Hawk; Christopher J. Cowen; Philip J. Maziasz

am-epri 2010; 872-885https://doi.org/10.31399/asm.cp.am-epri-2010p0872

View Articletitled, Processing of Advanced Alloys for A-USC Steam Turbine Applications

High-Temperature Control Valves for the 700°C Fossil Fired Power Plant

B. Föllmer; K. Metzger; K. Maile; C. Hoffmann; M. Rohr

am-epri 2010; 886-899https://doi.org/10.31399/asm.cp.am-epri-2010p0886

View Articletitled, High-Temperature Control Valves for the 700°C Fossil Fired Power Plant

High-Temperature Mechanical Properties and Microstructure of Cast Ni-Based Superalloys for Steam Turbine Casing Applications

P.J. Maziasz; N.D. Evans; P.D. Jablonski

am-epri 2010; 900-915https://doi.org/10.31399/asm.cp.am-epri-2010p0900

View Articletitled, High-Temperature Mechanical Properties and Microstructure of Cast Ni-Based Superalloys for Steam Turbine Casing Applications

Advanced Stainless Steels

Mechanical Properties and Microstructure of a Wrought Austenitic Stainless Steel for Advanced Fossil Power Plant Applications

D. Gandy; J.P Shindledecker; P.J. Maziasz; G. Maurer; J. Magee

am-epri 2010; 916-932https://doi.org/10.31399/asm.cp.am-epri-2010p0916

View Articletitled, Mechanical Properties and Microstructure of a Wrought Austenitic Stainless Steel for Advanced Fossil Power Plant Applications

Strain Induced Hardening of Advanced Austenitic Stainless Steels Evaluation of Creep Properties

P Moody; Doosan Babcock

am-epri 2010; 933-948https://doi.org/10.31399/asm.cp.am-epri-2010p0933

View Articletitled, Strain Induced Hardening of Advanced Austenitic Stainless Steels Evaluation of Creep Properties

Prediction of Microstructural Evolution in Austenitic Stainless Steels for Extended Life Power Plant Applications

F. Zhu; R.G. Faulkner; R. L. Higginson; S. Spindler; A. Baker; C. D. Hamm

am-epri 2010; 949-961https://doi.org/10.31399/asm.cp.am-epri-2010p0949

View Articletitled, Prediction of Microstructural Evolution in Austenitic Stainless Steels for Extended Life Power Plant Applications

Creep Rupture Properties of HR6W for Advanced-USC Boilers

Nobuhiko Saito; Nobuyoshi Komai

am-epri 2010; 962-971https://doi.org/10.31399/asm.cp.am-epri-2010p0962

View Articletitled, Creep Rupture Properties of HR6W for Advanced-USC Boilers

Sigma Phase Precipitation in 347HFG Stainless Steel for Supercritical Power Plant Operation

D. West; J. Hulance; R.L. Higginson; G. Wilcox

am-epri 2010; 972-985https://doi.org/10.31399/asm.cp.am-epri-2010p0972

View Articletitled, Sigma Phase Precipitation in 347HFG Stainless Steel for Supercritical Power Plant Operation

Mechanical Properties and Microstructures of an S304H-Type Steel Subjected to Hot Working

Z. Yanushkevich; A. Mogucheva; M. Tikhonova; A. Belyakov; R. Kaibyshev

am-epri 2010; 986-994https://doi.org/10.31399/asm.cp.am-epri-2010p0986

View Articletitled, Mechanical Properties and Microstructures of an S304H-Type Steel Subjected to Hot Working

Welding and Weld Performance

Weldability of EPRI P87

J. A. Siefert; J. M. Tanzosh; J.P. Shingledecker

am-epri 2010; 995-1013https://doi.org/10.31399/asm.cp.am-epri-2010p0995

View Articletitled, Weldability of EPRI P87

Toughness Evaluation of Welds in 9Cr-1Mo-V and 9Cr-0.5Mo-V Steels Made Using the Flux-Cored Arc Welding (FCAW) Process

C.E. Jaske; Z. Berg; T. Andress

am-epri 2010; 1014-1029https://doi.org/10.31399/asm.cp.am-epri-2010p1014

View Articletitled, Toughness Evaluation of Welds in 9Cr-1Mo-V and 9Cr-0.5Mo-V Steels Made Using the Flux-Cored Arc Welding (FCAW) Process

Flux Cored Wires for High Integrity Applications

William F. Newell, Jr.

am-epri 2010; 1030-1044https://doi.org/10.31399/asm.cp.am-epri-2010p1030

View Articletitled, Flux Cored Wires for High Integrity Applications

Weldability of Inconel Alloy 740

J. A. Siefert; J. M. Tanzosh; J. E. Ramirez

am-epri 2010; 1045-1066https://doi.org/10.31399/asm.cp.am-epri-2010p1045

View Articletitled, Weldability of Inconel Alloy 740

Long-Term Creep Rupture Strength of Weldment of Candidate Ni and Fe-Ni Based Materials for Tube and Pipe of A-USC Boilers

G. Bao; T. Sato; Y. Marumoto

am-epri 2010; 1067-1076https://doi.org/10.31399/asm.cp.am-epri-2010p1067

View Articletitled, Long-Term Creep Rupture Strength of Weldment of Candidate Ni and Fe-Ni Based Materials for Tube and Pipe of A-USC Boilers

Volume Information

Organizing Committee

am-epri 2010; iiihttps://doi.org/10.31399/asm.cp.am-epri-2010fm01

View Articletitled, Organizing Committee

International Advisory Board

am-epri 2010; iv-vhttps://doi.org/10.31399/asm.cp.am-epri-2010fm02

View Articletitled, International Advisory Board

Preface

am-epri 2010; xv-xvihttps://doi.org/10.31399/asm.cp.am-epri-2010fm03

View Articletitled, Preface