Search Results for wear resistant alloys

The Stellite 700 series are wear-resistant alloys in which molybdenum replaces the tungsten used in traditional Stellite alloys. Both corrosion and wear resistance result. This datasheet provides information on composition, hardness, tensile properties, and compressive strength. It also includes information on corrosion and wear resistance. Filing Code: CO-101. Producer or source: Stoody Deloro Stellite Inc.

Nickel-Copper Alloys 505 and 506 are strong castings alloys. Both alloys combine high strength with good wear resistance. Alloy 505 (4% silicon) is employed where exceptional resistance to galling is needed. Alloy 506 (3% silicon) is recommended where good (but not exceptional) galling resistance is sufficient. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion and wear resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-215. Producer or source: Nickel alloy casting producers.

CARPENTER Wear Resistant HY MU 800A is a nickel-iron-molybdenum soft magnetic alloy containing fine aluminum oxide particles for increased wear resistance as encountered in tape recorder heads. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on wear resistance as well as forming and heat treating. Filing Code: Ni-356. Producer or source: Carpenter.

Tribaloy alloy T-800 was derived from an alloy family developed by DuPont. Excessive amounts of molybdenum and silicon included the formation during solidification of a hard and corrosion-resistant intermetallic coumpound, known as Laves phase. This datasheet provides information on composition, microstructure, and hardness. It also includes information on wear resistance. Filing Code: CO-99. Producer or source: Stoody Deloro Stellite Inc.

Tribaloy alloy T-900 is a cobalt-base alloy derived from an alloy family originally developed by DuPont. Excessive amounts of molybdenum and silicon induce the formatin during solidification of a hard and corrosion-resistant intermetallic coumpound, known as Laves phase. This alloy had improved crack resistance and a lower preheat temperature compared with Tribaloy T-800 (Alloy Digest Co-99, September 1996). This datasheet provides information on composition, microstructure, and hardness. It also includes information on corrosion and wear resistance. Filing Code: CO-100. Producer or source: Stoody Deloro Stellite Inc.

HAYNES STELLITE alloy No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-29. Producer or source: Haynes Stellite Company.

HAYNES STELLITE Alloy No. 12 is a cobalt-base alloy having high heat and corrosion resistance with excellent wear and abrasion resistance. It will withstand moderate shock and impact. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Co-30. Producer or source: Haynes Stellite Company.

HAYNES Alloy No. 90 is a high-chromium high-carbon iron-base alloy recommended for handling extreme conditions of wear, abrasion, and heat. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: SA-165. Producer or source: Union Carbide Corporation, Stellite Division.

Haynes Stellite No. 4 is a cobalt-base cast alloy recommended for handling severe conditions of abrasion, heat and corrosion. It is especially recommended to resist the severe abrasive and corrosive action of manganese dioxide, carbon particles, and ammonium and zinc chlorides in the battery mix used in the manufacture of dry batteries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-59. Producer or source: Union Carbide Materials Systems Division.

HAYNES STELLITE alloy No. 6K is a cobalt-base alloy with outstanding resistance to most types of wear. Its wear resistance is a built-in characteristic and not the result of heat-treatment, plating, nitriding, or other methods used to produce a superficial hardness on metal parts. Among its many applications are cutting knives and blades for many materials, apple-paring knives in canneries and wear strips in conveyor channels. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-20. Producer or source: Stellite Division, Cabot Corporation. Originally published May 1960, revised July 1978.

HAYNES STELLITE Alloy No. 6B is a cobalt-base alloy that is highly resistant to most types of wear. It has long service life even under constant erosive conditions, and it exhibits high resistance to seizure and galling even without lubricants. Its corrosion resistance is good in a wide variety of media. Its many uses include scrapper blades, screw conveyor flights and sleeves for seawater pump shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, and joining. Filing Code: Co-23. Producer or source: Stellite Division, Cabot Corporation. “Originally published September 1960, revised July 1979.”

REXALLOY 33 is a cast nonferrous cobalt-base alloy of chromium, tungsten and carbon which is recommended for cutting tools and wear-resistant parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Co-6. Producer or source: Crucible Steel Company of America. Originally published October 1954, revised January 1962.

HAYNES STELLITE Star J-Metal is a cobalt-base alloy recommended for handling extreme conditions of wear, abrasion and heat. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-31. Producer or source: Haynes Stellite Company.

CHROMIUM CARBIDE Grade 608 is a bonded chromium carbide having extremely high resistance to corrosion, erosion, wear and oxidation. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cr-1. Producer or source: Carboloy Department of General Electric Company.

Deloro 50 EXV is also called Deloro 53. It is a self-fluxing alloy for abrasion and corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as powder metal forms. Filing Code: Ni-683. Producer or source: Deloro Stellite Company Inc.

CARPENTER No. 408 Punch Steel was developed specifically to meet the needs of the pharmaceutical industry. It has the necessary wear resistance to withstand the severe conditions of handling the abrasive materials that must be pellitized. It also has high strength in combination with excellent toughness and resistance to splitting stresses. It has found a number of other uses requiring resistance to shock loading and splitting stresses, such as clutch parts, vise jaws and expander punches. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-368. Producer or source: Carpenter.

STELLITE 98M2 PM is a cobalt-base alloy (18.5 wt% W) recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: CO-88. Producer or source: Deloro Stellite Inc.

STELLITE 12 PM is a cobalt-base alloy (8 wt% W) recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Co-86. Producer or source: Deloro Stellite Inc..

STELLITE 3 PM (UNS R30103) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: CO-90. Producer or source: Deloro Stellite Inc.

STELLITE 31 PM is a cobalt-base alloy with 7.5 wt% W recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, joining, and powder metal forms. Filing Code: CO-92. Producer or source: Deloro Stellite Inc.