1-20 of 88 Search Results for

storage tanks

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1971) 20 (7): CS-42.
Published: 01 July 1971
... BETHLEHEM RQC-60 is a heat-treated carbon steel having up to 60,000 psi yield strength in combination with good notch toughness and excellent weldability. It is engineered specifically for pressure vessels, storage tanks, and structures where low-temperature service is required. This datasheet...
Journal Articles
Alloy Digest (1978) 27 (10): Al-33.
Published: 01 October 1978
... ALUMINUM 5083 is a non-heat-treatable wrought aluminum alloy possessing high strength, excellent welding characteristics and excellent resistance to corrosion. Among its many applications are structural towers, mobile cranes and chemical storage tanks. This datasheet provides information...
Journal Articles
Alloy Digest (1964) 13 (8): CS-21.
Published: 01 August 1964
... JLX-W is a columbium-bearing carbon steel produced in four grades according to the minimum yield point. It has good forming characteristics and excellent weldability. It is recommended where high strength and weight saving are required, such as freight cars, trucks, storage tanks, etc...
Journal Articles
Alloy Digest (1982) 31 (5): SS-408.
Published: 01 May 1982
...-temperature scaling. Its many uses include architectural trim, nitric acid storage tanks and kitchen appliances. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high...
Journal Articles
Alloy Digest (2013) 62 (3): SA-673.
Published: 01 March 2013
... 10028-4 X7Ni9 (1.5663) or X8Ni + QT680 (1.5662) ASTM/ASME A/SA 553 Type 1 J15 G3127 SL9N590Q General Characteristics: This alloy is an alloyed steel grade containing 9% nickel intended for the fabrication of Liquefied Natural Gas (LNG) storage tanks and welded pressure vessels designed for extra low...
Journal Articles
Alloy Digest (1968) 17 (7): SA-228.
Published: 01 July 1968
... CREUSOT-9D6 is a weldable 9% nickel steel recommended for low temperature applications such as storage and transportation tanks, liquified gas equipment, and cryogenic structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties...
Journal Articles
Alloy Digest (1992) 41 (6): P-35.
Published: 01 June 1992
... applications where good corrosion resistance and some ignition resistance is useful Applications include absorption towers, storage tanks, piping and exhaust stacks. Producer: Dow Chemical USA Dow Plastics Group Midland, Minnesota 48674 Phone: 80044 14369 ...
Journal Articles
Alloy Digest (2011) 60 (9): Fe-155.
Published: 01 September 2011
... patterns are not required, making this alloy an easy metal to work with. This alloy has a high ductility at extremely low temperatures and is particularly good for welding. Given these properties, this alloy is used in liquefied natural gas ships, membrane material for land container tanks, and a variety...
Journal Articles
Alloy Digest (1979) 28 (9): Al-157.
Published: 01 September 1979
... cracking in service nor in laboratory tests. Typical storage and tank car applications include high-strength hydrogen peroxide, gasoline, refined petroleum products, ammonium nitrate, urea and tricresyl phosphate. Specification Equivalents: ASTM: B209andB241. ANSI: H38.2 and H38.7. General Characteristics...
Journal Articles
Alloy Digest (1958) 7 (3): Al-64.
Published: 01 March 1958
... satisfac- torily by either process. Corrosion Resistance: Ahoy 5154 exhibits the same good resistance to cor- rosion as alloys 1100, 3003, 5052 and 6061, and provides inaeased strength in welded construction. Typical storage and tank car applications indude high strength hydrogen peroxide, fuming nitric...
Journal Articles
Alloy Digest (2016) 65 (1): SS-1237.
Published: 01 January 2016
..., and strip. See size availability in Fig. 5. Applications: NSSMC-NAR-SN-1: Nitric acid manufacturing equipment, 98% nitric acid storage tanks, shipping containers, and mixed acid (nitric acid sulfuric acid) tanks NSSMC-NAR-SN-5: Concentrated nitric acid heat exchangers NSSMC-NAR-SN-5: Medium...
Journal Articles
Alloy Digest (2007) 56 (10): SS-1000.
Published: 01 October 2007
..., sheet, and strip product forms and is listed in ASTM A 240. Applications: Typical applications include liquefied gas storage vessels and portable gas storage tanks. This alloy is also suited for many ambient temperature structural applications such as railroad freight cars, truck trailers, coal handling...
