1-20 of 528 Search Results for

saws

Sort by
Journal Articles
Alloy Digest (1981) 30 (9): TS-387.
Published: 01 September 1981
... GUTERL M-2 is a molybdenum-tungsten type of high-speed steel with fairly good resistance to decarburization. It is a general-purpose high-speed steel and it provides excellent resistance to abrasion and shock. It is used widely for cutting tools. Among its many applications are hack saws, circular...
Journal Articles
Alloy Digest (1984) 33 (11): TS-432.
Published: 01 November 1984
... REX TMO molybdenum-tungsten high-speed steel is a tough, general-purpose high-speed steel with high cutting efficiency and excellent finishing properties. It is adapted to fast light cuts on soft or medium hard materials. Among its many applications are blanking dies, twist drills, circular saws...
Journal Articles
Alloy Digest (2000) 49 (1): CS-134.
Published: 01 January 2000
... SANDVIK 15N2 is strip steel for stonecutting saws and especially designed for the manufacture of diamond saw blades. This datasheet provides information on composition, physical properties, hardness, and tensile properties. Filing Code: CS-134. Producer or source: Sandvik. Producer or Source...
Journal Articles
Alloy Digest (1978) 27 (12): TS-343.
Published: 01 December 1978
... SIMONDS M-2 is a general-purpose high-speed steel with excellent resistance to abrasion and shock. It is a molybdenum-tungsten type of high-speed steel and is not particularly susceptible to decarburization. Its many applications include lathe tools, gear cutters, thread chasers and circular saws...
Journal Articles
Alloy Digest (1981) 30 (12): TS-391.
Published: 01 December 1981
..., continuous cutting applications that require the ultimate in red hardness. Its toughness is as great as that of other high-speed steels. Its typical uses include circular saws, broaches, gear cutters, twist drills and taps. This datasheet provides information on composition, physical properties, hardness...
Journal Articles
Alloy Digest (1997) 46 (2): TS-550.
Published: 01 February 1997
... Lukens cold-work tool steels A2, D2, O1, S5, and S7 are used in applications where an air-hardening, oil-hardening, or shock-resisting tool steel is required. These steels are available in full-size, annealed plates suitable for saw cutting and/or finishing. Parts can subsequently be machined...
Journal Articles
Alloy Digest (1998) 47 (2): TS-560.
Published: 01 February 1998
... types, taps, cutting tools, broaches, reamers, countersinks, chasens, segments for circular saws, shaping tools, and woodworking tools. This datasheet provides information on composition and physical properties. It also includes information on heat treating and machining. Filing Code: TS-560. Producer...
Journal Articles
Alloy Digest (2002) 51 (6): Ni-584.
Published: 01 June 2002
... Rima 82 is an Inconel-type welding wire for tungsten inert gas (TIG), metal inert gas (MIG), and submerged arc (SAW) welding of nickelbase alloys and dissimilar joints between nickel alloys and ferritic and austenitic stainless steels. The alloy is also known generically as filler metal 82 (FM82...
Journal Articles
Alloy Digest (2002) 51 (11): Ni-593.
Published: 01 November 2002
... (MIG), and submerged arc (SAW) welding. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-593. Producer or source: Metrode Products Ltd. Producer or Source...
Journal Articles
Alloy Digest (2003) 52 (1): Ni-599.
Published: 01 January 2003
... RIMA 625, or 62-50, is a consumable or solid wire for tungsten inert gas (TIG), metal inert gas (MIG), and submerged arc welding (SAW). The consumable is used for matching the nickel-base alloy 625 or N06625 (see Alloy Digest Ni-121, February 1967) with typical composition Ni-20%Cr-9%Mo-3.5%Nb...
Journal Articles
Alloy Digest (2003) 52 (4): Ni-606.
