LSS H13 is a hot work tool steel with versatility. It has hot strength, toughness, and thermal fatigue resistance. This datasheet supersedes Alloy Digest TS-688, April 2010. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-708. Producer or source: Latrobe Specialty Steel Company.

Pyromet CTX-1 is a high-strength, precipitation-hardenable superalloy exhibiting a low coefficient of thermal expansion and high strength up to about 1200 deg F. The alloy possesses high hot hardness and good thermal fatigue resistance. Its applications include components for gas turbine engines, hot-work die applications and high-pressure hydrogen environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-56. Producer or source: Carpenter. Originally published February 1976, revised May 1997.

PYROMET ALLOY CTX-909 exhibits a low and relatively constant thermal coefficient of expansion over a broad temperature range, high hot hardness and good thermal fatigue resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-89. Producer or source: Carpenter.

UNITEMP 188 provides outstanding oxidation and corrosion resistance, high strength at elevated temperatures, excellent creep and stress-rupture properties and thermal fatigue resistance. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-80. Producer or source: Cytemp Specialty Steel Division, Cyclops. Originally published July 1983, revised October 1990.

Finkl DCF is a prehardened, single-melt modified H13. The alloy is resulfurized for ease of machining in the hardened condition. This eliminates the necessity of costly and time-consuming vacuum heat treating that normally has to be scheduled after machining. The thermal fatigue resistance is less than that of double-melted DC-Xtra, but DCF is ready for service as machined. It is supplied prehardened at a hardness of approximately 45 HRC. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TS-621. Producer or source: A. Finkl & Sons Company.

THERMO-SPAN ALLOY is a precipitation-hardenable superalloy with a low coefficient of expansion combined with tensile and stress-rupture strength. Thermal fatigue resistance is inherent. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming and heat treating. Filing Code: FE-105. Producer or source: Carpenter.

THYROTHERM 2799 is a maraging tool steel with extremely low heat treat distortion and high resistance to thermal shock and excellent weldability. The alloy also possesses resistance to heat checking a high work temperatures. This datasheet provides information on composition, physical properties, and hardness as well as creep and fatigue. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-511. Producer or source: Thyssen Specialty Steels Inc..

Thermak 17 is a high-temperature ferritic stainless steel alloy with oxidation resistance to 1093 deg C (2000 deg F). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1239. Producer or source: AK Steel Corporation.

Cleveland-Cliffs Thermak 17 is a ferritic stainless steel that is stabilized with both titanium and niobium. When given a high-temperature, final solution anneal, the alloy exhibits dramatic creep resistance. The dual stabilization prevents carbide sensitization exposure and makes the alloy thermally non-hardenable. Cleveland-Cliffs Thermak 17 is designed for demanding, hot-end automotive exhaust applications where intermediate or high chromium grades may not be sufficient or where down gauging for lightweighting is desired. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-1345. Producer or source: Cleveland-Cliffs Inc.

Finkl DC is a single-vacuum melted AISI H13 type material made by the vacuum arc degassing (VAD) process. The vanadium content of 1% in addition to a high chromium (Cr 5%) and molybdenum (Mo 1.4%) promotes hot strength and wear resistance. This datasheet provides information on composition. It also includes information on heat treating. Filing Code: TS-614. Producer or source: A. Finkl & Sons Company.

Deloro Stellite 25 is a cobalt-chromium-tungsten-nickel alloy. This tungsten strengthened cobalt-chromium alloy is the cast version of the wrought cobalt-base alloy L605. Deloro Stellite 25 is resistant to wear, galling, and corrosion and retains this resistance at high temperatures. Its exceptional wear resistance is due mainly to the unique inherent characteristics of the hard carbide phase dispersed in a CoCr alloy matrix. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as machining. Filing Code: Co-142. Producer or source: Deloro Wear Solutions GmbH.

RA85H is a fully austenitic heat-resistant alloy modified with silicon for resistance to carburization. An addition of aluminum confers good oxidation resistance and improves resistance to sulfidation. The fine grain size of this alloy in the solution annealed condition provides unusual resistance to thermal fatigue in applications where it is subjected to quenching. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-492. Producer or source: Rolled Alloys Inc..

ALLOY 713LC is a nickel-base alloy possessing high stress-rupture strength up to 1700 F combined with excellent resistance to thermal fatigue. It is recommended for turbine wheels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-118. Producer or source: Austenal Microcast Division, Howmet Corporation.

PYROMET CTX-3 is a high-strength precipitation-hardenable low-expansion superalloy. It exhibits a low coefficient of thermal expansion over a broad temperature range combined with high strength. The alloy possesses high hot hardness and good resistance to thermal fatigue. It is brazable, weldable and can be plated with chromium. CTX-3 uses comprise compressor and exhaust casings, seals and other components for gas turbine engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-78. Producer or source: Carpenter.

IN-738 is a vacuum cast, precipitation hardened, nickel-base alloy possessing excellent high temperature creep-rupture strength combined with hot corrosion resistance superior to that of many present day high-strength superalloys of lower chromium content. This datasheet provides information on composition, physical properties, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-172. Producer or source: Licensees of International Nickel.

Inconel alloy MA 754 is an oxide-dispersion-strengthened nickel-chromium alloy produced by mechanical alloying. It offers the advantages of a wrought high-temperature material in service environments where only cast alloys could be used in the past. Its strength in conjunction with its high melting point and microstructural stability makes it an attractive alloy for extreme service applications. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: Ni-244. Producer or source: Inco Alloys International Inc.. Originally published May 1977, revised March 1990.

MO-RE 10 is a fully austenitic, heat-resistant cast alloy with good creep-rupture properties. Typical applications include pyrolysis and reformer tubing. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting. Filing Code: SS-731. Producer or source: Duraloy Technologies Inc.

CPM Nu-Die EZ is a die and mold steel designed for service as die casting dies and plastic injection molds. It is supplied in the prehardened condition and is easily machined using conventional chip-making methods. This datasheet provides information on composition, physical properties, microstructure, and elasticity as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-564. Producer or source: Crucible Specialty Metals Division, Colt Industries.

Centralloy H101 Micro is a cast austenitic stainless alloy with very good high temperature properties. The alloy has carbides in a uniform dispersion that impedes dislocation movement. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on casting, machining, and joining. Filing Code: SS-1148. Producer or source: Schmidt & Clemens Inc..

UCI-270 is a cast, cobalt and tungsten stabilized, nickel-chromium-iron alloy having unequaled performance in high-temperature applications to 2300 F (1260 C). Among its many uses are components for heat-treating furnaces, cement kilns, petrochemical furnace tubes, and refining furnace tubes. This datasheet provides information on composition, physical properties, and hardness as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-696. Producer or source: Ultra-Cast Inc.