CABOT Ti-3A1-2.5V alloy is both lightweight and strong. It has a high strength-to-weight ratio which provides a major design advantage saving weight. It can be formed readily and it has good weldability. Seamless tubing of CABOT Ti-3A1-2.5V was developed for aircraft hydraulic and fuel systems and its performance has been proved by use in various types of aircraft and aerospace vehicles. CABOT Ti-3A1-2.5V is available as plate, sheet and seamless tubing and pipe. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-85. Producer or source: Cabot Wrought Products.

Sandvik titanium Grade 2 is chemically pure (CP) titanium produced as seamless and SeamFree tubing. The alloy is resistant to a wide variety of chloride media and is used to handle seawater. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: TI-108. Producer or source: Sandvik.

Haynes Ti-3Al-2.5V alloy is used where the strength/weight ratio is of prime importance; the alloy is 43% lighter than 21-6-9 stainless steel. It is most often used in the form of seamless tubing for aircraft hydraulic systems. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TI-145. Producer or source: Haynes International Inc.

CUPRO NICKEL, 10%-755 is a highly ductile, malleable and corrosion resisting alloy, suitable for condenser tubes and many other engineering applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-77. Producer or source: American Brass Company.

STROLOY 5C is a high-strength low-alloy steel developed for seamless hot-or-cold finished tubing and extruded shapes in the water-quenched-and-tempered condition. In this condition the steel exhibits high tensile and yield strengths and good ductility. It can be are welded readily using the procedures prescribed by the manufacturer. Preheat, postheat and stress relief normally are not required. Stroloy 5C tubing is used for applications requiring a good combination of strength, toughness and weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-410. Producer or source: Babcock & Wilcox Company. See also Alloy Digest SA-213, revised December 1976.

AA 5456 is a wrought aluminum-magnesium alloy of relatively high strength with good welding characteristics making it suitable for structural applications. (See also Aluminum 5456, Alloy Digest Al-70, September 1958.) This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Al-316. Producer or source: Various aluminum companies.

MST 3A1-2.5V is a highly weldable titanium alloy having greater room and elevated temperature strength with greater flarability than commercially pure titanium. It is also age-hardenable. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ti-18. Producer or source: Mallory-Sharon Metals Company.

Copper No. 142 is an arsenical copper deoxidized with phosphorus. Its capacity is excellent for hot forming or cold working and it has excellent joinability characteristics for soldering, brazing and gas-shielded arc welding. Its leading use is tubing for condensers and heat exchangers. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-284. Producer or source: Copper and copper alloy mills.

AL 800H and AL 800AT are nickel-iron-chromium alloys designed to resist oxidation and carburization at elevated temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-717. Producer or source: Allegheny Ludlum Corporation.

Sandvik Zr 702 is, in many cases, the most corrosion resistant alloy available and is used for that specific reason. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: ZR-13. Producer or source: Sandvik Materials Technology.

ALLEGHENY LUDLUM AL 2205 ALLOY is in the family of duplex alloys in which added nitrogen significantly improves corrosion resistance, especially in the welded condition. The microstructure consists of a balanced mixture of austenitic and ferritic phases. Its corrosion resistance to many environments is superior to Types 316 or 317 and it has a yield strength more than double that of AISI conventional austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-462. Producer or source: Allegheny Ludlum Corporation.

MA23 alloy is a Ni-22Cr-14W-2Mo-1.5Co (mass%) nickel alloy that has excellent strength and oxidation resistance at high temperature and with good formability. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on forming, heat treating, and joining. Filing Code: Ni-732. Producer or source: Hitachi Metals.

Sandvik SAF 2707 HD is a duplex stainless steel, highly alloyed at 27 Cr, 6.5 Mo, 4.8 Mo, 1.0 Co, and 0.4 N. The alloy can be used in aggressive acidic chloride conditions. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-999. Producer or source: Sandvik Steel Company.

The AL-6XN PLUS alloy is an enhanced version of the AL-6XN alloy (see Alloy Digest SS-494, May 1988). Both satisfy the composition requirements of UNS N08367, but AL-6XN PLUS contains a greater concentration of the alloying elements (Cr, Mo, and N) which promote corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-923. Producer or source: Allegheny Ludlum Corporation. Originally published April 2005, revised June 2005.

Sandvik Sanicro 29 is a corrosion resistant grade (CRA) available as seamless product heavily cold worked for oil country tubular applications at high strengths. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-1169. Producer or source: Sandvik Steel Company.

NSSMC 845 is a 46Ni-23Cr-4W-Fe alloy with 3Cu for added corrosion resistance in reducing media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Ni-733. Producer or source: Sumitomo Metal USA Corporation.

ALUMINUM 6063 is an age-hardenable extrusion alloy with excellent working properties especially in the annealed condition. It has excellent resistance to corrosion in all tempers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-42. Producer or source: Various aluminum companies. Originally published August 1956, revised January 1974.

NICROFER 3220 is an austenitic, solid-solution nickel-iron-chromium alloy characterized by good corrosion and heat resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-475. Producer or source: VDM Technologies Corporation.

MA-X alloy is a Ni-22Cr-18Fe-9Mo-1.5Co-0.6W (mass %) nickel alloy that has excellent strength and oxidation resistance at high temperature and with good formability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-731. Producer or source: Hitachi Metals.

ANACONDA Alloy (E) 505 is a low-tin phosphor bronze with excellent resistance to corrosion, excellent ductility and good resistance to fatigue. It has good thermal and electrical conductivity. Its uses include flexible metal hose, electrical contacts, fuse clips and fasteners. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-385. Producer or source: Anaconda American Brass Company.