Search Results for tie rods

AISI 1137 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to provide free-machining characteristics. It is recommended especially for high-production automatic machine products. AISI 1137 has relatively low hardenability. In the longitudinal direction its ductility and toughness are fairly good but in the transverse direction they tend to be low. Its many uses include spline shafts, mine-car axles and shafts, gears, bolts, tool holders and tie-rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-97. Producer or source: Carbon steel mills.

REVERE No. 429 is an aluminum bronze having good physical properties and high resistance to acids as well as fresh and salt waters. It is recommended for condenser tubes, bolts and tie rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-114. Producer or source: Revere Copper and Brass Inc..

Ansonia alloy C65500 and C66100 are high silicon bronze and leaded high silicon bronze alloys that are high strength; the latter are the machinable equivalent. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-767. Producer or source: Ansonia Copper & Brass Inc.

SCOBRONZE, also known as Scovill No. 381 Alloy, is a copper-zinc alloy containing tin for increased strength and fatigue characteristics and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-48. Producer or source: Scovill Manufacturing Company.

Copper Alloy No. C61800 is an aluminum bronze containing nominally 89% copper, 10% aluminum and 1% iron. It has moderate strength, moderate ductility and can be hot worked or cold worked successfully. It has good resistance to corrosion in many environments. Its numerous uses include bushings, bearings, corrosion-resistant components and welding rod. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-492. Producer or source: Copper and copper alloy mills.

Jalcase 9 is a carbon-manganese cold finished steel having free-cutting characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: CS-16. Producer or source: Jones & Laughlin Steel Corporation.

AMBRALOY 610 is an aluminum bronze; nominally it contains 92% copper and 8% aluminum. It is an engineering material of medium strength and ductility and a good capacity for being hot worked or cold worked. It has excellent esistance to corrosion and an attractive gold color which makes it highly suitable for decorative applications. Its engineering uses include shafts, bolts and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-465. Producer or source: ARCO Metals Company, American Brass. Originally published October 1983, revised January 1984.

SPS Technologies MP35N is a multiphase cobalt-nickel alloy that possesses a unique combination of ultra-high strength, good ductility and toughness, outstanding corrosion resistance, and excellent cryogenic properties. It was the first fastener superalloy developed by SPS Technologies. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-140. Producer or source: SPS Technologies, Inc.

Copper Alloy No. C61000 is an aluminum bronze containing nominally 92% copper and 8% aluminum. It is characterized by medium strength, medium ductility and a good capacity for being hot formed or cold worked. It has good resistance to corrosion. Its many uses include shafts, pump parts and bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-458. Producer or source: Copper and copper alloy mills.

Dura-Bar G2S is a high strength, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of superior hardenability, strength, and creep resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-80. Producer or source: Charter Dura-Bar, Inc.

JALCASE No. 8 is a carbon-manganese cold finished steel having free-cutting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: CS-10. Producer or source: Jones & Laughlin Steel Corporation.

AISI 1151 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. Its ductility and toughness are reasonably good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Its uses include axles and shafts, spindles, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-103. Producer or source: Carbon steel mills.

AISI 1132 is a relatively tough, manganese alloy steel characterized by its free-machining qualities. It is recommended especially for high production machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-53. Producer or source: Carbon steel mills.

Dura-Bar G2 is a gray cast iron bar is used for continuous cast products. It is a good fit for a variety of applications due to its good machinability, wear resistance, and vibration damping properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining. Filing Code: CI-65. Producer or source: Charter Dura-Bar, Inc.

RYTENSE is a medium carbon, high strength machinery steel having a high machinability rating. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-9. Producer or source: Joseph T. Ryerson & Son Inc. (Distributor).

6092/SiC/17.5P is a discontinuous metal-matrix composite fully characterized for discontinuously reinforced alloy (DRA) structural applications. The base alloy is Aluminum Association 6092, and the reinforcement material is SiC. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on as well as machining and surface treatment. Filing Code: AL-359. Producer or source: DWA Aluminum Composites.

AISI 1141 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to give it free-machining characteristics. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but tend to be low in the transverse direction. It is highly recommended for high-production automatic-machine products. Among its many uses are screws, bolts, ball joints, spindles and light-duty gears. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-93. Producer or source: Carbon steel mills.

AISI 1146 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Among its many uses are axles and shafts, screws, spindles, ball joints, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-102. Producer or source: Carbon steel mills.

AISI 1139 is a carbon steel containing 1.35-1.65% manganese and 0.13-0.20% sulfur to furnish free-machining characteristics. It is recommended especially for high-production machined products. Among its many applications are splined shafts, screws, arbors, tool holders and propeller shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-82. Producer or source: Carbon steel mills.

AISI C1141 is a tough, carbon-manganese steel characterized by its free-machining qualities. It is especially recommended for high production automatic machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-13. Producer or source: Carbon and alloy steel mills.