INCOLOY Alloy 925 is an age-hardenable nickel-iron-chromium alloy. It provides high strength at temperatures up to 1000 F (540 C). It was developed for use in oil-production tubular products, tool joints, and equipment for surface and down-hole hardware for intermediate sour-gas wells. It is recommended for a number of other applications where resistance to general corrosion and pitting are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-297. Producer or source: Huntington Alloys Inc..

HASTELLOY G-50 alloy solves specific needs for applications in sour gas service when strength and corrosion resistance are needed. The alloy is available in tubular products. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance, and corrosion resistance. Filing Code: Ni-423. Producer or source: Haynes International Inc.

SANDVIK Sanicro 28 is an all-purpose low-carbon stainless steel alloy for service in highly corrosive environments. It has exceptionally high resistance to various types of corrosive attack and has good weldability. Among its numerous applications are evaporator tubes in the production of phosphoric acid; down-hole tubulars in deep, sour gas wells; piping and heat-exchanger tubes in sulfuric acid service and seawater cooled heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-442. Producer or source: Sandvik. See also Alloy Digest SS-831, September 2001.

Sumitomo SMC276-125 (minimum yield strength of 125 ksi, or 862 MPa) is a high-strength nickel alloy (nominal 16% Mo) for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-738. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

ANTIMONIAL LEAD ALLOYS are binary alloys containing from 1 to 12% antimony, balance lead. They are also called HARD LEAD, the antimony being used to increase the hardness and strength of lead. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, and joining. Filing Code: Pb-9. Producer or source: Lead producers.

Sumitomo SM2050 is a high strength nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-729. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sumitomo SM2050-125 is a high-strength nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-736. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sumitomo SMC276-110 (minimum yield strength of 110 ksi, or 758 MPa) is an austenitic high-strength nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-730. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sumitomo SM2242 is a high strength austenitic stainless steel for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1259. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Haynes HR-224 has excellent oxidation resistance and improved fabricability and weldability compared to Haynes 214 alloy. This datasheet provides information on composition and tensile properties. It also includes information on high temperature performance as well as forming. Filing Code: Ni-727. Producer or source: Haynes International Inc..

Sumitomo SM2242-125 is a high strength austenitic alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-734. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sumitomo SM2550-125 is a high strength nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-735. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sumitomo SM2550 is a high strength austenitic nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1262. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sumitomo weldable seamless 13Cr-M is a corrosion-resistant oil country tubular goods line pipe product that resists wet hydrocarbon products containing carbon dioxide. Increased weldability is developed by modifying the chemistry to ultralow carbon content. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as joining. Filing Code: SS-752. Producer or source: Sumitomo Metal Industries Ltd.

Sandvik Sanicro 29 is a corrosion resistant grade (CRA) available as seamless product heavily cold worked for oil country tubular applications at high strengths. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1169. Producer or source: Sandvik Steel Company.

AIRCO METAL-COR 6 is a continuous tubular steel welding electrode with a powdered-metal core; gas shielding rather than slag is used to protect the core. It eliminates 50 to 70% of the smoke and fumes generated by self-shielded flux-cored electrodes and about 30% of the smoke from gas-shielded flux-cored electrodes. Metal-Core 6 is used to deposit typically 1.6 to 1.8% manganese steel weld metal that provides as-deposited tensile strength in the range 85,000 to 92,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-381. Producer or source: Airco Welding Products.

VERTI-COR Welding Electrode is a continuous tubular steel welding electrode with a powdered-metal-and-flux core; gas shielding and slag are used to protect the molten electrode and weld metal. The VERTI-COR Welding Electrode is used for all-position welding and is a member of the FLUXCOR family of electrodes. It is used to deposit typically 1.6 to 1.9% manganese steel weld metal that is tough and has tensile strengths in the range 80,000 to 97,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-384. Producer or source: Airco Welding Products.

CENTRALLOY 4852 (HP + Nb) is a cast austenitic 35% nickel-25% chromium alloy plus niobium (columbium). The alloy possesses excellent structural stability, high temperature stress rupture strength, oxidation and carburization resistance. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting and joining. Filing Code: SS-609. Producer or source: Centracero S.A.

CENTRALLOY 4848 (HK-40) is a cast austenitic 25% chromium-20% nickel-stainless steel. A balanced composition provides excellent structural stability, high stress rupture strength and good resistance to oxidation and carburization. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-604. Producer or source: Centracero S.A.

STROLOY 5C is a high-strength low-alloy steel developed for seamless hot-or-cold finished tubing and extruded shapes in the water-quenched-and-tempered condition. In this condition the steel exhibits high tensile and yield strengths and good ductility. It can be are welded readily using the procedures prescribed by the manufacturer. Preheat, postheat and stress relief normally are not required. Stroloy 5C tubing is used for applications requiring a good combination of strength, toughness and weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-410. Producer or source: Babcock & Wilcox Company. See also Alloy Digest SA-213, revised December 1976.