Search Results for transportation application

ATI 201L HP is a 200-series, Cr-Mn-Ni austenitic stainless steel. It is comparable to the Cr-Ni stainless steel types 301, 304, and 304L in many respects, and can even provide some advantages versus the 18-8 grades in certain applications. Since it possess a very desirable combination of economy plus good mechanical properties and corrosion resistance, it has been used in a wide variety of consumer and transportation applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1346. Producer or source: ATI.

ATI 201 HP is a 200-series, Cr-Mn-Ni austenitic stainless steel. It is comparable to the Cr-Ni stainless steel types 301, 304, and 304L in many respects, and can even provide some advantages over the 18-8 grades in certain applications. Because it possess a very desirable combination of economy plus good mechanical properties and corrosion resistance, it has been used in a wide variety of consumer and transportation applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1332. Producer or source: ATI.

AK Steel Type 301 is an austenitic chromium-nickel stainless steel that provides high strength and good ductility when cold worked. It is a modification of Type 302, in which the chromium and nickel contents are lowered to increase the cold-work-hardening range. This permits higher tensile strengths to be achieved by rolling with a lower loss of ductility than with Type 302. The high-strength properties of Type 301 make it ideally suited to structural and transportation applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-861. Producer or source: AK Steel Corporation.

SSC Invar 36 was developed for use in applications where dimensional stability is essential. It is a nickel-iron alloy with a very low coefficient of thermal expansion from cryogenic temperatures to 200 deg C (390 deg F). It is utilized in aerospace composite tooling and die applications, as well as laser components, and cryogenic components and piping: liquefied natural gas production, storage, and transportation. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Fe-158. Producer or source: Sandmeyer Steel Company. Originally published December 2011, revised February 2012.

Armco 409 Ni is a fine-grain stainless steel developed for applications more than 0.120 in. thick needing an alloy superior to Type 409 stainless steels in weld formability and toughness. Applications include coal-handling equipment, transportation containers, mixers, liners, exhaust flanges, heat shields, and cyclones. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-663. Producer or source: Armco Inc., Specialty Flat-Rolled Steels.

AISI 5147 is a low-chromium (nominally 1% chromium), intermediate-hardenability alloy steel for medium-duty applications. It is normally hardened by quenching in oil. It has a wide range of applications for transportation equipment, farm implements, tools and industrial machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-334. Producer or source: Alloy steel mills and foundries.

ALUMINUM 2017 is an age-hardenable wrought alloy of medium strength and ductility. Its service temperature is below 212 F. It is used for general engineering applications, such as transportation equipment, machine parts and fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Al-58. Producer or source: Various aluminum companies. Originally published October 1957, revised August 1974.

Docol 450 Wear is an ultra-high strength steel that is used for many wear application in transportation and construction products. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength. It also includes information on wear resistance as well as joining. Filing Code: SA-546. Producer or source: SSAB Swedish Steel Inc.

CREUSOT-9D6 is a weldable 9% nickel steel recommended for low temperature applications such as storage and transportation tanks, liquified gas equipment, and cryogenic structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-228. Producer or source: Societe Des Forges et Ateliers du Creusot.

Remainit 4318, similar to type 301LN, is in the family of lowest-alloyed austenitic stainless steels. This type has the highest rate of work hardening. Typical applications include the transportation industry and conveyor belts for food processing. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-651. Producer or source: Thyssen Stahl AG.

Kaiser Aluminum alloy 2017 has good machinability and good mechanical properties. It is used in rivets. General structural applications, and transportation. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-355. Producer or source: Kaiser Aluminum Corporation.

Alcoa 2324-T39 plate is an age-hardenable high-strength version of alloy 2024 (Alloy Digest Al-23, August 1973, and Al-346, March 1998). The 2324-T39 alloy is used where higher strength; toughness, and good resistance to fatigue-crack propagation are needed. A typical application is the lower wing skin of commercial transport aircraft. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: AL-373. Producer or source: Alcoa Mill Products Inc.

Refractory Sheet Type 100 is an engineered ceramic, fiber reinforced structural alumina composite with useful properties in thermal, structural and electrical insulation applications; as well as the transport of molten nonferrous metals to 1260 C (2300 F). This datasheet provides information on composition, physical properties, and compressive strength. It also includes information on corrosion resistance as well as machining. Filing Code: Cp-19. Producer or source: Zircar Products Inc..

Endur-Al is an advanced 5456 alloy in H34 temper that was developed for maritime applications. The alloy has exceptional surface hardness and abrasion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion and wear resistance as well as forming and heat treating. Filing Code: Al-440. Producer or source: Alcoa Europe SA.

Forta H500 is an austenitic stainless steel in which manganese replaces some of the nickel. Its high-nitrogen content adds strength. Grades Forta H800 and H1000 can be derived from the same composition by changing the degree of work hardening. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-1278. Producer or source: Outokumpu Stainless AB, Avesta Research Centre.

INLAND HI-FORM Steels are a low-carbon, low or intermediate-manganese, low-sulfur, aluminum-killed, fine-grain, columbium and/or phosphorus-bearing series of high-strength steels providing greatly enhanced forming and bending properties. These steels are furnished in minimum yield strength levels from 40,000 to 80,000 psi. They are used widely in the transportation and mobile-equipment industries. See also Ispat Inland Cal Hi-Form 80Y100T, Alloy Digest CS-136, May 2003. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-346. Producer or source: Ispat Inland Inc..

AISI 4032 is a molybdenum alloy steel of moderate hardenability. It is used extensively in the automotive industry. This steel combines moderate strength and hardness with good ductility and toughness in the quenched-and-tempered condition because it is relatively free from temper embrittlement when tempered in the range 850-1100 F. Among its many uses are nuts, bolts, studs, machinery parts and fasteners for the transportation and other industries. AISI 4032H is a similar steel except that it has a slightly wider range of carbon and manganese. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-411. Producer or source: Alloy steel mills and foundries.

CRONIFER 2328 is a titanium-stabilized, high-chromium and high-nickel austenitic stainless steel with additions of molybdenum and copper. It exhibits good corrosion resistance against sulfuric and phosphoric acids. Also, it has good resistance against pitting and stress-corrosion cracking. Cronifer 2328 is used widely in the chemical industry for equipment and for the storage and transportation of various acids and solutions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-411. Producer or source: Vereingte Deutsche Metallwerke AG.

AlcoTec Weld Filler Wire 5654 is a nonheatable wire with moderate high-strength capabilities. The principal alloying elements are magnesium, manganese, chromium, and titanium. This datasheet provides information on composition, physical properties, and shear strength. It also includes information on corrosion resistance as well as joining. Filing Code: AL-379. Producer or source: AlcoTec Wire Corporation.

Alcotec Weld Wire 5554 is a non-heat-treatable filler wire with moderate high-strength capabilities. The principal alloying elements are magnesium, manganese, chromium, and titanium. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on low and high temperature performance as well as joining. Filing Code: AL-377. Producer or source: AlcoTec Wire Corporation.