Micro-Melt T15 Plus alloy is a high-speed powder metal tool steel. It may be considered for many types of tooling applications where either conventional or powder metal high-speed steels of either the M or T types are being used. This datasheet provides information on composition, physical properties, and hardness. It also includes information on wear resistance as well as forming, heat treating, and powder metal forms. Filing Code: TS-620. Producer or source: Carpenter Specialty Alloys.

Ancorsteel 2000 is a water atomized low-alloy powder metal containing Ni, Mo, and Mn and is useful in powder metal parts requiring greater hardenability. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-157. Producer or source: Hoeganaes Corporation.

FERRO-TITANIT C-SPEZIAL is one of a series of metal-matrix composites manufactured by a powder metallurgy process. Ferro-Titanit C-SPEZIAL contains 33% titanium carbide, one of the hardest and most resistant carbides. Because of its high wear resistance and low tendency towards cold welding, Ferro-Titanit is particularly used in forming and cutting tools. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and compressive and bend strength. It also includes information on wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: SA-812. Producer or source: Deutsche Edelstahlwerke GmbH.

Ancorsteel 721 SH is a water atomized, prealloyed steel powder specifically developed for sinter hardenings. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metal parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-155. Producer or source: Hoeganaes Corporation.

Carpenter CTS-B75P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless combined with excellent wear resistance and tempered hardness capability up to HRC 63. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: SS-1200. Producer or source: Carpenter Specialty Alloys.

Böhler (or Boehler) S393 is a high-speed steel made by the powder metallurgy process with excellent toughness and red hardness. This datasheet provides information on composition, physical properties, and hardness. It also includes information on surface qualities as well as forming, heat treating, machining, and powder metal forms. Filing Code: TS-751. Producer or source: Voestalpine High Performance Metals Corporation.

Micro-Melt M62 tool steel is produced by the Carpenter Micro-Melt powder metal process and is superior in toughness to conventional AISI Type M42 at similar hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance and wear resistance as well as forming, heat treating, and powder metal forms. Filing Code: TS-626. Producer or source: Carpenter Specialty Alloys.

STELLITE STAR J-METAL PM (UNS R30102) is a cobalt-base alloy recommended for handling severe conditions of abrasion, heat and corrosion. The PM designation indicates prealloyed atomized powders and parts made from the powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, joining, and powder metal forms. Filing Code: CO-93. Producer or source: Deloro Stellite Inc.

TRIBALOY T-800 consists of a hard, intermetallic phase in a softer, cobalt-base alloy matrix. It can be cast or hardfaced. As alloy powder it can be plasma sprayed or blended with other powders for P/M (Powder Metallurgy) processing. It has excellent resistance to crevice corrosion and it is less susceptible to stress-corrosion cracking than the austenitic stainless steels. T-800 combines outstanding resistance to corrosion and wear in numerous commercial environments. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Co-73. Producer or source: Tribaloy Products.

COLMONOY No. 22 is a nickel-base alloy supplied as atomized powder, welding rod and investment castings. The powder is applied with Colmonoy's FUSEWELD process to repair cast-iron parts. The investment castings are used in the glass industry as forming tools (plungers, baffles and sleeves) and as welding rod for repairing cast-iron glass-container molds and components. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as heat treating, machining, joining, and powder metal forms. Filing Code: Ni-242. Producer or source: Wall Colmonoy Corporation.

Micro-Melt 23 is a general-purpose alloy with a good combination of properties. This high-speed tool steel is made from powder with all its inherent values. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: TS-627. Producer or source: Carpenter Powder Technologies.

Vanadis 4 Extra is a high-alloyed powder metallurgical (PM) tool steel suitable for long-run tooling in applications with high demands on adhesive wear and chipping resistance. Due to the very carefully balanced alloying and the powder metallurgical manufacturing route, Vanadis 4 Extra has better machinability and similar heat treatment to AISI Type D2. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, surface treatment, and powder metal forms. Filing Code: TS-631. Producer or source: Böhler-Uddeholm North America.

Micro-Melt 420-CW is a powder-produced wear-resistant tool steel with corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: TS-676. Producer or source: Carpenter Powder Products.

Ancorsteel 4600V alloy is a water-atomized low-alloy sinter-hardening metal powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-655. Producer or source: Hoeganaes Corporation.

AncorMax 200 is a powder metal lubricant/binder system that can achieve higher densities with fewer processing steps. This datasheet provides information on physical properties, hardness, and tensile properties. It also includes information on powder metal forms. Filing Code: CS-174. Producer or source: Hoeganaes Corporation.

Carpenter CTS-BD30P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless, combined with excellent toughness and wear resistance attributed to a high concentration of vanadium carbides. The Carpenter CTS family of alloys is used for many blade applications. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating and powder metal forms. Filing Code: SS-1154. Producer or source: Carpenter Specialty Alloys.

AMETEK 820 alloy is a powder metallurgically produced strip that is used in hardfacing weld wire. The production process, however, can produce other special strip compositions such as the nickel-chromium alloys used as resistance alloys. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on powder metal forms. Filing Code: Ni-549. Producer or source: AMETEK Specialty Metal Products.

Crucible P/M 625M is a powder metallurgy produced alloy where the composition meets both high-strength and corrosion-resistance requirements. P/M 625M is a candidate for critical service industries such as nuclear power, chemical process, pulp, paper, and oil fields. This datasheet provides information on composition, microstructure, and hardness as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating and powder metal forms. Filing Code: Ni-554. Producer or source: Crucible Compaction Metals.

Crucible P/M N625 is a powder metallurgical nickel-base alloy with excellent corrosion resistance, high strength, chemical homogeneity, and thermal stability. Applications include use for highly corrosive situations in the marine, nuclear power, pulp and paper, and chemical process industries. This datasheet provides information on composition, microstructuretensile properties. It also includes information on powder metal forms. Filing Code: Ni-555. Producer or source: Crucible Compaction Metals.

The Sandvik grade Kanthal APMT is an advanced powder metallurgical resistance heating alloy of the family FeCrAlMo that has good form stability at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and powder metal forms. Filing Code: SS-1037. Producer or source: Kanthal AB and Sandvik Materials Technology.