Search Results for solderability

LEAD-BASE SOLDER comprises a family of alloys, usually lead-tin alloys, with or without the addition of antimony, although there are other types including those containing silver. They are widely used in industrial applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance. Filing Code: Pb-8. Producer or source: Most lead producers.

INDALLOY No. 7 is a solder (50% indium-50% lead) that drastically reduces gold scavenging when used to solder components to gold-coated substrates in place of conventional (63% tin-37% lead) solder. Thus it has had obvious applications in the hybrid microelectronics industry. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: In-2. Producer or source: Indium Corporation of America.

Indalloy 227 is a lead-free solder developed to replace common tin-lead eutectic solder used in electronics soldering applications. Comparisons are given in this data sheet between Indalloy 227 and 63Sn37Pb, the composition of the alloy that Indalloy 227 was designed to replace. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on joining. Filing Code: SN-13. Producer or source: Indium Corporation of America.

MUFLLER Alloy 6730 is a medium-leaded copper-base alloy with good machinability. It can be used with hard or soft mating members where moderate strength is sufficient. It can be joined successfully by soft soldering or silver soldering. Among its many uses are bearings, bushings, connecting rods and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-486. Producer or source: Mueller Brass Company.

MUELLER Alloy 6680 is a non-leaded copper-base alloy (manganese bronze) with relatively good ductility and fair machinability. It can be used with soft or hard mating members where moderate strength is sufficient. It can be joined successfully by silver soldering or soft soldering. Its many uses include bearings, gears, pump parts, connecting rods, marine hardware and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-491. Producer or source: Mueller Brass Company.

CDA ALLOY 725 (Now known as CDA ALLOY C72500) is a copper-nickel-tin alloy designed to improve the reliability of electrical connectors by resisting oxidation and thus providing improved solderability. It has a pleasant silver color and excellent joinability by soldering, brazing and spot and butt resistance welding. Its uses include electrical connectors, relay and switch springs, and builders' hardware. The revision is being made to correct an error in composition and for general updating. The original name (CDA ALLOY 725) is being retained because of the correction in composition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-229. Producer or source: Copper and copper alloy mills. Originally published March 1971, revised July 1985.

Copper Alloy No. C67300 is a copper-manganese-silicon-lead alloy with good machinability. It is used against hard or soft mating surfaces. It can be joined readily by soft soldering or silver soldering. It has excellent mechanical and wear properties and good resistance to corrosion. Among its many applications are bearings, bushings, connecting rods, pump parts, gears, cams and seal rings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-514. Producer or source: Copper and copper alloy mills.

KORLOY 2570 and 2573 are zinc-base alloys possessing superior strength and good low-temperature impact properties down to -60 F. They are easily forged, extruded and machined for wrought applications and alloy 2570 can be used in the cast condition. They have excellent bearing properties and can be joined with adhesives, torch welding techniques, and solders compatible with aluminum alloy surfaces. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-16. Producer or source: Cominco Ltd.

TIN is used as a coating on steel and on other metals and alloys. When alloyed with other metals, it is an important constituent in soft solders, collapsible tubes, pewter ware, costume jewelry, fusable pressure plugs, bronze and bearing linings. It has a long and varied history of commercial and ornamental uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Sn-5. Producer or source: World tin producers (ingots).

Copper No. 142 is an arsenical copper deoxidized with phosphorus. Its capacity is excellent for hot forming or cold working and it has excellent joinability characteristics for soldering, brazing and gas-shielded arc welding. Its leading use is tubing for condensers and heat exchangers. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-284. Producer or source: Copper and copper alloy mills.

Microzinc Alloy 700 is a zinc-copper-titanium alloy with good creep strength, good ductility, low thermal expansion, good solderability, and good electrical conductivity. Processing differences give two commercial products or classes designated 701 and 702. This alloy is corrosion resistant and does not stain other materials. Its uses include architectural components and roofing systems. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-24. Producer or source: Ball Corporation, Metal and Chemical Division.

MICROZINC Alloy 100 is a zinc-lead-cadmium alloy having good ductility with adequate strength, good resistance to corrosion, and a low coefficient of sliding friction. It is solderable and non-magnetic. Processing differences give three commercial products or classes designated= 101, 102 and 103. This alloy does not stain other materials. Its many uses include jewelry, coins and battery cans. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-27. Producer or source: Ball Corporation, Metal and Chemical Division.

KME Cu-PHC is a phosphorus-deoxidized copper that contains a minimum of 99.95% copper and low residual phosphorus. It has very high thermal and electrical conductivity, and good welding and soldering properties. The electrical conductivity of KME Cu-PHC is higher than that of Cu-HCP. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-937. Producer or source: KME Germany GmbH.

Aurubis CuZn0.5 is a copper alloy deoxidized by the addition of zinc. It has good electrical conductivity (≥ 82% IACS), and higher strength as compared to pure copper. This alloy has very good welding and soldering properties because it is largely insensitive to hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-938. Producer or source: Aurubis AG.

Aurubis CuFe0.1P is a low-alloyed, age hardened copper alloy. It combines very high electrical conductivity (≥ 84% IACS) and thermal conductivity with relatively high strength. The alloy has improved temperature resistance as well as good relaxation properties and is suited for welding and soldering. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance. Filing Code: Cu-942. Producer or source: Aurubis AG.

SIL-FOS is a self-fluxing silver solder recommended for brazing copper. With the application of Handy Flux it is also used on the brasses and bronzes. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as joining. Filing Code: Cu-30. Producer or source: Handy & Harman.

ASARCOLO 158 and 255 are eutectic alloys that are easily melted. Each number indicates a eutectic with a single melting point; thus ASARCOLO 158 has a melting point of 158 F and ASARCOLO 255 melts at 255 F. These alloys have a wide range of uses in aiding foundry and machine-shop practice, for bending thin sections, anchoring components, spotting fixtures, transferring heat, soldering and sealing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: Bi-1. Producer or source: Federated Metals Corporation, ASARCO Inc..

ASARCOLO 158-190 and 217-440 are non-eutectic alloys that can be melted easily. Each range indicates the range through which the alloy melts; thus ASARCOLO 158-190 is a non-eutectic alloy that has a melting range from 158 F to 190 F and ASARCOLO 217-440 is another non-eutectic alloy that melts in the range 217 F to 440 F. These alloys are used widely to aid foundry and machine shop practices, for anchoring components, to spot fixtures for awkward shapes, and for soldering. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Bi-2. Producer or source: Federated Metals Corporation, ASARCO Inc..

CHASE 69000 is a high-strength copper alloy that exceeds the strength levels of phosphor bronzes and some beryllium copper alloys. It is an electronic grade of copper alloy with excellent hot and cold-working characteristics. It is available in strip form and can be joined by soldering, brazing and resistance welding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-351. Producer or source: Chase Brass & Copper Company Inc..

Copper Alloy No. 858 is a copper-zinc-tin-lead (yellow brass) alloy for die castings. It is a low-cost, general-purpose alloy with good machinability and soldering characteristics. Its many uses include general and marine hardware, pump, impellers, plumbing parts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-354. Producer or source: Copper alloy producers.