Alcan 2056 clad alloy is an Al-Cu-Mg-Zn alloy, designed to improve assembly corrosion resistance, while exhibiting a good balance of tensile properties and high damage tolerance properties.This data sheet covers Alcan 2056 as clad sheet. Tempers are presented that show improvement over the 2024 alloy. This datasheet provides information on tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-404. Producer or source: Alcan Inc.

Alcan 2098 and 2x98 are Al-Cu-Li-Mg-Ag alloys designed to provide a balanced combination of high strength, low density, fatigue resistance, and fracture toughness for aerospace applications. This data sheet covers Alcan 2098 and 2x98 Al-Li fuselage sheets. The O and T82P tempers show improvement over the 2024 alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-405. Producer or source: Alcan Inc.

Alcan 6156 T4, T6 clad sheets were developed with weldability and high damage tolerance compared with incumbent 2024 alloy. Aerospace applications include fuselages clad sheets. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: AL-408. Producer or source: Alcan Inc.

Ultra-Form 80 is a low-alloy steel developed for its combination of high strength, good formability, fatigue resistance, toughness and weldability. It has a minimum yield strength of 80,000 psi and is characterized by its low carbon and alloy content, very fine ferrite grain size, and controlled inclusion shape and size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SA-291. Producer or source: Bethlehem Steel Corporation.

ALUMINUM 2021 is a cryogenic alloy whose ductility and relative notch toughness are not reduced as the tensile strength increases at the low temperatures. It is tough, weldable, and has good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-190. Producer or source: Aluminum Company of America.

ALUMINUM 6951 is a heat treatable alloy supplied in clad condition on one or both sides for brazing applications. The clad sheets or plates for brazing are designated as No. 21, No. 22, No. 23, and No. 24. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating and joining. Filing Code: Al-195. Producer or source: Aluminum Company of America.

Aluminum 3105 is a non-heat treatable aluminum alloy sheet material having excellent weldability, formability and corrosion resistance. It is recommended for appliances, trim and containers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-196. Producer or source: Aluminum Company of America.

TITANALOY is a zinc-base alloy containing copper and titanium. It can be readily formed, joined, and finished and is stronger and more dent resistant than the more common zinc alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Zn-13. Producer or source: Matthiessen & Hegeler Zinc Company.

BERYLCO PS-20 is beryllium sheet produced by rolling slabs of hot-pressed beryllium powder, PR-20 is the designation of the same composition rolled to plate. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-2. Producer or source: Kawecki Berylco Industries Inc..

USS AIRSTEEL X-200 is a very high strength, workable, air hardening steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-85. Producer or source: United States Steel Corporation.

Ti-4A1-3Mo-IV is an alpha-beta type titanium alloy having a good combination of high strength, creep and stability at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear, bearing, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-26. Producer or source: Titanium Metals Corporation of America.

MST 431 is an alpha-beta type sheet alloy presently being supplied in the solution treated, solution treated and aged, and annealed conditions. Its principal advantage is good formability in the solution treated condition with subsequent high strength capability through an aging treatment. Properties indicate good strength and thermal stability for sheet applications up to 800 F for long times. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-30. Producer or source: Reactive Metals Corporation.

ALCOA 6009 ALLOY offers the potential for lighter weight panels than steel or other aluminum alloy auto body sheet. It provides comparable performance, compatibility with existing production processes and a reasonable cost per unit of weight saved. It provides better dent resistance than most other aluminum body sheet alloys. Alloy 6009 has formability close to Aluminum 5182 with significantly higher weight savings. Scrap compatibility eliminates the segregation problems of mixed 2xxx and 5xxx scrap. Alloy 6009 scrap is readily recycled into itself or into casting alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Al-262. Producer or source: Aluminum Company of America.

ALCOA 6010 ALLOY offers the potential for lighter weight panels than steel or other aluminum alloy auto body sheet. It provides comparable performance, compatibility with existing production processes and a reasonable cost per unit of weight saved. It provides better dent resistance than most other aluminum body sheet alloys and mild steel of equal gage. Alloy 6010 formability is equal to that of 2036- T4 while offering greater strength. Scrap compatibility eliminates the segregation problems of mixed 2xxx and 5xxx scrap. Alloy 6010 scrap is readily recycled into itself or into casting alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-264. Producer or source: Aluminum Company of America.

ALCOA 2036 ALLOY was the first modern commercially acceptable aluminum autobody sheet alloy. It has been widely used in outer panel applications. It has moderate strength and formability and good strength after forming when no benefit can be expected from subsequent primer paint bake thermal cycles. It is not susceptible to Luders or stretcher-strain lines. See also AA 2036, Alloy Digest Al-300, October 1989 This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-267. Producer or source: Aluminum Company of America.

WEIRKOTE PLUS is a Galfan-coated sheet steel. The sheet is conventional low-carbon steel normally used for galvanized sheets and strip. This digest will concentrate on the characteristics and properties of the Galfan coating which is nominally a 95% zinc-5% aluminum alloy. The coating on Weirkote Plus is ideal for a variety of tough applications. It is excellent for products that require deep drawing and it combines extra corrosion resistance with superior formability. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Zn-41. Producer or source: Weirton Steel Corp.

AA 3105 is a non-heat treatable aluminum alloy with excellent weldability, formability and corrosion resistance. It is used in residential siding and rain carrying goods. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-289. Producer or source: Various aluminum companies.

Magnesium AZ31B is a general purpose wrought magnesium alloy for room temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Mg-53. Producer or source: The Dow Metal Products Company.

Ti-5Al-2.5Sn is a medium strength all alpha titanium alloy, designed primarily for use in sheet and strip form. It possesses excellent resistance to oxidation up to 1200 F and excellent creep resistance to 800 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-43. Producer or source: Titanium Metals Corporation of America.

AA 2036 was the first modern commercially acceptable aluminum autobody sheet alloy. It has been widely used in outer panel applications. It has moderate strength and formability and good strength after forming when no benefit can be expected from subsequent primer/paint bake thermal cycles. It is not susceptible to Luders or stretcher-strain lines. See also Alcoa 2036 Alloy, Alloy Digest Al-267, May 1986. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-300. Producer or source: Various aluminum companies.