Search Results for tensile properties

Aubert and Duval PER72 (NiCr18Co15TiMoAI alloy) is a precipitation hardening, nickel-base superalloy. The alloy is solid solution strengthened by additions of chromium, cobalt, molybdenum, and tungsten, while additions of titanium and aluminum provide precipitation strengthening. Aubert & Duval PER72 combines high strength with metallurgical stability as demonstrated by excellent impact strength retention after long exposures at elevated temperatures. It also exhibits good oxidation resistance, as well as excellent resistance to sulfide corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on low temperature performance, high temperature performance, and corrosion resistance as well as forming and heat treating. Filing Code: Ni-787. Producer or source: Aubert & Duval S.A. (a member of the Eramet Group).

Cleveland-Cliffs 18 SR is a ferritic stainless steel that is especially valuable for applications requiring high-temperature scaling resistance. Its properties, under cyclic conditions, are superior to those of types 409, 430, 304, 309, and 310 stainless steels. In addition, it is more economical than many of the stainless steels that are intended for high temperature applications. Unlike many of the straight chromium alloys, Cleveland-Cliffs 18 SR is readily welded by conventional methods. It is not subject to troublesome embrittlement or loss of corrosion resistance in the heat-affected zone. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low temperature performance, high temperature performance, and corrosion resistance as well as forming and joining. Filing Code: SS-1367. Producer or source: Cleveland-Cliffs Inc.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

Austral Wright C26000 (70-30 Brass) is a copper-zinc alloy. It has the distinctive clear bright yellow color normally associated with brass. Austral Wright C26000 possesses an excellent combination of strength and ductility. This grade is the most widely available copper alloy in the sheet form. It is often used where its deep drawing qualities are needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-944. Producer or source: Austral Wright Metals.

VDM 40 B is an austenitic iron-nickel-chromium-silicon-lanthanum alloy that is suitable for heating elements. It is characterized by excellent oxidation resistance, high resistivity, good sag resistance, and superior mechanical properties at high temperatures in comparison to other heating element alloys. VDM 40 B is less expensive than 60Ni, the traditional material for heating elements. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance, corrosion resistance, and surface qualities as well as forming and heat treating. Filing Code: SS-1366. Producer or source: VDM Metals GmbH.

Timetal 230 is a binary alloy of titanium with 2.5% Cu to produce a cold-formable medium-strength alloy that can be used up to 350 deg C (660 deg F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on forming and heat treating. Filing Code: TI-144. Producer or source: Timet.

Timetal 54M has better machinability than TI-6Al-4V with comparable properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and machining. Filing Code: TI-146. Producer or source: Timet.

COLUMBIUM ALLOY SU-31 is a columbium-base alloy designed to operate at temperatures up to 1300 C (2372 F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cb-18. Producer or source: Kawecki Berylco Industries Inc..

Elektron 675 is an extrusion alloy designed for high strength to 250 deg C (482 deg F). This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Mg-81. Producer or source: Magnesium Elektron Wrought Products, North America.

UNS No. A02060 is an aluminum-mold casting alloy that responds to an age-hardening heat treatment. It is recommended for applications that require a combination of high tensile properties and good machinability. Among its many uses are fuel pump bodies, aircraft fittings and seat frames for railway passenger cars. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-285. Producer or source: Various aluminum companies.

Ti-3A1-2.5V is a near-alpha titanium alloy offering 20-50% higher tensile properties than the strongest commercially pure grade of titanium at both room and elevated temperatures. Normally furnished in the annealed, or in the cold-worked stress-relieved condition, Ti-3A1-2.5V titanium alloy features excellent cold formability and good notch tensile properties, as well as corrosion resistance in many environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-95. Producer or source: Titanium alloy mills.

Ancorloy 2 and Ancorloy 4 are binder-treated premixed powder materials. They meet the chemical composition limits for the MPIF Material Standard 35 for Material Designations FD-02XX and FD-04XX, respectively. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on powder metal forms. Filing Code: SA-671. Producer or source: Hoeganaes Corporation.

Elektron WE43 was developed by Magnesium Elektron for use to 300 deg C and has good mechanical properties at these temperatures. The alloy is used in military and motorsport applications where these properties are at a premium. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: MG-76. Producer or source: Magnesium Elektron Wrought Products, North America.

Alcoa 351 SupraCast is a heat-treatable aluminum-silicon-copper alloy that also contains small amounts of magnesium, manganese, vanadium, and zirconium. It is designed for components exposed to elevated temperatures in high performance engines. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: Al-466. Producer or source: Alcoa Corporation.

Atlas 316 is a chromium-nickel-molybdenum austenitic stainless steel, second only to Atlas 304 in commercial importance. The molybdenum gives Atlas 316 better overall corrosion resistant properties than type 304 austenitic stainless steel, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed, welded, soldered, and cut by both thermal and mechanical methods. The austenitic structure gives excellent toughness, even down to cryogenic temperatures. Atlas 316L, the low carbon version of Atlas 316, is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components; about 5 mm, 0.2 in., and over. Atlas 316H, with its higher carbon content, has some application at elevated temperatures, as does stabilized type 316Ti. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1365. Producer or source: Atlas Steels.

Mecasteel 145 is a steel grade delivered in prehardened condition (yield strength > 1000 MPa, or > 145 ksi) and available in very large dimensions (width 2 m, or 78 in.; thickness up to 635 mm, or 25 in.). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-703. Producer or source: Industeel USA, LLC. Originally published as Alloy Digest SA-691, February 2014, revised July 2014.

Zr-3Nb-1Sn was developed to provide improved elevated temperature mechanical properties over the Zircaloys without reducing corrosion resistance. It is used in nuclear applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-6. Producer or source: Teledyne Wah Chang Albany.

ELEKTRON 21 has been developed to offer improved properties and superior corrosion resistance while maintaining the processing advantages of the Mg-Zn-rare earth alloys. The alloy is used in military and motorsport applications where these properties are at a premium. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: MG-75. Producer or source: Magnesium Elektron Wrought Products, North America.

ALUMINUM 220 is a 10% magnesium-aluminum casting alloy having the highest combination of mechanical properties, corrosion resistance and machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-112. Producer or source: Aluminum Company of America.

Alcan 2056 clad alloy is an Al-Cu-Mg-Zn alloy, designed to improve assembly corrosion resistance, while exhibiting a good balance of tensile properties and high damage tolerance properties.This data sheet covers Alcan 2056 as clad sheet. Tempers are presented that show improvement over the 2024 alloy. This datasheet provides information on tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-404. Producer or source: Alcan Inc.