Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

MUELLER Alloy 7060 is a copper-nickel-iron alloy. It has good strength at moderately elevated temperatures and can be fabricated by both hot and cold-working procedures. It contains nominally 11/4 iron to increase its resistance to corrosion and erosion. It has good resistance to corrosion by salt water and is used in marine service. It is used widely for condenser tubes, distiller tubes, heat exchangers, evaporators and water heaters for domestic service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-501. Producer or source: Mueller Brass Company.

Cupro Nickel, 30%-716 is a high strength copper-nickel-iron alloy for heat exchanger tubes in power plant feed water heaters, and also for oil refinery service. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Cu-200. Producer or source: Anaconda American Brass Company.

Type 441 is a fully ferritic stainless steel with extra-low carbon and nitrogen contents. The alloy is resistant to stress-corrosion cracking and also has corrosion properties comparable to AISI type 316. Type 441 has a high yield strength, good weldability, and good formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-901. Producer or source: J & L Specialty Steel Inc.

INX-Steels are a series of mild carbon structural steels of balance composition with columbium and/or vanadium additions to obtain seven separate levels of minimum yield points. This datasheet provides information on composition and tensile properties. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: CS-23. Producer or source: Inland Steel Company.

Ni-Cr 60-16 Alloy is an electrical-resistance alloy suitable for operation at temperatures up to 1700 F (927 C). It is ideal for heavy-duty controls and rheostats because it withstands high overloads. It is used in many domestic appliances and is very useful where space is a factor because of its high strength in small sizes and its high electrical resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Ni-232. Producer or source: Electrical resistance alloy producers.

Avesta Polarit 430 Ti is a ferritic stainless steel with good high-temperature strength and an optimal weldability and formability. The alloy is not susceptible to chloride-ion stress-corrosion cracking, has good resistance to oxidation, and very good aqueous corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-837. Producer or source: AvestaPolarit AB.

ALUMINUM 6066 is a heat treatable aluminum alloy having good strength and excellent fabricating characteristics. It was developed as an extrusion alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-63. Producer or source: Harvey Aluminum Company.

Electralloy EC926 Mo is a solution strengthened, austenitic stainless steel alloy providing excellent resistance to aqueous corrosion, coupled with good strength and pitting resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1069. Producer or source: Electralloy, a division of G.O. Carlson Inc.

ATI 2003 lean duplex stainless steel (LDSS) is a molybdenum-enhanced, duplex stainless steel alloy. Cr, Ni, Mo, and N are controlled to give a phase balance similar to that of ATI 2205 duplex stainless steel, while reducing costs. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1258. Producer or source: Allegheny Technologies Inc..

AvestaPolarit LDX 2101 is a lean duplex steel for construction purpose. The alloy has low nickel content, but is balanced with manganese and nitrogen. Applications include exposed load-carrying structural materials for bridges as well as rebar for many construction uses. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-863. Producer or source: AvestaPolarit AB.

LDX 2404 is a lean duplex stainless with molybdenum and high mechanical properties. It is designed to replace Type 304/304L in many applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1090. Producer or source: Outokumpu Stainless Inc..

ANACONDA Alloy 443 is a brass alloy commonly known as ARSENICAL ADMIRALTY 443 because the addition of nominally 0.04% arsenic greatly inhibits its corrosion by dezincification. It stands up extremely well against corrosion by fresh, brackish or salt waters ranging from slightly acid to slightly alkaline. It also prossesses good resistance to corrosion by waters containing sulfides. It has moderate strength and good ductility. For a long time, this alloy has been considered a standard for condenser and heat-exchanger tubes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-422. Producer or source: Anaconda American Brass Company.

AL 29-4C is a highly corrosion resistant alloy with a relatively high strength. This combination allows the use of lighter gage tubes, and has led to its use in the brine heat exchangers of geothermal power plants. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-554. Producer or source: Allegheny Ludlum Corporation.

Crucible 26-1 is a fully ferritic, titanium-stabilized, high-chromium stainless steel characterized by outstanding resistance to pitting and stress corrosion in chloride-containing environments. The steel is weldable and very resistant to intergranular corrosion after welding. It is produced by electric-furnace melting and AOD (Argon-Oxygen Deoxidation) refining. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-306. Producer or source: Crucible Stainless Steel Division, Colt Industries.

Avesta Sheffield SAF 2304 is an austenitic/ferritic duplex stainless steel with high tensile strength, impact toughness with good workability and weldability. The alloy has high resistance to chloride stress-corrosion cracking and good resistance to pitting, crevice, and general corrosion. It has higher thermal conductivity and a lower coefficient of thermal expansion than austenitic stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-649. Producer or source: Avesta Sheffield Inc.

TECHALLOY A (80-20) is a nickel-chromium electrical resistance alloy for operating temperatures up to 2150 F. It is non-magnetic, highly corrosion resistance, and has a lower temperature coefficient of resistance than other alloys for heater elements. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-220. Producer or source: Techalloy Company Inc..

ATI 2003 (UNS S32003) is a molybdenum-enhanced lean duplex stainless steel (LDSS) that was developed to fill the performance gap between type 316L (UNS S31603) and 2205 duplex (UNS S32205) stainless steels. ATI 2003 has reduced alloy content, which makes it less costly than 2205 duplex, yet ATI 2003 retains the high strength level characteristic of duplex grades. Compared to type 316L, ATI 2003 has increased strength, better corrosion resistance, and greater cost stability. These and other factors make ATI 2003 an attractive alternative for a variety of applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1335. Producer or source: ATI.

UNILOY 50Cr/50Nj is an improved corrosion-resistant, wrought alloy with outstanding resistance to a wide variety of corrosive media. It is recommended for oil refinery heaters, incinerator components, metallurgical heat treating furnace components and reactor vessels for treating pulping liquors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cr-2. Producer or source: Universal Cyclops Steel Corporation.

Cupro Nickel, 30%-707 is a high strength copper-nickel-iron alloy for heat exchanger tubes in power plant feedwater heaters. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Cu-133. Producer or source: Anaconda American Brass Company.