MAGNIFER 75 is a soft magnetic nickel-iron alloy containing about 5% copper and 2% chromium. It offers very high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound toroids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-294. Producer or source: Vereingte Deutsche Metallwerke AG.

Carpenter Hy-Ra 80 is a nickel-iron-molybdenum alloy specially processed to exhibit square hystereris loop properties. It is recommended for tape wound toroids which will show specific magnetic characteristics after hydrogen annealing. This datasheet provides information on composition and physical properties. It also includes information on heat treating. Filing Code: Ni-158. Producer or source: Carpenter.

MAGNIFER 7904 is a soft magnetic nickel-iron alloy containing about 5% molybdenum. It offers extremely high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound troids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-291. Producer or source: Vereingte Deutsche Metallwerke AG. Originally published September 1983, revised February 1984.

Carpenter HYMU 80 is an unoriented 80% nickel-iron-molybdenum alloy which offers extremely high initial permeability and maximum permeability with minimum hysteresis loss at low magnetic field strengths. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-5. Producer or source: Carpenter Technology Corporation. Originally published May 1953, revised October 1971.

Magnifer 53 is a soft-magnetic nickel-iron alloy with approximately 55% nickel. It is notable for its high saturation induction of 1.5 T and high initial permeability. This datasheet provides information on composition and physical properties. Filing Code: Ni-514. Producer or source: VDM Technologies Corporation.

METGLAS Alloy 2826 (Fe40Ni40P14B6) is a ferromagnetic, high permeability, nickel-iron metallic glass which, when appropriately annealed, yields a material similar to the higher nickel containing permalloys in magnetic properties. Alloy 2826 is a single phase, opaque metallic material with a glass-like structure obtained by a very rapid quench from the liquid state. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on forming and heat treating. Filing Code: Ni-235. Producer or source: Allied Chemical Corporation.

MAGNIFER 50 is a soft magnetic iron-nickel alloy containing about 48% nickel. It has a saturation induction of 1.55T and a high permeability. It exhibits the highest saturation induction obtainable with iron-nickel alloys. Typical applications are (1) Low-frequency power transducers, (2) Chokes (Coils), (3) Relay parts and (4) Integrating current transformers for Fi-protective switches. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-70. Producer or source: VDM Technologies Corporation.

Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm 2 /m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

Magnifier 36 is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 0.75 ohm mm 2 /m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-111. Producer or source: VDM Technologies Corporation.