Search Results for wrought copper alloys

Copper Alloy No. C72700 is a copper/nickel/tin alloy which is responsive to spinodal decomposition hardening. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: Cu-566. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. C72500 is a tin-bearing cupronickel. It has excellent hot and cold working characteristics. It is highly resitant to seawater corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-549. Producer or source: Copper and copper alloy mills.

Copper alloy No. C76390 is a wrought (rod) leaded nickel silver with nominally 24.5% nickel and 1% lead. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-553. Producer or source: Copper and copper alloy mills.

ANACONDA Alloy 210 has a composition that imparts to it a slightly greater strength than copper, corrosion resistance about the same as copper, and an excellent resistance to stress-corrosion cracking. It has good hot-working properties and excellent cold-working characteristics. Among its many applications are coinage, munitions, novelties and a wide range of miscellaneous uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-406. Producer or source: Anaconda American Brass Company.

COPPER ALLOY No. 210 is a 5% zinc brass having excellent cold working properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-255. Producer or source: Brass mills.

Berylco 165 is a lower cost version of the standard 1.9 percent beryllium copper alloy. It offers good formability in the unhardened condition with high final properties following precipitation hardening. It is also available in the mill hardened condition which, without heat treatment by the fabricator, reaches strengths and hardnesses appreciably higher than bronze. Through good formability, it offers cost-saving opportunities by eliminating hardening. It combines good ductility with high strength and hardness, good electrical and thermal conductivity, and excellent resistance to wear and fatigue. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-20. Producer or source: Beryllium Corporation. Originally published November 1954, revised April 1963.

BERYLCO 10 is a heat treatable, wrought, beryllium-copper alloy having high elastic and endurance strength, high ductility and impact strength, and high electrical and thermal conductivity. Since this material has good formability and machinability when heat treated, it is generally supplied in this condition, requiring no heat treatment by the fabricator. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-6. Producer or source: Beryllium Corporation.

Copper Alloy No. 175 is a wrought copper alloy that combines high strength with good electrical and thermal conductivities. It can be hardened by aging after a solution treatment. It is used for a variety of electrical hardware components and for industrial welding equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: Cu-333. Producer or source: Copper and copper alloy mills.

Copper Alloy No. C72600 is a wrought copper-nickel alloy. It has excellent capacity for cold work and may be readily joined by soldering, brazing, arc and resistance welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: Cu-563. Producer or source: Copper and copper alloy mills.

Copper No. 101 is a wrought oxygen-free, high-conductivity copper for electrical and electronic applications. Its trade designation is OFE (Oxygen Free Electronic) copper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-278. Producer or source: Copper and copper alloy mills.

Copper Alloy No. C68800 is a wrought copper-base alloy (modified brass) containing nominally 22.7% zinc, 3.4% aluminum and 0.40% cobalt. It has high strength and fairly good ductility. It can be hardened and strengthened further by heating temper-rolled material to 425 F where an ordering reaction occurs. Typical uses include springs, contacts, terminals and plug receptacles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-529. Producer or source: Copper and copper alloy mills.

ANACONDA Alloy 706 (also known as Cupro Nickel, 10% 706) is a wrought 90% copper-10% nickel alloy developed to provide a material less costly than the copper-nickel alloys containing 20 or 30% nickel, but yet offering much of their excellent reliability. This was achieved by adding 1.25% iron to Alloy 706 to increase its resistance to corrosion by salt water. Alloy 706 is recommended where good mechanical properties, weldability and corrosion resistance are needed. It is widely used for plates, tubing and piping that must resist seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-391. Producer or source: Anaconda American Brass Company.

UNS No. C10100 is a wrought oxygen-free, high-conductivity copper for electrical and electronic applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-538. Producer or source: Copper and copper alloy mills.

Copper No. 102 is a wrought oxygen-free high-conductivity copper. Its trade designation is OF (Oxygen Free) copper. It can be fabricated by all the conventional methods and is used widely for bus bars, bus conductors and other electrical conductors. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-368. Producer or source: Copper and copper alloy mills.

AMPCOLOY 522 is a wrought copper-nickel-iron alloy characterized by high strength and ductility, and by its excellent resistance to corrosion, especially in saline waters. It is well suited for temperatures up to 700 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-363. Producer or source: Ampco Metal Inc..

IN-838 is a wrought copper-15% nickel alloy with a controlled chromium addition for improved corrosion resistance in flowing sea water. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-297. Producer or source: Brass mills.

PFINODAL C72900 is a copper-base alloy that derives its strength from spinodal hardening. It is produced by the manufacturer's wrought powder-metallurgy process for strip metal. This process provides the homogeneity and uniformity needed to achieve fully the available properties of the alloy system. Pfinodal C72900 is available in a variety of tempers. It is used for electronic connectors, switches and springs, especially for those requiring an exceptional combination of strength, thermal stability, formability and corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-467. Producer or source: Pfizer Inc..

AMPCOLOY 83 is a wrought copper-base alloy containing nominally 1.8% beryllium. It offers good formability in the unhardened condition and can be strengthened by precipitation hardening. It has a combination of high strength and hardness, good ductility, good electrical and thermal conductivity, excellent resistance to wear and fatigue, and high resistance to general corrosion. Among its many uses are components for resistance welding, bushings and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-310. Producer or source: Ampco Metal Inc..

Copper C10300 combines good electrical conductivity with excellent hot and cold fabricability and joining characteristics (welding and brazing). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-561. Producer or source: Copper and copper alloy mills.

SOMERS LTA Copper is a wrought copper foil that can be annealed at 350 F in 15 minutes to the full-soft condition; its use simplifies the manufacture of printed circuits (LTA = Low-Temperature Annealable). LTA Copper is especially useful for foil weights up to and including one ounce per square foot (0.0014-inch thick) for laminating to high-temperature dielectric substrates. This datasheet provides information on composition, physical properties, and elasticity as well as fatigue. It also includes information on forming, heat treating, and machining. Filing Code: Cu-407. Producer or source: Olin Corporation.