JESSOP TRUFORM is the general-purpose, oil-hardening, non-deforming alloy tool steel for applications where dimensional accuracy is required. It shows very low distortion in heat treating and very high safety (against cracking) in hardening. Truform has deep-hardening properties, a fine-grain structure, and is unusually tough. Its many applications include blanking dies, master tools, milling and form cutters, paper knives, punches and taps. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-411. Producer or source: Jessop Steel Company.

ULTIMO-6 is a chromium-nickel-molybdenum tool and die steel applicable where resistance to shock is important and where water cooling may be utilized with safety. It is particularly adapted to large dies where first cost is a major consideration. This datasheet provides information on composition and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-31. Producer or source: Atlas Steels Company.

ONTARIO is an air-hardening die steel of the high-carbon high-chromium type. It has high hardness, high resistance to abrasion and excellent nondeforming characteristics. It is suited for a wide range of applications in which high abrasion resistance must be combined with high compressive strength and safety in hardening. Typical uses are cold-forming dies, forming rolls, thread-rolling dies, slitters and gages. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-323. Producer or source: AL Tech Specialty Steel Corporation.

UHB SVERKER 21 is a high-carbon, high-chromium cold-work tool steel alloyed with molybdenum and vanadium. It has high hardenability and high surface hardness after hardening. It has excellent wear resistance and high compressive strength along with moderate toughness (shock resistance). This steel also is characterized by excellent stability (safety) in hardening and good resistance to tempering. Its many applications include a wide range of cold-working dies, cold-heading tools, gages, knurling tools and shears. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating and machining. Filing Code: TS-356. Producer or source: Uddeholm Steel Corporation.

INDALLOY 158 is a bismuth-base, eutectic alloy that has a melting point of 158 F (70 C). It is an easily castable material that is ready for use as soon as it freezes. It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it of great use in industry for such applications as sprinkler and fire safety devices, support for bending pipe and tubing, anchoring aircraft parts for machining, and seals for annealing and nitriding furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-27. Producer or source: Indium Corporation of America.

OSTALLOY 136 is a bismuth-base, low-melting eutectic alloy; it melts at 136 F (57.8 C), hence its identifying number. This alloy finds wide use in industry and in laboratories because of its low melting temperature and controlled-shrinkage characteristics. It can be recovered easily and recycled into new uses any number of times. Among many applications Ostalloy 136 is used for anchoring components for machining and grinding, proof casting in foundries, dental models and fusible elements in safety devices. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-28. Producer or source: Arconium Corporation of America, A.J Oster Company.

Bismuth-26.7Pb-13.3Sn-10Cd is a bismuth-base, eutectic alloy that is melted and cast easily and is ready for use as soon as it freezes. It has a melting point of 158 F (70 C). It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it of great use in industry for such applications as sprinkler and fire safety devices, support for bending pipe and tubing, anchoring aircraft parts for machining, and seals for annealing and nitriding furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-32. Producer or source: Producers of low-melting alloys.

Copper Alloy No. C82400 is a copper-base alloy containing nominally 1.70% beryllium. It is characterized by high strength and good resistance to corrosion. Typical applications include safety tools, molds for parts made of plastics, cams, valves and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-525. Producer or source: Copper alloy foundries.

INCO Alloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with outstanding corrosion resistance that is maintained even in the welded condition. It also has excellent resistance to oxidizing media. It is widely used in the severest environments encountered in chemical processing, pollution control, industrial and municipal waste treatment, pulp and paper production, and other fields. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-311. Producer or source: Huntington Alloys.

CERROLOW-136 Alloy is a bismuth-base eutectic alloy that melts at 136 F (57.8 C), hence its identifying number. It is widely used in industry because of its low melting temperature and controlled-shrinkage characteristics. Among tis many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound cores and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-13. Producer or source: Cerro Metal Products.

INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include low-temperature solder, proof casting, fusible elements in safety devices and model railroading. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-26. Producer or source: Indium Corporation of America.

Bismuth-21In-18Pb-12Sn is a bismuth-base eurectic alloy that melts at 136 F (57.8 C). It is widely used in industry because of is low melting temperature and its controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound corse and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Bi-35. Producer or source: Producers of low-melting alloys.

Trojan is a high-strength precipitation hardening copper-nickel-silicon alloy. It also has industrial media for safety in engineering. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as forming and joining. Filing Code: Cu-847. Producer or source: Columbia Metals Ltd.

Ostalloy 255 is a bismuth-base eutectic alloy that melts at the low temperature of 255 F (124 C). After freezing it is characterized by initial shrinkage followed by slow growth. It provides scientists and engineers with an easily castable material that is ready for use practically as soon as it freezes. It can be recovered easily and recycled into new uses any number of times. Among its many uses are (1) Anchoring metal parts in glass, (2) Filler for large diameter tubes for bending, (3) Proof casting forging dies, (4) Fusable elements is safely plugs and (5) Mechanical dentistry. This datasheet provides information on composition, physical properties, and hardness. It also includes information on casting, heat treating, and machining. Filing Code: Bi-25. Producer or source: Arconium Corporation of America, A.J Oster Company.

CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.

INDALLOY 136 is a bismuth-base, eutectic alloy that melts at 136 F (57.8 C). It is used widely in industry because of its low melting temperature and controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its uses are anchoring parts for machining, proof casting and low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-24. Producer or source: Indium Corporation of America.

Dogal H 700 LAD is a galvanized hot rolled steel that is microalloyed and can be cold formed. The 700 signifies the minimum yield strength. This datasheet provides information on composition, physical properties, tensile properties. and bend strength. It also includes information on forming. Filing Code: CS-184. Producer or source: SSAB Swedish Steel Inc..

INDALLOY No. 255 is a fusible alloy that melts at 255 F. This low-melting eutectic alloy provides scientists and engineers with an easily castable material that is ready for use as soon as it freezes. It can be recovered easily and recycled into new uses any number of times. Among its many applications are proof-casting, liquid seals for heat-treating furnaces, non-shrinking patterns and dental models. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-18. Producer or source: Indium Corporation of America.

OSTALLOY 281 is a bismuth-base eutectic alloy. Its melting temperature is 281 F (138 C); this is the highest melting point of the bismuth-base alloys commonly used in industry. It provides an easily castable material ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include holding jet engine blades for machining, foundry patterns and fusible elements in safety devices. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-17. Producer or source: Arconium Corporation of America, A.J Oster Company.

Beralcast 363, 191, and 310 are lightweight beryllium-aluminum (Be-Al) alloys for producing near net shapes by investment casting. Beralcast 363 is used primarily for structural applications, Beralcast 191 is used primarily for electronic packaging and Beralcast 310 for wrought products (from cast input material). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. Filing Code: BE-9. Producer or source: Nuclear Metals Inc.