SAE 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%) which contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-84. Producer or source: Carbon steel mills.

AISI 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%); this contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-109. Producer or source: Carbon steel mills.

HPS 100W is specified in ASTM A 709 (Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges) and is being added to AASHTO M270. Initial applications were planned to be those in which an owner bridge engineer would approve the use of HPS 100W. This steel would be most useful for depth control over piers in long-span girder bridges or controlling the size of high-stressed elements in long-span steel truss bridges. This datasheet provides information on composition and tensile properties. It also includes information on forming and joining. Filing Code: SA-555. Producer or source: International Steel Group Inc.

NORAL B54S is a non-heat treatable aluminum alloy characterized by high strength, excellent corrosion resistance especially in marine atmospheres, and excellent welding characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-90. Producer or source: Northern Aluminium Company Ltd.

Alloy CuSn5 (UNS C51000) is a high-performance copper alloy. The alloy is characterized by good tensile strength, good electrical conductivity, and very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Cu-871. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

UNS G10370 is a medium carbon, plain carbon steel. In bar form the steel is often used in the as-hot rolled condition. Cold drawn bars have attractive combinations of mechanical and dimensional properties and are widely used in mass production of machined and other parts. UNS G10370 is also used as a structural plate steel. See also Alloy Digest CS-124, May 1990. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-127. Producer or source: Carbon steel mills.

Wieland-B18 is a phosphor bronze with a composition that allows usage in slightly more severe service conditions than alloy B16 (UNS C52100). A common application is in slide bearings and slideways. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-696. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

BRUSH WELLMAN S-200F is beryllium strengthened by a dispersion of beryllium oxide (1.5%). It has moderate strength and moderate ductility (A minumum of 2.0% elongation). Its uses include optical equipment, nuclear reactors, instrumentation, optical substrates, satellite structures and solar arrays. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-4. Producer or source: Brush Wellman Inc..

BRUSH WELLMAN S-65B is a grade of beryllium strengthened by a dispersion of beryllium oxide. It has moderate strength and fairly low ductility (a minimum of 3% elongation). Its uses include optical applications, nuclear reactors, instrumentation, X-ray windows, high-speed computer parts, audio components and aerospace structural applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-3. Producer or source: Brush Wellman Inc..

SAE 1030 is a plan carbon steel containing nominally 0.30% carbon. It is used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose engineering and construction. It provides medium strength and toughness at low cost. Among its many uses are axles, bolts, gears and building sections. All data cited herein are on a single heat of fine-grain steel, 5-7 grain size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-128. Producer or source: Carbon steel mills.

AISI C1030 a medium-carbon steel used in the hot-rolled, normalized or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-34. Producer or source: Carbon and alloy steel mills.

SAF 1039 steel can be used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose construction and engineering. Its manganese content is a little higher than some of the other standard carbon steels with comparable carbon levels; this gives it slightly higher hardenability and hardness. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-66. Producer or source: Carbon steel mills.

SAE 1037 is a carbon steel that provides medium strength and medium toughness at low cost. It is used in the hot-rolled, normalized, oil-quenched-and-tempered and water-quenched-and-tempered conditions. This medium-carbon steel is used for construction and for general-purpose engineering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-76. Producer or source: Carbon steel mills.

SAE 1046 can be used in a variety of conditions: hot rolled, annealed, normalized, oil quenched and tempered, water quenched and tempered or austempered. It is a general-purpose construction and machinery steel. It furnishes medium strength and toughness at a low cost. It is frequently used for flame or induction-hardened parts. Its many uses include axles, bolts, pins, shafts and forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-81. Producer or source: Carbon steel mills.

AISI 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-41. Producer or source: Carbon and alloy steel mills.

AISI 1524 is a low-to-medium carbon steel combining good workability, good machinability and good weldability. It is used in the hot-rolled, annealed, normalized, cold-worked or water-quenched-and-tempered condition for a variety of applications. It is also used for parts case-hardened by carburizing. It has a high manganese content (1.35-1.65%) to provide increased hardenability which is reflected in all uses and gives increased strength and hardness in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-61. Producer or source: Carbon steel mills.

AISI 1018 is a carbon steel with a relatively high manganese content (0.60-0.90%) which provides increased hardenability in all applications and increased hardness and strength in the core of carburized parts and in uncarburized uses. AISI 1018 combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-56. Producer or source: Carbon steel mills.

SAE 1044 is a medium-carbon steel suitable for use in the hot-rolled, normalized, oil-quenched-and-tempered, or water-quenched-and-tempered conditions. It provides medium strength and toughness at low cost and is a general-purpose construction and engineering steel. It is frequently used for flame or induction-hardened parts; its relatively low manganese contributes to a soft, ductile core in these parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-59. Producer or source: Carbon steel mills.

AISI 1043 is a carbon steel that provides medium strength and medium toughness at relatively low cost. It can be used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-tempered condition for general-purpose construction and engineering. Its manganese content is a little higher than that of some of the other standard carbon steels with comparable carbon levels; this gives it slightly higher hardenability and hardness. It can be used for flame or induction-hardened parts; its relatively high manganese contributes to a strong core in these parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-85. Producer or source: Carbon steel mills.

ALUMINUM 5086 is a non-heat-treatable aluminum alloy. It is characterized by high strength, excellent weldability and excellent resistance to corrosion. Among its many uses are structural towers, welded boat hulls, tanks and pipe lines. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-28. Producer or source: Aluminum alloy mills. Originally published July 1955, revised February 1960,revised December 1981.