Search Results for pistons

VANASIL is a high silicon, aluminum piston alloy having low density and low thermal coefficient of expansion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-69. Producer or source: Arrow Head Steel Products Company.

Induction hardened Cromax IH 482 is based on a medium carbon, microalloyed steel, which is characterized by high strength in the as-rolled condition, i.e., without heat treatment. The alloy is used for the manufacture of piston rods, pistons, and eyes for hydraulic cylinders. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance and surface qualities as well as forming, machining, and joining. Filing Code: SA-742. Producer or source: Ovako Cromax AB.

ALUMINUM 222.0 is an age-hardenable aluminum alloy for sand and permanent mold castings. It is hard and wear resistant and has good strength at elevated temperatures. Applications include cylinder heads and pistons. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-211. Producer or source: Various aluminum companies.

AISI 8617 is a low-carbon nickel-chromium-molybdenum carburizing steel of good hardenability. Its core is characterized by good strength and toughness. It is recommended for heavy-duty applications such as cams, chains, fasteners, gears, shafts and piston pins. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-315. Producer or source: Alloy steel mills and foundries.

Ovahyd 450 is a steel developed for highly stressed cylinder and piston rod applications in the hydraulic industry. The yield strength (MPa) corresponds to the alloy name. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, machining, and joining. Filing Code: SA-544. Producer or source: Ovako Steel Inc.

Ovako 225A is an alloy designed for nitriding applications such as piston rods. This datasheet provides information on composition and tensile properties. It also includes information on forming and machining. Filing Code: SA-549. Producer or source: Ovako Steel Inc.

MEEHANITE GB is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, lathe beds, bases, pistons, crankshafts, camshafts, and general engineering castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: CI-22. Producer or source: Meehanite Metal Corporation.

MEEHANITE GC is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, permanent molds, lathe beds, bases, pistons, and engine castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on heat treating and machining. Filing Code: CI-8. Producer or source: Meehanite Metal Corporation.

FEDERATED F1121 Ni is a heat-treatable aluminum-silicon-nickel-copper-magnesium alloy used for high-strength permanent-mold castings. It can be solution treated and aged, or the as-cast material can be aged to increase hardness and strength. Its uses include pistons and pulleys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-225. Producer or source: Federated Metals Corporation, ASARCO Inc..

ALUMINUM 2018 is an age-hardenable aluminum forging alloy characterized by relatively high tensile and yield strengths along with fairly good ductility. It has good elevated-temperature properties. Its applications include engine pistons and engine cylinder heads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-130. Producer or source: Various aluminum companies. Originally published October 1963, revised May 1979.

AISI 8622 is a low-carbon triple-alloy steel of moderate-to-good hardenability for carburizing and other applications. Its core is characterized by good strength and toughness. When carburized it is recommended for heavy-duty applications such as cams, gears, shafts and piston pins. It is suitable also for many engineering applications when normalized or quenched and tempered. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-351. Producer or source: Alloy steel mills and foundries.

Copper Alloy No. 922 is a cast copper-tin-zinc-lead alloy formerly identified as Navy M or 88-6-1.5-4.5 alloy. It possesses a good combination of machinability, strength and resistance to corrosion. Alloy No. 922 is a good material to use in castings subject to liquid or gas pressures. Its many uses include valves, piston rings and pump impellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-382. Producer or source: Copper alloy foundries.

CARPENTER 80-20 ALLOY is a nickel-chromium alloy intended for service at high temperatures. It offers good corrosion resistance to exhaust gases in aircraft piston engines. Considerable quantities of this alloy have been used as welded overlays on valve heads for aircraft engine exhaust valves. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-264. Producer or source: Carpenter.

Copper Alloy No. C92700 is a cast copper-base alloy; it formerly was known as 88-10-2-0 alloy. It is characterized by a good combination of machinability, strength and resistance to corrosion. Among its many uses are bearings, pump impellers, piston rings and valve parts that are subject to liquid and or gas pressure and, therefore, must be sound (free from defects). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-477. Producer or source: Copper alloy foundries.

Copper Alloy No. C92800 is a cast bronze containing nominally 16% tin and 5% lead. Former commercial names (not recommended) are (1) 295, (2) Leaded Tin Bronze, (3) Ring Metal and (4) 79-16-5-0. It has excellent machinability, moderate strength and good resistance to corrosion. A typical use is piston rings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-490. Producer or source: Copper alloy foundries.

ALUMINUM 336.0 is a high-silicon aluminum-base alloy recommended for high-strength permanent-mold castings. It responds to an age-hardening heat treatment. Its applications include automotive and diesel pistons, pulleys and sheaves. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-266. Producer or source: Various aluminum companies.

UNS No. A02220 is an age-hardenable aluminum casting alloy. It is hard and wear resistant and has good strength at elevated temperatures. It has good foundry characteristics in many respects and is produced as sand and permanent-mold castings. Among its applications are bushings, automotive cylinder heads and pistons. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-272. Producer or source: Various aluminum companies.

ALUMINUM D132 is an aluminum permanent mold casting alloy recommended for applications where good high-temperature strength, low coefficient of thermal expansion, and good resistance to wear are required, such as automotive and diesel pistons. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-167. Producer or source: Aluminum Company of America.

AISI 8615 is a low-carbon, nickel-chromium-molybdenum alloy steel capable of producing high core strength and toughness. It is a case hardening steel recommended for heavy duty gears, cams, shafts, chains, fasteners, piston pins, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-180. Producer or source: Alloy steel mills and foundries.

Silafont-7 is an aluminum piston alloy for sand, permanent mold and die castings. It has high strength, particularly good hot-crack resistance and limited corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-150. Producer or source: Swiss Aluminium Ltd.