Search Results for shear blades

AL Tech 609 is a silicon type of shock-resisting tool steel containing small additions of chromium, molybdenum and vanadium to increase hardenability, decrease grain size and improve mechanical properties. Because of its high elastic limit and fair ductility at comparatively high hardness, it has the ability to withstand heavy shocks before bending or breaking. Its many uses include shear blades, heavy-duty punches, pneumatic tools for severe service and machine parts subject to shock. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-363. Producer or source: AL Tech Specialty Steel Corporation.

HAYNES Alloy No. 273 is a nickel-base, hard-facing alloy developed to provide extra life for hot-working equipment such as hot-forging dies, hot-shear blades and hot-extrusion dies. It is deposited by using a composite electrode with nickel-base core and the balance of the alloying elements in the flux coating. Deposits retain their hardness up to 1200 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-208. Producer or source: Cabot Corporation.

Thermodur 2714 is a tough die steel with high tempering resistance and good through hardening. Typical applications include forging dies, mandrels, die holders, armored trim dies, and hot-shear blades. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming and heat treating. Filing Code: TS-694. Producer or source: Schmolz + Bickenbach USA Inc.

CYCLOPS SCK is a cold-work tool steel with a balanced composition to provide air hardening and an optimum combination of toughness, wear resistance and minimum distortion during heat treatment. Typical applications are shear blades, trimming dies and forming rolls, including grade rolls for cutlery and flatware. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-346. Producer or source: Cyclops Corporation.

CARPENTER SEVEN STAR is a molybdenum-type high-speed steel containing tungsten. It bears some similarity to AISI Type M1; however, its increased carbon and vanadium percentages (over M1) provide improved cutting efficiency without materially lowering its toughness. Seven Star is an ESR (Electro Slag Remelted) high-speed steel. Its many uses include blanking dies, drills, lathe tools, punches and shearing blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-348. Producer or source: Carpenter.

VASCO 8-N-2 is a molybdenum high-speed steel containing a low percentage of tungsten. It can be used successfully for a variety of cutting tools; in fact, it is a general-purpose high-speed steel. Its composition represents the first molybdenum high-speed steel to be manufactured and find practical use in the field of cutting tools. Its many uses include drills, milling cutters, lathe tools, blanking dies and special shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-351. Producer or source: Teledyne Vasco.

CYCLOPS S1 (formerly Alco M) was originally developed for chisel and pneumatic tool purposes. It is now used for many other cold and hot work applications because of its outstanding toughness and resistance to fatigue. It gives excellent results in those instances where shock and impact are major factors. It may be carburized for those applications where high wear resistance and great core strength are required. Its many applications include shear blades, rivet busters and forging dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-352. Producer or source: Cyclops Corporation.

SIMONDS D-2 is an air-hardening tool and die steel of the high-carbon, high-chromium type. It is characterized by high resistance to abrasion, fair toughness, minimum distortion in hardening and high compressive strength. Its many uses include a wide range of cutting and forming dies, rolls, reamers, plug gages and shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-336. Producer or source: Guterl Special Steel Company.

FAGERSTA M-2 is a widely used molybdenum-base high-speed steel. It is suitable for all general-purpose cutting-tool applications and it has an excellent combination of toughness and wear resistance. Its many applications include boring tools, chisels, lathe tools and shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and surface treatment. Filing Code: TS-337. Producer or source: Fagersta Steels Inc..

UNS No. T30402 is an air-hardening high-carbon, high-chromium cold-work die steel that offers excellent wear resistance. It is a deep-hardening steel but hardens with a minimum change in size and volume. Typical uses are cold-work dies, slitting cutters, shear blades and wood-working tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-341. Producer or source: Tool steel mills.

WANDO belongs to that class of oil-hardening tool steels known as non-deforming steels. It will develop full hardness on oil quenching from a relatively low temperature with minimum volume change, hence non-deforming. It is a general-purpose tool and die steel. Among its many applications are dies for many purposes, shear blades, taps and reamers. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-354. Producer or source: Cyclops Corporation.

