Search Results for shafts

AQUAMET 17 is a precipitation-hardening stainless steel that provides the best combination of strength, toughness, wear resistance and corrosion resistance available for shafting where extra strength and precision straightness are needed. It is in wide use in various types of boats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-326. Producer or source: Armco Steel Corporation, Advanced Materials Division.

AQUAMET 18 is a low-nickel austenitic stainless steel having seawater corrosion resistance better than AISI Type 304 and approaching that of AISI Type 316 stainless steel. Its good strength and super toughness make it an ideal material for pleasure and work boats. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-332. Producer or source: Armco Steel Corporation, Advanced Materials Division.

AQUAMET 22 is an austenitic stainless steel with an outstanding combination of strength, toughness and corrosion resistance. Its corrosion resistance is equal to or better than any other boat shafting material, even better than most high-nickel alloys. It is the best material available for pleasure both shafts, considering that pleasure boats spend much of their time tied up at docks where corrosion factors may be highest. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-338. Producer or source: Armco Steel Corporation, Advanced Materials Division.

BUNTING Alloy 937 is a cast bushing and bearing bronze. It is one of the most satisfactory materials to use where shaft alignments or shaft wear is a problem. It has a good load capacity and excellent anti-friction characteristics. Its many uses include pressure-tight castings, corrosion-resistant applications, bearings and pumps. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-373. Producer or source: NL Industries Inc., Bearing Division.

AISI 1139 is a carbon steel containing 1.35-1.65% manganese and 0.13-0.20% sulfur to furnish free-machining characteristics. It is recommended especially for high-production machined products. Among its many applications are splined shafts, screws, arbors, tool holders and propeller shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-82. Producer or source: Carbon steel mills.

AISI 1137 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to provide free-machining characteristics. It is recommended especially for high-production automatic machine products. AISI 1137 has relatively low hardenability. In the longitudinal direction its ductility and toughness are fairly good but in the transverse direction they tend to be low. Its many uses include spline shafts, mine-car axles and shafts, gears, bolts, tool holders and tie-rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-97. Producer or source: Carbon steel mills.

AISI 1144 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.24-0.33% sulfur to provide a free-machining steel. It is recommended especially for high-production automatic machine products. It has relatively low hardenability. Its ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses of AISI 1144 include mine-car axles and shafts, screws, propeller shafts, ball joints, bushings, bolts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-98. Producer or source: Carbon steel mills.

LEDLOY 4140 is a lead and/or tellurized chromium-molybdenum alloy steel having free cutting characteristics. It is recommended for gears, shafts, fasteners and similar machinery parts. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-212. Producer or source: Inland Steel Company. Originally published as Incut 4140, June 1967, revised August 1994.

SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

HIDURON alloy 191 was developed for marine applications where both a combination of strength and good corrosion/ impingement resistance is needed. It finds applications in shafts, fasteners and valve stems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-601. Producer or source: Langley Alloys Ltd.

BioDur TrimRite Stainless has a composition that is balanced to be fully martensitic in the hardened condition. The alloy possesses a moderately high level of corrosion resistance and is applied as valve parts, guides, shafting and cutlery, including surgical tools. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-599. Producer or source: Carpenter.

Colmonoy No. 635, a Nickel-base hard surfacing Alloy, contains a formulated mixture of both crushed and atomized powders. It achieves a hardness of RC 58-63 with tungsten carbide particles. Typical applications include hardfacing of pump components and shaft sleeves. It is supplied as a powder for aplication with Wall Colmonoy’s SPRAYWELD Process. This datasheet provides information on composition, physical properties, microstructure, and hardness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Ni-495. Producer or source: Wall Colmonoy Corporation.

Project 70 stainless type 303 and Project 7000 stainless type 303 are free-machining stainless steels of the austenitic chromium-nickel type. They offer significantly improved machinability and longer tool life. These steels are suited particularly for automatic bar-machine and Swiss-type machine operations where longer tool life results in more productive machining time. Applications include shafts, valve bodies, valves, valve trim, and fittings. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-409. Producer or source: Carpenter. Originally published June 1982, revised June 1997.

Hy-Ten B Temper No. 2 is a low-chromium medium-carbon steel combining strength, toughness and wear resistance. It is recommended for gears, rolls, shafts and other machine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-133. Producer or source: Wheelock, Lovejoy & Company Inc..

AISI 4422 is a carbon-molybdenum type carburizing steel designed as alternate for the AISI 8600 grades of steel for single quench practice. It is recommended for case hardened gears, pinions, shafts and the like. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-136. Producer or source: Timken Roller Bearing Company.

Ni-Bral nickel-aluminum bronze is a material having high strength and good corrosion resistance. It is recommended for marine propellers, impellers, valves, gears, and shafting. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-124. Producer or source: American Manganese Bronze Company.

AMPCOLOY 45 is a high strength, extra tough bronze for machine tool parts, gears, shafts, etc. It is heat treatable and has excellent to corrosion, wear and abrasion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-128. Producer or source: Ampco Metal Inc..

Jessop-Saville H.27 is a medium carbon, chromium-molybdenum nitriding steel recommended for components subjected to heavy stresses and severe wear, such as crankshafts and air-screw shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-164. Producer or source: Jessop-Saville Ltd, Brightside Works.

AISI No. 630 is a precipitation hardening stainless steel which is used in a variety of applications requiring strength combined with corrosion resistance. It is recommended for chemical process equipment, valve parts, aircraft fittings, pump shafts, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-156. Producer or source: Various alloy steel mills (licensed).

Heppenstall 6H55 is a medium carbon, alloy tool steel recommended for dies, gears, and shafting where toughness and abrasion are factors of performance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-151. Producer or source: Midvale-Heppenstall Company.