Meehanite GB300 is a pearlitic gray cast iron that has a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This grade exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials, such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-75. Producer or source: Meehanite Metal Corporation.

ISO 185/JL/350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a tensile strength of 350–450 MPa (51–65 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides a combination of high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on wear resistance as well as casting and heat treating. Filing Code: CI-85. Producer or source: International Organization for Standardization.

JSA FC350 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 350 MPa (51 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: CI-92. Producer or source: Japanese Standards Association (JSA).

Meehanite GA350 is a heat-treatable, pearlitic gray cast iron that exhibits high strength while still maintaining good thermal conductivity and good machinability. It is generally used for applications where the thermal conductivity requirements preclude the use of other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: CI-72. Producer or Source: Meehanite Metal Corporation.

ISO 185/JL/300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix; it has a tensile strength of 300–400 MPa (44–58 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. It provides high strength while still maintaining good thermal conductivity compared with other types of cast iron. This grade approaches the maximum tensile strength attainable in gray cast iron. Applications therefore tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-82. Producer or source: International Organization for Standardization.

JSA FC300 is a higher-tensile-strength gray cast iron that has a pearlitic matrix, and a minimum tensile strength of 300 MPa (44 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. The tensile strength of JSA FC300 approaches the maximum tensile strength attainable in gray cast iron. It provides a combination of high strength while still maintaining good thermal conductivity. Applications, therefore, tend to be confined to those where thermal conductivity requirements in service preclude the use of one of the other higher-strength materials such as spheroidal graphite cast irons, which have inferior thermal properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting and heat treating. Filing Code: CI-97. Producer or source: Japanese Standards Association (JSA).

BORALLOY Pyrolytic Boron Nitride is an easily machined, easily fabricated, high purity inert construction material offering a unique combination of electrical, mechanical and thermal properties. This datasheet provides information on composition, physical properties, microstructure, elasticity, tensile properties, and compressive, shear, and bend strength. It also includes information on machining and joining. Filing Code: Cer-7. Producer or source: Union Carbide Coatings Service Corporation.

Wieland-L49 has excellent cold working and corrosion properties. Its composition makeup gives it better protection to more severe atmospheres than other copper alloys. Although it does not have as good electrical and thermal properties as other copper alloys, it is used in more critical applications, such as circuit boards, because of its corrosion properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-703. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

Swissmetal alloy CuNi1P is age-hardenable for strength but retains good electrical/thermal properties with good formability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: CU-651. Producer or source: Swissmetal Metalworks Ltd, Plant Boillat.

Austral Wright 5% Phosphor Bronze (UNS C51800) is a wrought copper-tin-phosphorus alloy. It is the most widely used grade of wrought phosphor bronze. It is harder, stronger and stiffer than the wrought brasses and, in strip and wire form, is produced with a combination of excellent cold formability, high strength and good corrosion resistance, which makes it ideal for use as springs. It also has a low coefficient of friction against steel. This makes it a popular choice for wear resistant guide strips and similar bearing applications involving boundary lubrication conditions. The alloy has adequate electrical and thermal properties, which helps it find applications in current-carrying and heat transfer applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: Cu-929. Producer or source: Austral Wright Metals.

Deloro 50 EXV is also called Deloro 53. It is a self-fluxing alloy for abrasion and corrosion resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as powder metal forms. Filing Code: Ni-683. Producer or source: Deloro Stellite Company Inc.

Al-SiC is a 68% volume fraction alpha-silicon carbide aluminum alloy. Al-SiC materials provide superior thermal management for high technology electronics applications in a lightweight, cost-effective material. This datasheet provides information on composition, physical properties, microstructure, tensile properties. It also includes information on forming and surface treatment. Filing Code: Al-438. Producer or source: AMETEK Specialty Metal Products.

Thyrodur 2767/2767 Supra is a cold-work tool steel with high hardenability for punching tools. Thyrodur 2767 Supra is the electroslag remelted version. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating. Filing Code: TS-651. Producer or source: Schmolz + Bickenbach USA Inc.

Schmelzmetall Hovadur CNCS is a heat-treatable, copper-nickel-silicon-chromium alloy. In the precipitation hardened condition it exhibits high thermal and electrical conductivity coupled with high strength and high hardness. It is a suitable substitute for copper-beryllium alloys in many applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-932. Producer or source: Schmelzmetall AG.

Luvata C510 is a very common and frequently used alloy. The 5% Sn and 95% Cu alloy is deoxidized with 0.2% P. It is often called CuSn5. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. and bend strength. It also includes information on forming. Filing Code: CU-780. Producer or source: Luvata Sales (USA) Inc.

SANDVIK 15N2 is strip steel for stonecutting saws and especially designed for the manufacture of diamond saw blades. This datasheet provides information on composition, physical properties, hardness, and tensile properties. Filing Code: CS-134. Producer or source: Sandvik.

Carlson Alloy C800 AT has superior creep and rupture strengths over long-term exposure to high temperatures and higher ASME boiler and pressure-vessel design stress allowables than C800 H. The alloy resists stress-corrosion cracking, resists sulfur attack, internal oxidation, scaling and corrosion in thermal processing and heat-transfer applications. The strength is obtained by a selective chemistry range within that of Alloy C800 H. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. Filing Code: Ni-459. Producer or source: G.O. Carlson Inc.

JESSOP JS Alloy B-2 is a nickel-molybdenum alloy with outstanding corrosion resistance in the as-welded condition. It can be used up to 1000 F and, with proper atmospheric protection, above 1500 F. In the range 1000-1500 F the alloy exhibits reduced ductility and use in that temperature range is to be avoided. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-363. Producer or source: Jessop Steel Company.

Concast C95500 is a cast nickel-aluminum bronze alloy. Aluminum bronze is the highest strength standard copper-based alloy. The nickel content in C95500 greatly enhances its mechanical strength, and wear and corrosion resistance, making it suitable for heavyduty applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as machining and joining. Filing Code: Cu-900. Producer or source: Concast Metal Products Co..

MAGNUM ABS 9450P is specifically designed for platable parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. Filing Code: P-20. Producer or source: The Dow Chemical Company, Dow Plastics.