Journal Articles
Alloy Digest (2006) 55 (3): SS-955.
Published: 01 March 2006
..., and fabricating characteristics. These properties make the material an excellent choice for applications such as tubing and sheet for bus frames, coal hopper cars, street sweepers, chutes, storage tanks, ISO shipping container frames, and other equipment requiring low life-cycle costs. # AK Steel 41003...
Journal Articles
Alloy Digest (1953) 2 (5): Cu-8.
Published: 01 May 1953
... pins, forgings, iurdwm, kettles, lock washus. range boilers. springs, tanks. marine fittings, and welding wire; also welded tanks, u&red pressure VSS&, gasoline tanks, pipe, and oil storage tanks. Manmfachrer: The American Brass Company Waterbury 20, Cortnectkut ...
Journal Articles
Alloy Digest (1984) 33 (9): SS-451.
Published: 01 September 1984
.... Annealed bars were cold worked and tested without stress relieving or straightening. Forms Available: Billets. bar. rod. sheet and plate Applications: Typical applications of CRllClBLE 442 comprise decorative trim. nitric acid storage tanks and tank cars. nitrogen fixationequipment and nozzles for zinc die...
Journal Articles
Alloy Digest (2010) 59 (5): SS-1064.
Published: 01 May 2010
... A manufacturing plants, carbon black manufacturing plants. Pulp and paper mills: bleaching devices, scrubbers Medical and pharmaceutical product plants: soy sauce fermentation tanks, salty mirin tanks, dressing production equipment. Salt production lines: Concentrated salt storage tanks, heated cans, evaporators...
Journal Articles
Alloy Digest (1991) 40 (5): Al-316.
Published: 01 May 1991
...-strength welded structures, pressure vessels, ma- rine applications, storage tanks Producer: Most aluminum alloy mills. ...
Journal Articles
Alloy Digest (2012) 61 (11): SA-666.
Published: 01 November 2012
... < t 3.0) 0.47 0.49 0.31 0.24 Auxiliary data 20 mm 60 mm C 0.08 0.08 CEV1 0.43 0.44 CEV 2 0.44 0.45 CET 0.28 0.28 Pcm 0.21 0.21 (a) CEV1 = C + Mn/6 + Si/24 + Ni/40 + Cr/5 + Mo/4 + V/14, (b) CEV2 = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15, (c) CET = C + (Mn + Mo)/10 + (Cr + Cu)/20 + Ni/40, (d) Pcm = C + Si/30 + (Mn + Cu + Cr)/20 + Ni/60 + Mo/15 + V/10 + 5B DOI: 10.31399/asm.ad.sa0666 General Characteristics: Dillimax 500 ML is a thermomechanically rolled, fine-grained structural steel. It is characterized by high toughness and strength combined with a lean chemistry. Due to it chemical composition, this material has a low carbon equivalent and hence excellent fabrication properties, particularly weldability. Product Forms Available: Designation and Range of Application. Dillimax 500 ML is usually delivered with minimum tested impacted values at 50 ºC. Other testing temperatures can be agreed upon request. The alloy can be delivered in thickness from 10 to 75 mm (0.4 to 3.0 in.) in accordance with the producer s dimensional program for TMCP rolled steel. Other thicknesses are possible upon request. Delivery Condition. Thermomechanical rolling leading to the delivery condition M can include processes with an increasing cooling rate or without tempering, including self-tempering but excluding direct quenching and quenching and tempering. Testing. Tensile and impact tests will be performed, once per heat and 40 t. The specimens for the tensile are prepared according to EN 10025-6. Testing is carried out on specimens of gauge length 10 = 5.65 S0 or 10 = 5d0, in accordance with EN 10002-1. Tensile tests according to ASTM A370 may be agreed upon. The impact test will be carried out on Charpy-V-specimens in accordance with EN 10045-1 at a temperature of 50 ºC ( 58 ºF). Unless otherwise agreed, the test will be performed at the lowest temperature of the corresponding quality on transverse test specimens taken as follows: For plate thickness 40 mm (1.6 in close to the surface For plate thickness > 40 mm (1.6 in ¼ of the plate thickness Applications: Preferentially used by customers for sophisticated design in constructional steelwork, hydraulic steelwork, mechanical engineering, offshore constructions, and storage tanks or spheres. Producer: Dillinger Hütte GTS D-70043 Stuttgart Tel: +49 6831...
