EnviroBrass III is one of a series of alloys pursued by an industry consortium to develop alloys that meet the National Sanitation Foundation’s standard on low lead pickup in water supply systems. The research showed that a combination of bismuth and selenium provides the same beneficial effect on machinability as does lead. EnviroBrass III contains up to 1.2% Bi and 0.1% Se and is suitable for permanent mold and pressure die castings. SeBiLOY was the original name used to represent these alloys (see SeBiLOY I, Alloy Digest Cu-605, June 1996, and SeBiLOY II, Alloy Digest Cu-606, revised October 1996). This datasheet provides information on composition, hardness, and tensile properties. It also includes information on casting and machining. Filing Code: CU-662. Producer or source: Copper and copper alloy mills.

NDZ-BRONZE is a copper-base alloy recommended as a high-strength dezincification and dealuminization resistant valve stem material in water supply systems. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and machining. Filing Code: Cu-113. Producer or source: R. Lavin & Sons Inc..

LAVIN NDZ-S BRONZE is a copper-base alloy recommended as a high-strength dezincification and dealuminization resistant valve stem material in water supply systems. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and machining. Filing Code: Cu-151. Producer or source: R. Lavin & Sons Inc..

SeBiLOY I (UNS C89510) is a selenium/bismuth-modified cast red brass alloy. Its low lead content helps meet the National Sanitation Foundation’s standard on low lead pickup in water supply systems. The Se/Bi modification permits machining similar to some of the red brasses it is replacing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, machining, and joining. Filing Code: CU-605. Producer or source: Copper and copper alloy mills.

SeBiLOY II (UNS C89520) is a selenium/bismuth-modified cast red brass alloy. Its low lead content helps meet the National Sanitation Foundation’s standard on low lead pickup in water supply systems. The Se/Bi modification permits machining exactly like the leaded red brasses it is replacing. This datasheet provides information on composition and physical properties. It also includes information on casting, machining, and joining. Filing Code: CU-606. Producer or source: Copper alloy producers.

DIWA 373 can be used for temperatures up to 500 C and is suitable for use in boilers and piping systems. It is available in thicknesses up to 250 mm (9.84 in.). Up to a thickness of 180 millimeter, it is supplied in normalized and tempered state, and above this thickness, water-quenched and tempered. DIWA 373 is based on the standardized 15NiCuMoNb5 grade. (Material No. 1.6368) EN 10028, Part 2. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: SA-625. Producer or source: Dillinger Hütte GTS.

MANGANESE BRONZE is a copper-zinc alloy having excellent combination of high strength and good corrosion resistance in fresh and salt water. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-58. Producer or source: American Manganese Bronze Company.

Colmonoy No. 63HV is a nickel-base alloy recommended for hard surfacing parts to resist wear, corrosion, heat, and galling. The hardness of Colmonoy 63HV ranges to 58–61 HRC, and it is resistant to abrasion. Colmonoy 63HV is sized exclusively for high-velocity oxygen-fuel thermal spray systems. This datasheet provides information on composition. It also includes information on heat treating, surface treatment, and powder metal forms. Filing Code: Ni-665. Producer or source: Wall Colmonoy Corporation.

HIDURON alloy 191 was developed for marine applications where both a combination of strength and good corrosion/ impingement resistance is needed. It finds applications in shafts, fasteners and valve stems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-601. Producer or source: Langley Alloys Ltd.

BRUSH WELLMAN SR-200E is a grade of beryllium strengthened by a dispersion of beryllium oxide (2.0%). It has relatively high strength and ductility (a minimum of 10% elongation). Its uses include missiles, space vehicles, structural parts on both commercial and military satellites and optical support benches. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-5. Producer or source: Brush Wellman Inc..

CABOT Ti-3A1-2.5V alloy is both lightweight and strong. It has a high strength-to-weight ratio which provides a major design advantage saving weight. It can be formed readily and it has good weldability. Seamless tubing of CABOT Ti-3A1-2.5V was developed for aircraft hydraulic and fuel systems and its performance has been proved by use in various types of aircraft and aerospace vehicles. CABOT Ti-3A1-2.5V is available as plate, sheet and seamless tubing and pipe. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-85. Producer or source: Cabot Wrought Products.

AQUAMET 17 is a precipitation-hardening stainless steel that provides the best combination of strength, toughness, wear resistance and corrosion resistance available for shafting where extra strength and precision straightness are needed. It is in wide use in various types of boats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-326. Producer or source: Armco Steel Corporation, Advanced Materials Division.

Allegheny Ludlum CP chemically pure titanium alloys feature low density and high strength-to-weight ratio. They are suitable for many corrosive chemical environments, including oxidizing chloride solutions, seawater, and chlorine-based bleaches. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming and joining. Filing Code: TI-115. Producer or source: Allegheny Ludlum Corporation. Originally published September 2000, corrected November 2000.

Sandvik Pressurfect is an austenitic chromium-nickel stainless steel with low carbon content used for high-pressure gasoline direct injection (GDI) fuel system. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-1195. Producer or source: Sandvik Steel Company.

NSSMC is a high temperature alloy with noted resistance to metal dusting. This datasheet provides information on composition. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-1216. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Nitronic 20 was designed for elevated-temperature use where high mechanical strength and resistance to oxidation and sulfidation are important. This stainless steel exhibits high mechanical strength throughout the 1000-1700 F (538-927 C) temperature range, yet it is malleable at forging temperatures and provides excellent hot workability. Nitronic 20 also retains ductility and ambient temperatures; this permits working or shaping by many conventional cold-forming processes. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-381. Producer or source: Armco Inc., Stainless Steel Division.

CARLSON ALLOY C625 has excellent strength and superior resistance to oxidation at temperatures up to 2000 F. Outstanding resistance to general corrosion, pitting, and stress-cracking in many environments. This alloy has exceptional fatigue strength and toughness at cryogenic temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-409. Producer or source: G.O. Carlson Inc..

BRUSH WELLMAN S-200F is beryllium strengthened by a dispersion of beryllium oxide (1.5%). It has moderate strength and moderate ductility (A minumum of 2.0% elongation). Its uses include optical equipment, nuclear reactors, instrumentation, optical substrates, satellite structures and solar arrays. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-4. Producer or source: Brush Wellman Inc..

JESSOP JS825 is a wrought nickel-iron-chromium-molybdenum-copper alloy for use in extremely corrosive environments. The many corrosion-resistant properties of JS825 make the alloy a suitable choice for a variety of difficult applications. It is suitable for such applications as chemical and petrochemical processing, pulp and paper manufacturing, flue gas desulfurization systems and metal pickling operations. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-293. Producer or source: Jessop Steel Company.

Dillidur 400V is a wear-resistant steel with surface hardness at room temperature of 370–430 HB. The steel is easy to weld, bend, and machine. Because of its high wear resistance and good welding performance, 400V is used in the production of agricultural machinery and industrial truck systems; it also finds use in crushing plants and waste disposal plants. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-636. Producer or source: Dillinger Hütte GTS.