Sandvik Ti-3Al-2.5V Grade 9 titanium-aluminum alloy offers excellent corrosion resistance, especially to chloride media, and has a high strength-to-weight ratio, which is especially suitable for use in aerospace applications. Tubing can be produced having a CSR (contractile strain ratio) that enhances the fatigue endurance limit. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: TI-109. Producer or source: Sandvik.

CABOT Ti-3A1-2.5V alloy is both lightweight and strong. It has a high strength-to-weight ratio which provides a major design advantage saving weight. It can be formed readily and it has good weldability. Seamless tubing of CABOT Ti-3A1-2.5V was developed for aircraft hydraulic and fuel systems and its performance has been proved by use in various types of aircraft and aerospace vehicles. CABOT Ti-3A1-2.5V is available as plate, sheet and seamless tubing and pipe. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-85. Producer or source: Cabot Wrought Products.

RMI 6A1-6V-2Sn is an alpha-beta titanium alloy that provides a tensile strength of 150,000 psi in the mill-annealed condition in section sizes up to 2 inches. It offers good corrosion resistance in applications requiring high strength-to-weight ratios at temperatures up to 750 F. Among its uses are rocket engine cases and ordnance components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-79. Producer or source: RMI Company.

RMI 8Mn is an alpha-beta titanium alloy that provides a guaranteed room-temperature minimum tensile strength of 120,000 psi in the mill-annealed condition. This alloy offers good formability and excellent resistance to corrosion in applications requiring high strength-to-weight ratios at temperatures up to 700 F. Its uses include aircraft sheet components and structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-82. Producer or source: RMI Company.

FANSTEEL 291 METAL is a columbium-base alloy that can be readily fabricated, machined and welded. It is used in the high-temperature range 2800-3500 F where excellent strength-to-weight ratio can be used to advantage. It is also used in the lower temperature range 2000-2700 F because of its availability and fabricability which may be of more importance than high strength alone. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cb-20. Producer or source: Fansteel Metallurgical Corporation.

G-E ALLOY J-1300 is a precipitation hardening iron-base alloy with an excellent strength to weight ratio. It is recommended for applications in the 1350 F. range. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-83. Producer or source: General Electric Company.

CARPENTER TITANIUM 6-6-2 is an alpha-beta titanium alloy offering good corrosion resistance in applications requiring high strength-to-weight ratios to 750 F (400 C). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-61. Producer or source: Carpenter.

TIMETAL 65A is a general purpose grade of commercially pure titanium that has excellent corrosion resistance to highly oxidating to mildly reducing environments, including chlorides, and an excellent strength-to-weight ratio. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TI-147. Producer or source: Timet.

Tungum alloy combines an unusually high strength-to-weight ratio, with ductility, excellent corrosion resistance, and good fatigue properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Cu-806. Producer or source: Tungum Ltd.

Allegheny Ludlum CP chemically pure titanium alloys feature low density and high strength-to-weight ratio. They are suitable for many corrosive chemical environments, including oxidizing chloride solutions, seawater, and chlorine-based bleaches. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming and joining. Filing Code: TI-115. Producer or source: Allegheny Ludlum Corporation. Originally published September 2000, corrected November 2000.

Haynes Ti-3Al-2.5V alloy is used where the strength/weight ratio is of prime importance; the alloy is 43% lighter than 21-6-9 stainless steel. It is most often used in the form of seamless tubing for aircraft hydraulic systems. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TI-145. Producer or source: Haynes International Inc.

STELCOLOY is a low-carbon, low alloy steel having superior strength and elastic properties and better atmospheric corrosion resistance than plain carbon steels of similar carbon content. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-47. Producer or source: The Steel Company of Canada Ltd.

AlcoTec weld filler wire 4145 is a general-purpose high-silicon-containing wire for both welding and brazing. The alloy is often used instead of 2319 for welding higher-strength alloys because of its low melting temperature and high fluidity. This datasheet provides information on composition and physical properties. It also includes information on joining. Filing Code: AL-383. Producer or source: AlcoTec Wire Corporation.

ALUMINUM 2024 is a high-strength wrought alloy that responds readily to an age-hardening heat treatment. It is recommended for applications requiring highly favorable strength-weight ratios. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, and machining. Filing Code: Al-23. Producer or source: Various aluminum companies. Originally published February 1955, revised August 1973.

Crucible 422 has a structure of tempered martensite to give the alloy high strength. It is useful in the aerospace industry for structurals with high strength/weight ratios. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1004. Producer or source: Crucible Service Centers.

Donegal DC-50 is a precipitation hardening stainless steel having high strength-weight ratio. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-17. Producer or source: Donegal Manufacturing Corporation.

ATI 6-4 is an alpha-beta, Ti-6Al-4V alloy that is used in the annealed condition, or in the solution heat treated and aged condition. This high-strength alloy can be used at cryogenic temperatures up to about 425 °C (800 °F). Ti-6Al-4V is the most widely used titanium alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-171. Producer or source: ATI.

AncorTi is a gas atomized spherical titanium powder for applications in additive manufacturing. The data sheet covers both commercial pure titanium and Ti6Al4V. This datasheet provides information on composition. Filing Code: Ti-160. Producer or source: Hoeganaes Corporation.

MAXI-FORM 80 is a high-strength low-alloy steel that provides superior ductility, good fatigue resistance, good weldability and outstanding impact toughness even at temperatures down to -40 F and below. It has a yield strength of 80,000 psi along with the high formability that complex parts require. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-312. Producer or source: Republic Steel Corporation.

Magnesium ZK61A is a heat treatable sand casting alloy offering higher strength properties for room-temperature applications than other magnesium casting alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-67. Producer or source: The Dow Chemical Company.