Search Results for relays parts

MAGNIFER 75 is a soft magnetic nickel-iron alloy containing about 5% copper and 2% chromium. It offers very high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound toroids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-294. Producer or source: Vereingte Deutsche Metallwerke AG.

MAGNIFER 7904 is a soft magnetic nickel-iron alloy containing about 5% molybdenum. It offers extremely high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound troids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-291. Producer or source: Vereingte Deutsche Metallwerke AG. Originally published September 1983, revised February 1984.

MAGNIFER 50 is a soft magnetic iron-nickel alloy containing about 48% nickel. It has a saturation induction of 1.55T and a high permeability. It exhibits the highest saturation induction obtainable with iron-nickel alloys. Typical applications are (1) Low-frequency power transducers, (2) Chokes (Coils), (3) Relay parts and (4) Integrating current transformers for Fi-protective switches. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-70. Producer or source: VDM Technologies Corporation.

Carpenter 430FR Solenoid Quality stainless steel is a ferritic chromium-iron alloy developed especially for A.C. and D.C. magnetic circuit applications such as solenoid valve core components and electromagnetic relay cores. The electrical resistivity of 430FR is approximately 25% higher than other commercially available 430F stainless. Increased electrical resistivity provides better performance of magnetic components, particularly at power frequencies and high magnetic flux density. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-337. Producer or source: Carpenter.

Wieland-K50 (C70260) is copper alloyed with low nickel for good fabricability for parts in the electrical industry, such as stamped parts, connectors, and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-838. Producer or source: Wieland Metals Inc..

Revere No. 145 is a free-cutting grade of copper recommended for high conductivity parts, such as electrical connectors, relays, fasteners, contacts, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-166. Producer or source: Revere Copper and Brass Inc..

ULTRONZE is a copper alloy also known as Olin Alloy 654. It bridges the gap between standard high-performance copper alloys and beryllium-copper alloys, thus enabling the design of parts with properties previously only attainable with more expensive materials. The alloy has superior stress-relaxation characteristics, good bend performance and excellent corrosion resistance. Among its typical uses are electrical connectors, fuse clips and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-417. Producer or source: Olin Brass.

Copper Alloy No. C43400 is a copper-zinc-tin alloy that can be cold worked readily by all conventional processes. It has moderate strength and good ductility. This alloy is used typically for electrical switch parts, contacts and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-488. Producer or source: Brass mills.

Alloy CuSn6 (UNS C51900) is a high-performance copper alloy. Typical uses include components for the electronics industry such as connector springs, relays, leaf springs, and switches as well as machine parts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-873. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

ARMCO MAGNETIC INGOT IRON is a grade of commercially pure iron recommended for magnetic purposes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-10. Producer or source: Armco Inc., Eastern Steel Division. Originally published March 1956, revised January 1963.

AL 4750 is a low-expansion, high-permeability iron-nickel alloy. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: FE-4. Producer or source: Allegheny Ludlum Corporation. Originally published as Allegheny 4750, February 1954, revised January 2001.

Austral Wright Alloy B25 (UNS C17200) is a wrought beryllium copper alloy. It provides the highest strength of any copper alloy, with electrical conductivity considerably greater than that of other high-strength copper alloys. Since it is heat treated after forming, it provides excellent formability and ductility. This alloy features good stress relaxation resistance and high fatigue strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-943. Producer or source: Austral Wright Metals.

Magnifer 4008 is a soft-magnetic alloy with 40% Ni and 8% Cr. The alloy has high permeability values and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: FE-123. Producer or source: Krupp VDM.

CMI-C Magnetic Iron is a low-carbon magnetic iron especially processed with a critical strain for optimum uniformity. Maximum magnetic properties are achieved following suggested final anneal applied to fabricated parts. Its applications include electromagnet cores, plungers and pole pieces; generator and motor field frames; magnetic chucks; and chuck plates. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-75. Producer or source: Connecticut Metals Incorporated.

Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm 2 /m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

Magnifier 36 is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 0.75 ohm mm 2 /m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-111. Producer or source: VDM Technologies Corporation.

Supra 36 is a Fe-Ni alloy with 36% nickel content that exhibits the highest electrical resistivity in the Fe-Ni system. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Fe-159. Producer or source: Aperam Alloys USA.

Allegheny Ludlum No. 2 and No. 5 relay steels are iron/silicon alloys. They are soft magnetic alloys that combine high magnetic permeability, low residual magnetization and low coercive force with good mechanical properties and fabricability. This datasheet provides information on composition and physical properties. It also includes information on forming, heat treating, and machining. Filing Code: Fe-97. Producer or source: Allegheny Ludlum Corporation.

Copper Alloy No. 175 is a wrought copper alloy that combines high strength with good electrical and thermal conductivities. It can be hardened by aging after a solution treatment. It is used for a variety of electrical hardware components and for industrial welding equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: Cu-333. Producer or source: Copper and copper alloy mills.

Copper Alloy No. 173 is a precipitation-hardenable beryllium-copper alloy with a lead addition of nominally 0.40% to give it fairly good machinability. By combining work hardening and precipitation hardening, tensile strengths in excess of 200,000 psi can be developed. This alloy is characterized by high elastic and fatigue strengths, excellent resistance to wear and high resistance to general corrosion. Its many uses include springs, fuse clips, switch parts, pump parts and welding equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-394. Producer or source: Copper and copper alloy mills.