Cabot ESR HY 140 is a 5Ni-Cr-Mo-V alloy steel produced by electric-furnace melting, vacuum degassing and electroslag remelting (ESR) by use of small-heat-size technology. Electroslag refining improves cleanliness and lowers the sulfur content to provide improved isotropy, ductility and toughness. This steel is capable of developing a minimum yield strength of 140,000 psi with an optimum combination of hardenability, temperability, weldability, formability, toughness and fatigue properties. It meets many special requirements for petrochemical applications. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-358. Producer or source: Cabot Corporation, Machinery Division.

INGERSOLL-RAND ESR HY 140 is a 5Ni-Cr-Mo-V alloy steel produced by electric-furnace melting, vacuum degassing and electroslag remelting (ESR) by use of small-heat-size technology. Electroslag refining improves cleanliness and lowers the sulfur content to provide improved isotropy, ductility and toughness. This steel is capable of developing a minimum yield strength of 140,000 psi with an optimum combination of hardenability, temperability, weldability, formability, toughness and fatigue properties. It meets many special requirements for petrochemical applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-393. Producer or source: Ingersoll-Rand Oilfield Products Company.

BETHLEHEM RQ 100L is a low-carbon, low-sulfur, 100 ksi minimum yield strength quenched-and-tempered plate steel offering improved toughness and weldability over other quenched-and-tempered plate grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on forming, heat treating, and joining. Filing Code: CS-125. Producer or source: Bethlehem Steel Corporation.

Phynox is a high yield strength cobalt alloy with a range of physical, chemical, and technological properties that make it useful for a wide variety of applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CO-115. Producer or source: Metalimphy Precision Alloys Inc.

Durimphy is a maraging steel with 1724 MPa (250 ksi) tensile strength and a very high yield strength due to precipitation hardening. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-140. Producer or source: Metalimphy Precision Alloys.

Phytime is a maraging steel with a 2068 MPa (300 ksi) strength and a very high yield strength due to precipitation hardening. The major improvement over Durimphy (see Alloy Digest Fe-140, February 2007) is cleanliness and improved fatigue performance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-141. Producer or source: Metalimphy Precision Alloys.

Superelso 890 (minimum yield strength of 890 MPa, or 130 ksi) is a high yield strength quenched and tempered steel alloy. This datasheet provides information on composition, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-640. Producer or source: Industeel USA, LLC.

Superelso 960 (minimum yield strength of 960 MPa, or 140 ksi) is a high yield strength quenched-and-tempered steel alloy. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-644. Producer or source: Industeel USA, LLC.

SuperElso 1100 is a high yield strength quenched and tempered steel alloy. For welded and weight-saving structures. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-654. Producer or source: Industeel USA, LLC.

Supralsim 690 QL1 is a high yield-strength quenched and tempered steel for welded and weight-saving structures. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-678. Producer or source: Industeel USA, LLC.

HY-130 and HY-140(T) comprise one steel composition capable of developing minimum yield strengths of 130,000 and 140,000 psi with an optimum combination of toughness, hardenability, temperability, weldability, formability and fatigue properties in thicknesses through 4 inches. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-280. Producer or source: United States Steel Corporation.

RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

55-06 and 70-02 Ductile Dura-Bar are continuously cast ductile irons with about 50 and 75% pearlitic microstructures, respectively. 55-06 has about the same tensile strength as SAE 1045 as-hot-rolled steel. Its maximum yield strength and elongation are equivalent to a eutectoid carbon steel. 70-02 Ductile Dura-Bar has somewhat greater tensile strength up to 3 diameter and considerably higher yield strength up through 10 diameter. The elongation of 70-02 is lower than that of 55-06 because of its reduced ferrite content. This datasheet provides information on composition, microstructure, and hardness. It also includes information on heat treating. Filing Code: CI-62. Producer or source: Federal Bronze Products Inc..

SPARTAN III (HSLA-100) is one of the family of Spartan high strength (>690 MPa, or >100 ksi, minimum yield strength), high toughness, improved weldability steels, which are alternatives to traditional quenched and tempered alloy steels. The Spartan family of steels are low carbon, copper precipitation hardened steels. Spartan III has greater yield strength compared to Spartan I and Spartan II. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming and joining. Filing Code: SA-743. Producer or source: ArcelorMittal USA.

RMI 5A1-2.5Sn ELI (ELI = Extra Low Interstitials) is an alpha titanium alloy that was developed for use at cryogenic temperatures. It has a guaranteed minimum yield strength of 100,000 psi at room temperature with good ductility and formability; its yield strength and elongation increase substantially as temperature is lowered. It is used successfully for high-pressure vessels at temperatures below -320 F. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-75. Producer or source: RMI Company.

USS T-1 Type-A is a high yield strength constructional alloy steel recommended where high levels of yield strength and toughness are required. It is furnished in the quenched and tempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-157. Producer or source: United States Steel Corporation.

SPARTAN II (HSLA-100) is one of the family of Spartan high strength (>690 MPa, or >100 ksi, minimum yield strength), high toughness, improved weldability steels, which are alternatives to traditional quenched and tempered alloy steels. The Spartan family of steels are low carbon, copper precipitation hardened steels. Spartan II has improved yield strength compared to Spartan I. This datasheet provides information on composition, physical properties, microstructure, tensile properties. It also includes information on forming and joining. Filing Code: SA-738. Producer or source: ArcelorMittal USA.

Armstrong Ultra 690 is a high yield strength steel for welded and weight saving in structures. It has a minimum yield strength of 690 MPa (100 ksi) in thicknesses up to 50 mm (2 in.). This datasheet provides information on composition and tensile properties. It also includes information on forming, machining, and joining. Filing Code: SA-858. Producer or source: Industeel France.

RMI 5A1-5Sn-2Zr-2Mo-Si is an alpha-type titanium alloy recommended for high-temperature applications in the 800-1000 F range. In the mill annealed condition it has a typical room-temperature yield strength of 126,000 psi and a typical yield strength (in short-time elevated-temperature tensile test) of 80,000 psi at 1000 F. Its uses include elevated-temperature service and jet-engine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-78. Producer or source: RMI Company.

REPUBLIC HP 9-4-20 is designed especially for applications requiring optimum combinations of relatively high yield strength and toughness with good weldability. This alloy is capable of providing 180,000 psi yield strength in combination with a Charpy V-notch value of 50 ft-lb at 75 F in plate thicknesses up to at least 4 inches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-270. Producer or source: Republic Steel Corporation.