Search Results for wrought nickel alloys

Carpenter Nickel 205 alloy exhibits an excellent combination of mechanical, electrical and corrosion resistant properties. It is resistant to oxidation. It is ferromagnetic below 680 F (360 C). The alloy is produced to closely controlled composition including small additions of magnesium and titanium. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: Ni-383. Producer or source: Carpenter.

AL 200 and AL 201 alloys are wrought commercially pure nickel. They differ, as to composition, in maximum specified carbon levels (0.15 for AL 200 and 0.02 for AL 201). Strengths of both alloys in the annealed condition are similar to that of mild steel. The lower carbon AL 201 alloy has higher temperature servicability than AL 200 alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-364. Producer or source: Allegheny Ludlum Corporation.

COPPER ALLOY No. C72500 is a tin-bearing cupronickel. It has excellent hot and cold working characteristics. It is highly resitant to seawater corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-549. Producer or source: Copper and copper alloy mills.

Inconel alloy MA 754 is an oxide-dispersion-strengthened nickel-chromium alloy produced by mechanical alloying. It offers the advantages of a wrought high-temperature material in service environments where only cast alloys could be used in the past. Its strength in conjunction with its high melting point and microstructural stability makes it an attractive alloy for extreme service applications. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: Ni-244. Producer or source: Inco Alloys International Inc.. Originally published May 1977, revised March 1990.

Copper Alloy No. C72700 is a copper/nickel/tin alloy which is responsive to spinodal decomposition hardening. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: Cu-566. Producer or source: Copper and copper alloy mills.

INCONEL X is a high-strength, high-temperature nickel-base alloy responding to age hardening for maximum properties. It is highly resistant to chemical corrosion and oxidation. Its creep rate is low under high stresses at 1200-1500 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-3. Producer or source: International Nickel Company Inc..

Copper alloy No. C76390 is a wrought (rod) leaded nickel silver with nominally 24.5% nickel and 1% lead. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-553. Producer or source: Copper and copper alloy mills.

8620, 8620H, 8620RH, 20NiCrMo2-2, 20NiCrMoS2-2, SNCM220, and SNCM220H are wrought, low-carbon, nickel-chromium-molybdenum, low alloy steels that are typically used in the carburized or carbonitrided, and subsequently quench hardened, and tempered condition. In general, these steels are intended for the manufacture of small- and medium-sized case-hardened parts that require a high hardness, high carbon, martensitic case with good wear and fatigue resistance, and a strong and tough low-carbon steel core. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: SA-879. Producer or source: Heat Treater’s Guide Data Sheet.

NIMONIC Alloy 81 is a wrought nickel alloy designed to provide enhanced resistance to high-temperature corrosion coupled with good high-temperature strength. It is particularly resistant to attack by deposits of alkali metal sulfates and chlorides resulting from combustion of impure fuels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-345. Producer or source: Inco Alloys International Inc..

NIMAG 105 is a wrought nickel alloy with a high magnetostriction coefficient. It is easily formed or drawn, has a high Curie temperature and has low oxidation at high temperatures. It is recommended for electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-228. Producer or source: Spang Industries Inc..

TECHALLOY Nickel 205 is a wrought nickel-base alloy containing small additions of magnesium and titanium. It has a high Curie temperature and a high magnetostriction coefficient. It is used for many electrical and electronic components and for equipment employing magnetostrictive effects. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-247. Producer or source: Techalloy Company Inc..

Carlson Alloys C200 and C201 are wrought forms of nickel with carbon the only difference in composition. The metal has excellent resistance to dry chlorine and hydrogen chloride and caustic alkalis. The alloys combine good mechanical properties with excellent resistance to corrosive environments. Thermal and electrical conductivities are considerably higher than stainless steels or nickel alloys they possess. Excellent ductility at sub-zero temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-456. Producer or source: G.O. Carlson Inc.

Land-based turbines need to operate at high temperatures if they are to generate electricity efficiently and with fewer greenhouse gas emissions. Toward this end, alloy producers are developing nickel-base superalloys that will withstand the demanding operating conditions inside these units. The advanced, wrought, gamma-prime strengthened superalloy Haynes 282 could also potentially be used in aircraft manufacturing and other highperformance, high-temperature environments. The alloy contains 58% Ni, 19% Cr, 10% Co, 8.5% Mo, 1.5% Al, and 2.1% Ti. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Ni-637. Producer or source: Haynes International Inc.

AL-22 is a wrought 22Cr-13.5Mo-3W-4Fe high-nickel alloy with outstanding and versatile corrosion resistance. The alloy is available in plate and is used where excellent corrosion, pitting, or crevice corrosion resistance is needed. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-559. Producer or source: Allegheny Ludlum Corporation.

Carlson alloy C825 is a wrought nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. It was developed to handle both reducing and oxidizing media. The alloy is resistant to chloride-ion stress-corrosion cracking, to pitting and crevice attack and many corrosive solutions. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-419. Producer or source: G.O. Carlson Inc..

TECHALLOY Nickel 200 is commercially pure wrought nickel. It maintains good strength at elevated temperatures and is tough and ductile at low temperatures. It is a general-purpose material when the properties of nickel alloys are not needed. Its many uses include spun and cold-formed parts, electrical components, transducers and nickel-cadmium batteries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-246. Producer or source: Techalloy Company Inc..

Nickel-Copper Alloys 410 and 411 are strong and ductile casting alloys; they are generally used in conjunction with wrought counterparts. They can be cast readily into fittings such as elbows, tees, return bends, flanges and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-214. Producer or source: Nickel alloy casting producers.

UDIMET 700 is a wrought nickel-base alloy produced by vacuum-induction melting and further refined by vacuum-arc remelting. It has excellent mechanical properties at high temperatures. Among its applications are blades for aircraft, marine and land-based gas turbines and rotor discs. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-51. Producer or source: Special Metals Corporation. Originally published March 1959, revised January 1987.

MARINEL alloy is a very high strength cupronickel exhibiting immunity to hydrogen embrittlement. It is a wrought precipitation hardened alloy containing about 18% nickel and 5% manganese, strengthened by additions of aluminum, iron, chromium, and niobium, and has been developed to provide a corrosion resistant high strength bolting material for the most severe duties in offshore environments and on naval vessels. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: CU-602. Producer or source: Langley Alloys Ltd.

Nickel 200 and Nickel 201 are wrought metals of commercially pure nickel that are used in specific corrosive service, such as caustic alkali environments, or for their unique physical properties, particularly in the electronics industry. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining. Filing Code: Ni-539. Producer or source: Carpenter. Originally published March 1998, corrected June 1998.