Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

Copper Alloy 720 is a copper-nickel alloy having high corrosion resistance and retention of strength at moderately elevated temperatures. It is recommended for heat exchangers, salt water piping and relays. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-168. Producer or source: Copper and copper alloy mills.

Copper Alloy No. C72200 was developed to improve on the performance of the copper-nickel condenser tube alloys. It is essentially 85-15 copper-nickel with additions of 0.8% iron, 0.5% chromium and 0.5% manganese. It has exceptionally high resistance to erosion and corrosion by flowing seawater. Its strength and other mechanical properties are similar to the older copper-nickel alloys (90-10 and 70-30). Alloy C72200 is used primarily for condenser and heat-exchanger tubing using seawater and for salt-water piping. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-449. Producer or source: Copper and copper alloy mills.

ANACONDA Alloy 230 is a single-phase brass containing nominally 85% copper and 15% zinc. It is the most widely used of the low-zinc brasses. It has excellent resistance to dezincification and season cracking. Generally it is considered to be the most durable of all alloys for commercial water pipe in the practical price range. Other uses include architectural components, electrical conduit, paper rolls, razor handles and costume jewelry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-455. Producer or source: Anaconda American Brass Company.

Copper Alloy No. C70400 is a 5.5% nickel-copper alloy characterized by resistance to corrosion by high-velocity seawater, resistance to stress-corrosion cracking, and retention of strength at moderately elevated temperatures. It responds well to both hot and cold-working operations. Among its many uses are springs, switches, heat exchangers, salt-water piping and relays. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-500. Producer or source: Copper and copper alloy mills.

ANACONDA Alloy 706 (also known as Cupro Nickel, 10% 706) is a wrought 90% copper-10% nickel alloy developed to provide a material less costly than the copper-nickel alloys containing 20 or 30% nickel, but yet offering much of their excellent reliability. This was achieved by adding 1.25% iron to Alloy 706 to increase its resistance to corrosion by salt water. Alloy 706 is recommended where good mechanical properties, weldability and corrosion resistance are needed. It is widely used for plates, tubing and piping that must resist seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-391. Producer or source: Anaconda American Brass Company.

90-10 Cupro-nickel is a highly ductile, malleable and corrosion resisting alloy, suitable for water applications. The alloy has approximately 1.4% iron to improve its resistance to sea water. It has good resistance to general corrosion and erosion. Easily fabricated. Readily weldable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: CU-600. Producer or source: G.O. Carlson Inc.

PYROMET 102 is a nonmagnetic, nickel-chromium base alloy which is solid solution strengthened by the refractory metals niobium, tungsten and molybdenum. It possesses excellent corrosion properties, strength, ductility, toughness and structural stability. It is used as tubing and piping for steam and gas turbines, rocket engines, heat shields, furnace hardware, chemical plant hardware and in sea water environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-198. Producer or source: Carpenter Technology Corporation.

DIWA 373 can be used for temperatures up to 500 C and is suitable for use in boilers and piping systems. It is available in thicknesses up to 250 mm (9.84 in.). Up to a thickness of 180 millimeter, it is supplied in normalized and tempered state, and above this thickness, water-quenched and tempered. DIWA 373 is based on the standardized 15NiCuMoNb5 grade. (Material No. 1.6368) EN 10028, Part 2. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: SA-625. Producer or source: Dillinger Hütte GTS.

UNS No. G10450 is a plain carbon steel containing nominally 0.45% carbon. It may be used in four conditions: hot rolled, normalized, oil quenched and tempered or water quenched and tempered. It is a general-purpose construction and engineering steel and provides medium strength and medium toughness at low cost. It is suitable for flame- or induction-hardened parts. Among its many uses are axles, shafts, bolts, rods, pipe, wire and tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-115. Producer or source: Carbon steel mills.

SILICO ALLOY is a silicon-manganese shock-resisting tool steel; it has high toughness at relatively high operating hardnesses. It is primarily an oil-hardening steel because of its molybdenum content (0.45%); however, it may be water hardened. It is a low-cost, high-quality steel that combines high toughness with the advantages of oil-hardening non-deforming steels. Its relatively high hardenability coupled with high toughness makes it extremely useful for larges shear blades in severe service. Other applications include pneumatic tools, punches, hand chisels, rivet sets and pipe cutters. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-473. Producer or source: Columbia Tool Steel Company.

COPPER Alloy No. 704 is a 5% nickel-copper alloy characterized by resistance to corrosion by high velocity sea water, resistance to stress-corrosion cracking, and retention of strength at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-184. Producer or source: Copper and copper alloy mills.

LEAD is the heaviest, the most corrosion resistant and among the most malleable of the common metals. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, and joining. Filing Code: Pb-7. Producer or source: Primary lead producers.

Incoloy alloy 25-6Mo is superaustenitic, contains 6% Mo, and offers excellent corrosion resistance to neutral and acidic environments containing chlorides or other halides such as are found in air pollution control and flue gas desulfurization systems. The alloy is especially suited for service in high chloride environments such as brackish water, seawater, caustic chloride, and pulp mill bleach systems. This alloy is similar to Inco Alloy 25-6Mo (See Alloy Digest Ni-401, April 1992) and supersedes it. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-962. Producer or source: Special Metals Corporation.

MONEL alloy 450 is a 70-30 cupro-nickel with certain minor elements controlled to improve weldability. The alloy resists attachment of bio-fouling organisms. It resists stress-corrosion cracking in seawater environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-534. Producer or source: Inco Alloys International Inc..

CUPRO NICKEL, 10%-755 is a highly ductile, malleable and corrosion resisting alloy, suitable for condenser tubes and many other engineering applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-77. Producer or source: American Brass Company.

VDM 625 (Nicrofer 6020 hMo) is a nickel-chromium-molybdenum-niobium alloy with excellent resistance to a variety of corrosive media. In the soft annealed condition (grade 1), the alloy is used for wet corrosion applications and is approved by TÜV for pressure vessels in a temperature range from –196 to 450 °C (–320 to 840 °F). For high temperature applications above 600 °C (1110 °F), the solution annealed variant (grade 2) is generally used. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-760. Producer or source: VDM Metals GmbH.

COPPER ALLOY No. 706 is an alloy of copper and nickel which has been modified by the addition of approximately 1.4% iron to improve its resistance to salt water corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-231. Producer or source: Copper and copper alloy mills.

Ansonia alloy C23000 is a 15% Zn alloy with the previous trade name of Red Brass. It is bronze in color and often used in costume jewelry and ornamental trim. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-773. Producer or source: Ansonia Copper & Brass Inc.

Copper Alloy No. C70600 is a very resistant alloy in a seawater service. Failure in properly designed systems in such environments by general corrosion, pitting, crevice attack and stress-cracking can be discounted for this copper nickel alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-557. Producer or source: Copper and copper alloy mills.