Published: 01 April 2003
... Metrode 20.70 Nb is a nickel-base consumable with a nominal composition of Ni, 20% Cr, and 2.5% Nb. This alloy is used to join a variety of oxidation-resistant nickel alloys. The product is a solid wire for tungsten inert gas (TIG), metal inert gas (MIG), and submerged arc welding (SAW...
Journal Articles
Alloy Digest (1966) 15 (10): SA-202.
Published: 01 October 1966
... Code: SA-202. Producer or source: Simonds Steel Division, Simonds Saw & Steel Company. Producer or Source: Simonds Steel Division, Simonds Saw & Steel Company Copyright © ASM International® 1996 1996 ASM International castability chemical composition coercive force corrosion...
Journal Articles
Alloy Digest (1999) 48 (12): CS-133.
Published: 01 December 1999
... SANDVIK 15LM is strip steel especially suited for automatic production of hand and bow saws. This datasheet provides information on composition, physical properties, hardness, and tensile properties. Filing Code: CS-133. Producer or source: Sandvik. Producer or Source: Sandvik Copyright ©...
Journal Articles
Alloy Digest (2009) 58 (10): Al-425.
Published: 01 October 2009
... movements during sawing or machining operations. Applications requiring better flatness may not be suitable for higher-strength alloys. See Fig. 1. Machinability: Better Machinability. A standardized lathe test ranks machinability by measuring cut chip sizes and surface finishes. This measurement system...
Journal Articles
Alloy Digest (1984) 33 (2): SS-439.
Published: 01 February 1984
.... do not let cutting tool idle or ride on work. Maintain high degree of rigidity of tools. tool holders. etc. Use ample supply of coolant at point of cutting. Sawing: Eastern Stainless Type 316L can be sawed readily on reciprocating type saws. conventional band saws and friction saws. Assure constant...
Journal Articles
Alloy Digest (1976) 25 (8): SS-332.
Published: 01 August 1976
... tools Milling (end mill Super H-S steel tools Threading. die head, H-S steel tools Threading, single point, H-S steel tools Carbide tools Drilling, High-Speed steel tools Saw Cutting (Heavy Pressure) Reciprocating H-S steel blade Band saw Speed sfpm Feed IO01SO 0.005-0.015 in./rev 130-l 20 0.003-0.005...
Journal Articles
Alloy Digest (1983) 32 (2): SS-420.
Published: 01 February 1983
... and strengthened only by cold working. Machining and Sawing: Eastern Stainless Type 316 is considerably tougher than plain carbon steel; therefore, it requires more powerful equipment for machining. Heavy feeds and slow spindle speeds are most suitable. Because of tendency to work harden, do not let cutting tool...
Journal Articles
Alloy Digest (1983) 32 (6): SS-427.
Published: 01 June 1983
.... Maintain high degree of rigidity of tools, tool holders, etc. Use ample supply of coolant at point of cutting. Type 304L can be sawed readily on reciprocating type saws, conventional band saws and friction saws. Assure constant feed to prevent work hardening. Use an ample supply of coolant at the point...
Journal Articles
Alloy Digest (2014) 63 (3): SA-697.
Published: 01 March 2014
... should remain below 300 ºC (572 ºF). After the welding, the PWHT should be done at 580 ºC (1076 ºF) to remove welding stress. This alloy can be welded using SAW and SMAW process. Consumables used for the welding of this alloy should meet the following standards: SMAW: EN 757 E69 5 (or 6) Mn2NiCrMo B 42...
Journal Articles
Alloy Digest (2012) 61 (2): SA-644.
Published: 01 February 2012
... Preheating temperature Postheating < 15 mm H 2 < 5 mL/100 g (FCAW, GMAW) No preheating Not required (0.6 in.) H 2 > 5 mL/100 g (SMAW, SAW) No preheating Not required 15 50 mm H 2 < 5 mL/100 g (FCAW, GMAW) 130 °C (265 °F) Not required (0.6 2.0 in.) H 2 > 5 mL/100 g (SMAW, SAW) 130 °C (265 °F) 100 °C/2 h (210...