GUTERL S-5 is a shock-resisting steel recommended for severe and repeated impacts in service. It has an excellent combination of toughness and hardness to survive the high stresses in service and to resist abrasion and wear. It is normally hardened by austenitizing and quenching in oil but it can be water quenched successfully with proper precautions. Its many uses include hammers, hand chisels, boiler punches, shear blades and pneumatic tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-357. Producer or source: Guterl Special Steel Corporation.

GUTERL A-2 is a high-hardenability cold-work tool and die steel with excellent non-deforming properties. It is air hardening and therefore exhibits a high degree of dimensional stability in heat treatment. It is recommended where the application requires a good combination of machinability, wear resistance and toughness. Among the many uses of Guterl A-2 are shear blades, blanking and forming dies, punches and burnishing tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-364. Producer or source: Guterl Special Steel Corporation.

AL Tech D-5 is a high-carbon, high-chromium tool and die steel; it contains cobalt (3.30%) and is air-hardening and nondeforming. The cobalt impacts a pronounced secondary hardening effect in tempering and a non-galling effect. AL Tech D-5 has both superior abrasion resistance and greater edge strength than ordinary high-carbon, high-chromium die steels. It is used for many types of dies, hot-piercing punches and shear blades. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-372. Producer or source: AL Tech Specialty Steel Corporation.

CYCLOPS L6 is an oil-hardening tool steel recommended for any tool-steel application requiring relatively great toughness, or where intricate shapes preclude the use of water-hardening steels. It is also recommended for machine parts and other components that require an excellent combination of hardness, wear resistance, compressive strength and toughness. Typical applications include dies of various types, arbors, punches, pinions, shear blades and clutch parts. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-375. Producer or source: Cyclops Corporation.

VASCO M-7 is a molybdenum type of high-speed steel having tungsten, chromium and molybdenum contents similar to AISI Type MI high-speed steel, but with higher carbon and vanadium. The increased percentages of carbon and vanadium add to the cutting efficiency of the steel without materially lessening the toughness. This steel has met with considerable favor among high-speed steel users who are seeking improved cutting properties for specific applications. Its many applications include drills, end mills, milling cutters, punches and shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-379. Producer or source: Teledyne Vasco.

AISI Type H12 is a general-purpose, low-carbon, chromium-molybdenum-tungsten hot-work steel for tools and dies that require high toughness. It has high hardenability and offers high resistance to softening in service at elevated temperatures. It also offers good resistance to heat checking and may be water cooled in service. It is suitable for hot-work applications involving severe conditions of shock and sudden temperature changes. Its many applications include hot shear blades, forging dies, extrusion dies, punches and other types of hot-work tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-381. Producer or source: Tool steel mills.

GUTERL D-2 is a high-hardenability tool and die steel of the high-carbon, high-chromium type. It has high compressive strength, his resistance to abrasion, minimum distortion in hardening but only fair toughness. Among its many uses are rolls, punches, shear blades, lathe centers and many types of cutting and forming dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-380. Producer or source: Guterl Special Steel Corporation.

HOTFORM No. 3 is a medium-carbon, air-hardening, cold-work die steel. It also is used in some applications as a hot-work tool and die steel. An excellent combination of high hardenability, good wear resistance and toughness makes Hotform No. 3 useful for special tools. Typical applications are blanking dies, cold-forming dies, punches and cold and hot shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-386. Producer or source: Teledyne Vasco.

HAYNES alloy No. N-6 is a nickel-base hardfacing alloy that combines excellent wear resistance with good corrosion resistance and good impact properties. Alloy No. N-6 does this without dependency on cobalt and with significant cost savings over the traditionally used cobalt-base alloys. HAYNES alloy No. N-6 should be evaluated for applications such as fluid valves, corn-cutting knives, glass-shearing blades and automatic applications where STELLITE alloy No. 6 has been used successfully. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-274. Producer or source: Cabot Corporation.