Search Results for reactor vessels

UNILOY 50Cr/50Nj is an improved corrosion-resistant, wrought alloy with outstanding resistance to a wide variety of corrosive media. It is recommended for oil refinery heaters, incinerator components, metallurgical heat treating furnace components and reactor vessels for treating pulping liquors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cr-2. Producer or source: Universal Cyclops Steel Corporation.

ASTM A 533 Grade B is a manganese-molybdenum-nickel alloy steel for use in the quenched-and-tempered condition for plate for the construction of pressure vessels and other pressure equipment. It is used in 6 to 12-inch sections and is the most widely used steel for nuclear reactor pressure vessels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-328. Producer or source: Alloy steel mills and foundries.

NAS 254 NM has high chromium and molybdenum content and thus is resistant to harsh corrosive environments. The alloy is available in flat products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1083. Producer or source: Nippon Yakin Kogyo Company Ltd.

Carlson Alloy 904L is a 21Cr-24Ni-4.5Mo-1.5Cu low-carbon austenitic alloy that resists corrosion in a wide range of both oxidizing and reducing environments. It has good pitting and crevice-corrosion resistance and eliminates stress-corrosion cracking in most common chloride environments. The alloy resists intergranular corrosion in postwelded or stress-relieved conditions because of its very low carbon content. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-844. Producer or source: G.O. Carlson Inc.

Uranus 45N (UR 45N) is a nitrogen alloyed (>0.15%) austenitic-ferritic stainless steel (2205 type) with improved structural stability and high general, localized, and stress-corrosion resistance properties. The Pitting Resistance Equivalent Number (PREN) is >33. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on forming, heat treating, and joining. Filing Code: SS-653. Producer or source: Creusot-Marrel.

URANUS 45NMo is a nitrogen-alloyed austenitic/ferritic stainless steel with a designed pitting resistance equivalent number (PREN) of >=34. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-758. Producer or source: Creusot-Marrel.

NAS 224N has high nickel, chromium, and molybdenum and has excellent seawater resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1223. Producer or source: Nippon Yakin Kogyo Company Ltd.

ZIRCADYNE 705 is a zirconium-niobium (columbium) alloy which contains 2-3% niobium. Because of its excellent resistance to many corrosive media and its good mechanical and heat transfer properties, Zircadyne 705 has found widespread use in many chemical process applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-8. Producer or source: Teledyne Wah Chang Albany.

HUNTINGTON alloy 904L is an austenitic nickel-chromium-iron alloy with additions of molybdenum and copper. Its high nickel and chromium contents make it resistant to corrosion in a wide range of both oxidizing and reducing environments. The molybdenum and copper additions further improve its resistance to corrosion. Its mechanical properties are similar to those of other austenitic stainless steels. Applications of alloy 904I, include equipment for manufacture and use of sulfuric and phosphoric acids, for fertilizer production and for pulp and paper bleaching. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-433. Producer or source: Huntington Alloy Products Division, An INCO Company.

Nickel Alloy 600 is a nickel-base alloy intended for use in a wide range of applications from cryogenic to temperatures above 2000 F, where high-temperature properties and resistance to oxidation or corrosion are desired. This alloy has been used in nuclear, petroleum, chemical, food-processing, pharmaceutical and heat-treating industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-309. Producer or source: Nickel alloy producers.

E-BRITE 26-1 is a high-purity ferritic stainless steel produced by electron-beam melting. It combines excellent fabrication properties and weld-ability with good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-285. Producer or source: Licensees of Airco Vacuum Metals.

TIMETAL 50A is a commercially pure titanium alloy with a minimum tensile strength of 345 MPa (50 ksi). It is readily formed at room temperature, although complex shapes must be warm formed for satisfactory results. This material is weldable by both electrical resistance and fusion procedures, although the latter methods can be used only if the material is protected from atmospheric contamination. This grade is used in airframe and chemical process applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-120. Producer or source: Timet.

The 3Cr-1Mo-1/4V-Ti-B alloy was developed ato meet requirements for coal liquefaction reactor materials. The alloy is hydrogen resistant at high temperatures and pressures with excellent properties in thick section sizes and at high temperatures. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on heat treating and joining. Filing Code: SA-479. Producer or source: Sumikin Welding Industry.

ZIRCADYNE 702 is described as unalloyed zirconium despite the fact that it contains hafnium (4.5% max.) from its ore. Hafnium is very similar to zirconium metallurgically and chemically and is not detrimental to corrosion resistance and other characteristics of zirconium in most applications (except nuclear). Because of its excellent resistance to many corrosive media and its good mechanical and heat-transfer properties, Zircadyne 702 has found widespread use in many chemical process applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-7. Producer or source: Teledyne Wah Chang Albany.

ZIRCADYNE 704 is a zirconium-tin-iron-chromium alloy. Zircadyne 704 can contain up to 4.5% hafnium which is naturally present in the zirconium ore. The hafnium is very similar to zirconium metallurgically and chemically and is not detrimental to the corrosion resistance of Zircadyne 704 in chemical applications. Zircadyne 704 is used for high-pressure, high-temperature water and steam environments such as those in the nuclear power industry. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-9. Producer or source: Teledyne Wah Chang Albany.

INCOLOY Alloy 800H is a wrought austenitic alloy characterized by excellent strength and corrosion resistance at high temperatures. It has higher design strengths than the conventional stainless steels above 1100 F. It is heat treated for optimum creep and stress-to-rupture properties. It is approved for HTGR (High-Temperature Gas-Cooled Reactor) nuclear reactors and is recommended for many other high-temperature applications. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-347. Producer or source: Huntington Alloy Products Division, An INCO Company.

ZIRCALOY-3 is a zirconium-base alloy having good corrosion resistance and improved strength at temperatures up to about 750 F. It is recommended as a structural material for heat transfer in nuclear reactors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-5. Producer or source: Allegheny Ludlum Corporation.

CARLSON ALLOYS C600 AND C600 ESR have excellent mechanical properties from sub-zero to elevated temperatures with excellent resistance to oxidation at high temperatures. It is a solid-solution alloy that can be hardened only by cold working. High strength at temperature is combined with good workability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-470. Producer or source: G.O. Carlson Inc.

KB1-40 Alloy is a solid solution of 60% tantalum and 40% columbium (niobium). It costs much less than tantalum, yet it retains much of tantalum's excellent ability to resist chemical corrosion at high temperatures. It has higher tensile and yield strengths than tantalum and comparable ductility. Typical applications are heat exchangers, reactors, condensers and thermowells. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-7. Producer or source: Cabot Corporation.

JESSOP JS625 is a nickel-chromium-molybdenum-columbium alloy that is well suited for applications where strength and corrosion resistance are required. It has superior strength and toughness at temperatures ranging from cryogenic to 2000 F; also, it has exceptional fatigue strength. It is outstanding in resistance to corrosion either general or localized (pitting/crevice), is virtually immune to chloride-ionstress-corrosion cracking, and is highly resistant to oxidation. Among its many uses are aerospace applications, heat exchangers, nuclear-reactor components and power-plant flue-gas scrubbers. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-285. Producer or source: Jessop Steel Company.