Strenx 700 CR is a cold-rolled structural steel with a minimum yield strength of 700 MPa (102 ksi) used to produce stronger and lighter structures. Strenx 700 CR has good cold forming, welding, and cutting performance. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on surface qualities as well as joining. Filing Code: SA-819. Producer or source: SSAB Swedish Steel Inc..

GearMet C69 possesses surface properties superior to those of conventional gear steels with the advantage of a flaw tolerant core. These surface properties allow either higher contact stresses at an equivalent life, thus reducing the gear size, or significantly longer wear life at the same contact stress when compared to existing carburized gear steels. This datasheet provides information on composition and hardness as well as fatigue. It also includes information on wear resistance as well as heat treating. Filing Code: SA-500. Producer or source: QuesTek Innovations, LLC.

Strenx 700 MC PLUS is a hot-rolled structural steel made for cold forming, with minimum yield strength of 700 MPa (102 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S700MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities. Filing Code: SA-817. Producer or source: SSAB Swedish Steel Inc..

Ferrium CS62 is a stainless steel targeted to match the surface properties of standard nonstainless gear steels, while maintaining superior core strength, toughness, and corrosion resistance to 440C steel. This datasheet provides information on composition as well as fatigue. It also includes information on corrosion resistance as well as heat treating. Filing Code: SS-741. Producer or source: QuesTek Innovations, LLC.

Docol 1000 DPZE is a high-strength steel with a microstructure that contains ferrite, which contributes to good formability, and martensite, which is hard and contributes to the strength of the material. These steels are designed according to their lowest tensile strength. DP stands for dual phase and the ZE suffix denotes a zinc coating. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on surface qualities as well as forming. Filing Code: SA-715. Producer or source: SSAB Swedish Steel Inc..

Strenx 1300 is a very high-strength structural steel with a minimum yield strength of 1300 MPa (189 ksi). Typical applications include load-carrying structures that place very high demands on low weight. S5188 This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming. Filing Code: SA-783. Producer or source: SSAB Swedish Steel Inc..

Colmonoy 455L is a nickel-base hard-surfacing composite powder for high abrasion and moderate impact resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on surface qualities as well as powder metal forms. Filing Code: Ni-670. Producer or source: Wall Colmonoy Corporation.

NITRODUR 8515 (31CrMo12, 1.8515) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500-550 deg C (932-1022 deg F). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting. Filing Code: SA-785. Producer or source: Schmolz + Bickenbach Group.

Armox 600T combines good ballistic properties with excellent toughness. Hardness for 600T is 570–640 HBW. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, heat treating, and joining. Filing Code: SA-683. Producer or source: SSAB Armox.

Strenx 900MC (minimum yield strength of 900 MPa, or 130 ksi) is one alloy in an extensive portfolio of high-strength, high performance structural steels. Strenx 900MC has good welding, cold forming, and cutting performance. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-766. Producer or source: SSAB Swedish Steel Inc..

Strenx 960MC is a hot-rolled structural steel made for cold forming, with minimum yield strength of 960 MPa (139 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S960MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-772. Producer or source: SSAB Swedish Steel Inc..

NITRODUR 8507 (34CrAlMo5-10) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition and tensile properties. It also includes information on surface qualities as well as casting and forming. Filing Code: SA-797. Producer or source: Schmolz + Bickenbach Group.

Strenx 700 is a high-strength structural steel with a minimum yield strength of 650–700 MPa (94–102 ksi) depending on thickness. Strenx 700 meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-779. Producer or source: SSAB Swedish Steel Inc..

Strenx 1100 MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 1100 MPa (160 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S1100 MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-773. Producer or source: SSAB Swedish Steel Inc..

NITRODUR 8550 (34CrAlNi7-10, 1.8550) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting and forming. Filing Code: SA-791. Producer or source: Schmolz + Bickenbach Group.

NITRODUR 8599 (41CrAlMo7-10) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting and forming. Filing Code: SA-795. Producer or source: Schmolz + Bickenbach Group.

NITRODUR 8523 (40CrMoV13-9, 1.8523) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting. Filing Code: SA-806. Producer or source: Schmolz + Bickenbach Group.

NITRODUR 8519 (31CrMoV9, 1.8519) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on surface qualities as well as casting and forming. Filing Code: SA-787. Producer or source: Schmolz + Bickenbach Group.

SSAB Ramor 400 is a low-carbon, chromium-molybdenum-nickel-boron alloy protection steel that is used in the heat treated condition (Hardness = 360–460 HBW) for blast protection. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, machining, and joining. Filing Code: SA-876. Producer or source: SSAB AB.

Dogal 300 LAD, 340 LAD, 380 LAD, 420 LAD, 460 LAD and 500 LAD are high-strength low alloyed steels intended for pressing. The designation in the name is the guaranteed minimum yield strength. Dogal steels can be zinc coated. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on surface qualities as well as forming, heat treating, joining, and surface treatment. Filing Code: CS-167. Producer or source: SSAB Swedish Steel Inc..