Journal Articles
Alloy Digest (2014) 63 (12): SA-714.
Published: 01 December 2014
... < t 5.5) 320 (46) 430 590 (62 86) Tensile test at ambient temperature transverse test specimens DOI: 10.31399/asm.ad.sa0714 range should be sought. Other PWHT conditions can be agreed upon by inquiry. For flame straightening, special working recommendations have to be taken into account (contact the producer). Fabrication Properties: Processing. The recommendation in accordance with EN 1011 and SEW 088 should be observed. Cold Forming. This alloy generally can be well cold-formed with regard to its high toughness, i.e., formed at temperatures below 580 °C (1076 °F). Cold forming is always related to hardening of the steel and to a decrease in toughness. This change in the mechanical properties can, as a rule, be partially recovered through a subsequent stress relief heat treatment (see also Heat Treatment Flame-cut or sheared edges in the bending area should be ground before cold forming. Hot forming at temperatures above 580 °C (1076 °F) lead to changes in the original material condition. It is impossible to reestablish the same material properties that had been achieved during the original manufacture through a further treatment. Therefore, hot forming is not permitted. Weldability: DI-MC 355 has an excellent weldability if the general technical rules are observed (EN 1011 has to be applied analogously). The risk of cold cracking is low, so that preheating is often not necessary when welding. With greater plate thickness, omitting the preheating requires the use of filler materials and welding conditions that lead to a very low hydrogen transfer (up to 5 mL/100 g DM according to ISO 6390). The low content of carbon and other alloy elements leads to favorable toughness properties in the heat affected zone, even with high heat inputs. Heat Treatment. Welded joints of DI-MC 355 are usually used in welded condition. If a stress relief heat treatment is necessary, it is carried out in the temperature range 530 580 °C (986 1076 °F) with cooling in still air. The holding time should not exceed four hours (even if multiple operations are carried out). General Characteristics: DI-MC 355 is a thermomechanically rolled, fine-grained structure with minimum yield strength of 355 MPa (51 ksi) in its delivery condition ex-works (referring to the lowest thickness range). It fulfills the requirements of EN 10025-4 structural steel. It is characterized by high toughness and strength combined with a lean chemistry. Due to it chemical composition, this material has a low carbon equivalent and hence excellent fabrication properties, particularly weldability. Product Forms Available: Designation and Range of Application. DI-MC 355 can be delivered in two qualities as follows: Basic quality (B) with minimum impact values at 20 °C ( 4 °F): Material No. 1.8223-S355M in accordance with EN 10025-4 Low temperature quality (T) with minimum impact values at 50 °C ( 58 °F): Material No. 1.8834-S355ML in accordance with EN 10025-4 Di-MC 355 can be delivered in thickness from 8 140 mm (0.3 5.5 in.) according to the dimensional program (EN 10025-4 defines the properties only up to a thickness of 120 mm (4.7 in Testing. Tensile and impact tests will be performed, once per heat and 40 t. The specimens for the tensile test are prepared according to EN 10025-4. Testing is carried out on specimens of gage length Lo = 5.65 So or Lo = 5 do, in accordance with EN ISO 6892-1. Tensile tests according to ASTM A370 may be agreed upon. The impact test will be carried out on Charpy-V-specimens in accordance with EN ISO 148-1 using a 2 mm (0.08 in.) strike at a temperature of 20 °C ( 4 °F) for basic quality B and at 50 °C ( 58 °F) for low temperature quality T on longitudinal test pieces. Unless otherwise agreed, the test will be performed at the lowest temperature of the corresponding quality on transverse test specimens taken as follows: For plate thickness 40 mm ( 1.6 in close to the surface For plate thickness > 40 mm (> 1.6 in ¼ of the plate thickness Applications: Preferentially used by customers for sophisticated design in constructional steelwork, hydraulic steelwork, mechanical engineering, offshore constructions, storage tanks, or spheres. Producer: Dillinger Hütte GTS 66748 Dillingen/Saar, Germany Tel...
Journal Articles
Alloy Digest (1963) 12 (12): CS-20.
Published: 01 December 1963
... from 3/16 to 2 inches. Forms Available: Plates and heads Applications: Low temperature storage tanks. Manufacturer: Lukens Steel Company Coatesville, Pennsylvania ...