CRYOTECH 302 is a new, cryogenically processed stainless steel wire with the same composition as AISI Type 302. The cryogenic processing gives tensile and torsional properties that are independent of wire diameter (thus simplifying spring design calculations) and markedly greater than those of conventional stainless steels. Cryotech 302 has uniformly high properties: 290,000 psi tensile strength and 145,000 psi minimum torsional yield strength. Thus it provides greater design flexibility than conventional stainless steels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: SS-372. Producer or source: AL Tech Specialty Steel Corporation.

Sandvik Bioline 11R51 HV is the vacuum remelted version of the alloy required for higher cleanliness. This datasheet provides information on composition, physical properties, elasticity, and shear and bend strength It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1100. Producer or source: Sandvik Materials Technology.

Sandvik 2RK66 is recommended for springs that will operate in extremely corrosive conditions. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on low and high temperature performance as well as forming and heat treating. Filing Code: SS-992. Producer or source: Sandvik Steel Company.

Sandvik T302 HS is a general purpose austenitic stainless steel with respect to corrosion resistance only in a spring temper for higher strength. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on forming and heat treating. Filing Code: SS-1074. Producer or source: Sandvik Steel Company and Sandvik AB.

Sandvik 9RU10 is a precipitation hardening stainless steel with the highest relaxation resistance of all of the Sandvik wire grades. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on forming and heat treating. Filing Code: SS-1248. Producer or source: Sandvik Steel Company. Originally published July 2016, revised September 2016.

Sandvik 12R10L is fully austenitic with a very low cobalt content for nuclear applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength as well as fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: SS-1309. Producer or source: Sandvik Steel Company and Sandvik AB.

Sandvik 13RM19 combines high mechanical strength with a nonmagnetic structure. This combination of properties has previously been found mainly in Co-Ni-base or Cu-Be alloys. The steel has very good corrosion resistance comparable to that of AISI Type 302. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on low temperature performance as well as forming, heat treating, and joining. Filing Code: SS-935. Producer or source: Sandvik Steel Company.

Sandvik Sanicro 75X1 is a nickel-base age-hardenable spring wire. This datasheet provides information on composition, physical properties, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-627. Producer or source: Sandvik Steel Company.

Copper Alloy No. C69000 is a copper-zinc-aluminum-nickel alloy with a good combination of strength and ductility. Its capacity is excellent for hot work or cold work. It has fairly good resistance to general corrosion and stress-corrosion cracking; its corrosion resistance is superior to that of Copper Alloy No. C26000 (Cartridge brass or 70-30 brass). Among its many uses are wiring devices, springs and switches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-502. Producer or source: Copper and copper alloy mills.

DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

NITRONIC 32 is basically a low-nickel chromium-manganese austenitic stainless steel strengthened by an addition of nitrogen. It has annealed strength approximately two times that of AISI Type 304 stainless steel and comparable corrosion resistance. It is used in such applications as fasteners, springs, antennae, shafting and pole-line hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-320. Producer or source: Armco Steel Corporation, Advanced Materials Division.

TECH-TRONIC 32 stainless steel is essentially a low-nickel chromium-manganese austenitic iron-base alloy. In the annealed condition it provides about twice the yield strength of AISI Type 304 stainless steel and almost the same resistance to corrosion. It also offers improved wear and galling resistance over standard stainless steels. TECH-TRONIC 32 can be cold worked to high strength levels with retention of good ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-348. Producer or source: Techalloy Company Inc..

COPPER Alloy No. 770 is a spring quality copper-nickel zinc alloy having high resistance to corrosion. It is recommended primarily for optical goods, springs, resistance wire, hardware and similar products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-185. Producer or source: Copper and copper alloy mills.

CR 155 is a silver-copper to which magnesium and phosphorus have been added to deoxidize the copper and give a precipitation-strengthening copper (alloy) having great strength and resistance to heat without an equipment loss in electrical conductivity. It is readily formable and can meet a large number of design requirements because it can be altered easily through cold working and heat treating (annealing) to develop a wide range of properties. Its many uses include electrical springs and contacts, radiator fins, tinsel wire in telecommunications and high-strength hook-up wire in aircraft. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-472. Producer or source: Copper Range Company.

RIVERSIDE No. 4 is a spring quality nickel silver alloy having high resistance to corrosion and tarnish. It is used primarily for springs and electrical resistances. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-76. Producer or source: H. K. Porter Company Inc..

AMBRONZE 430 is a copper-zinc-tin alloy with excellent to good corrosion resistance in most environments. It has good mechanical properties and can be cold worked readily by conventional processes. Its many applications include springs, weather strip, sash chains and platers' bars and cores. AMBRONZE 430 is one of the least expensive of the fine spring alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Cu-431. Producer or source: Anaconda American Brass Company.

AL 17-7 alloy, a precipitation hardening stainless steel, has moderate corrosion resistant characteristics and develops high strenth in the precipitation hardened condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-528. Producer or source: Allegheny Ludlum Corporation.

AISI 1086 is a high-carbon water of oil-hardening steel of low hardenability. It is used for music wire, tools springs, machinery parts and many other applications. It develops high surface hardness on quenching and tempering lightly and has good wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-57. Producer or source: Carbon steel mills.

UNS No. G10860 is a high-carbon oil or water-hardening steel of low hardenability. It develops high surface hardness on quenching rapidly and tempering lightly and it has good resistance to wear. It is used for tools, springs, music wire, machinery parts and many other applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-112. Producer or source: Carbon steel mills.

CMW 100 is a copper alloy that combines high tensile strength with high electrical and thermal conductivity. It responds to age-hardening heat treatment. It is used for flash welding dies, springs, electrical components, high-strength backing material for brazed assemblies, and wire guides. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-29. Producer or source: CMW Inc. Originally published as Mallory 100, August 1955, revised October 2000.