TIMETAL 3-2.5 (Ti-3%Al-2.5%V) alloy is cold formable and weldable. This alloy is used primarily for honeycomb foil and hydraulic tubing applications. Industrial applications, such as pressure vessels and piping, also utilize this alloy. The alloy is available with palladium stabilization to enhance corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on heat treating. Filing Code: TI-114. Producer or source: Titanium Metals Corporation (Timet).

SSC Invar 36 was developed for use in applications where dimensional stability is essential. It is a nickel-iron alloy with a very low coefficient of thermal expansion from cryogenic temperatures to 200 deg C (390 deg F). It is utilized in aerospace composite tooling and die applications, as well as laser components, and cryogenic components and piping: liquefied natural gas production, storage, and transportation. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: Fe-158. Producer or source: Sandmeyer Steel Company. Originally published December 2011, revised February 2012.

DYNA-LOY 41L49 is a cold-drawn alloy steel recommended for those applications that require a hardness range of Rockwell C 43 to 56 and excellent machinability. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 175,000 to 300,000 psi. Its many uses include shafts, pipe reamers and special bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-342. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

EASTERN STAINLESS Type 347 contains an addition of columbium which produces a stabilized type of stainless steel free from the chromium carbide precipitates that cause intergranular corrosion. It is recommended for welded parts which cannot be annealed after welding. It is also used for parts which are intermittently heated and cooled to temperatures between 800 and 1600 F. Its many applications include exhaust manifolds, expansion and high-pressure steam pipes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-390. Producer or source: Eastern Stainless Steel Company.

INDALLOY 158 is a bismuth-base, eutectic alloy that has a melting point of 158 F (70 C). It is an easily castable material that is ready for use as soon as it freezes. It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it of great use in industry for such applications as sprinkler and fire safety devices, support for bending pipe and tubing, anchoring aircraft parts for machining, and seals for annealing and nitriding furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-27. Producer or source: Indium Corporation of America.

Copper Alloy No. C84200 is a free-cutting copper-zinc-tin-lead alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. Formerly used named (not recommended) are 101, Leaded Semi-Red Brass and 80-5-2.5-12.5. Typical applications are pipe fittings, bushings, locknuts and unions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-446. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-450, December 1982.

Bismuth-26.7Pb-13.3Sn-10Cd is a bismuth-base, eutectic alloy that is melted and cast easily and is ready for use as soon as it freezes. It has a melting point of 158 F (70 C). It can be recovered easily and recycled into new uses any number of times. Its low melting temperature and controlled-shrinkage characteristics make it of great use in industry for such applications as sprinkler and fire safety devices, support for bending pipe and tubing, anchoring aircraft parts for machining, and seals for annealing and nitriding furnaces. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-32. Producer or source: Producers of low-melting alloys.

SANDVIK Sanicro 28 is an all-purpose low-carbon stainless steel alloy for service in highly corrosive environments. It has exceptionally high resistance to various types of corrosive attack and has good weldability. Among its numerous applications are evaporator tubes in the production of phosphoric acid; down-hole tubulars in deep, sour gas wells; piping and heat-exchanger tubes in sulfuric acid service and seawater cooled heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-442. Producer or source: Sandvik. See also Alloy Digest SS-831, September 2001.

AVESTA 254 SMO was developed for use in halide-containing environments. Its high molybdenum content, along with the copper addition, provides a material with excellent resistance to pitting and crevice corrosion as well as good general corrosion resistance, especially in halide-containing acids. In addition, its high nitrogen content results in superior strength when compared with other austenitic stainless steels. Typical applications for Avesta 254 SMO involve seawater contact, scrubbers and high-halide level tanks and piping. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-445. Producer or source: Aluminum alloy mills.

Copper Alloy No. C61300 is a copper-aluminum-tin alloy. It is characterized by medium strength, medium ductility and a good capacity for being hot worked or cold worked. It has good resistance to corrosion. Its many applications include bolts, nuts, corrosion-resistant vessels, machine parts, piping systems, marine fasteners and blending chambers for munitions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-493. Producer or source: Copper and copper alloy mills.

Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

Croloy 16-1 is a stainless steel, available as tubing or pipe, and recommended as a substitute for Type 300 stainless steels for applications where chloride stress-corrosion cracking is a problem. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-180. Producer or source: Babcock & Wilcox Company.

ESSHETE CRM2 is a low alloy corrosion and oxidation resistant steel suitable for moderately high 1100 F (593 C) temperature applications such as steam piping and superheater tubes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-220. Producer or source: Luria Steel & Trading Corporation (Agent).

SILICO ALLOY is a silicon-manganese shock-resisting tool steel; it has high toughness at relatively high operating hardnesses. It is primarily an oil-hardening steel because of its molybdenum content (0.45%); however, it may be water hardened. It is a low-cost, high-quality steel that combines high toughness with the advantages of oil-hardening non-deforming steels. Its relatively high hardenability coupled with high toughness makes it extremely useful for larges shear blades in severe service. Other applications include pneumatic tools, punches, hand chisels, rivet sets and pipe cutters. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-473. Producer or source: Columbia Tool Steel Company.

V and M T/P92 is a ferritic alloy with improved high-temperature strength and creep behaviors compared to those of other ferritic steel alloys. Applications include both superheater tubes and main steam piping in advanced boilers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SA-509. Producer or source: Vallourec & Mannesmann Tubes Corporation.

Aurubis C12200 (Cu-DHP) is a phosphorus-deoxidized copper, that contains a minimum of 99.9% copper and high residual phosphorus (0.015–0.040%). It is the most widely used copper for tube and pipe but also finds widespread use for sheet and strip items. Aurubis C12200 exhibits better ductility than Cu-ETP and is adaptable for progressive drawing operations requiring few or no intermediate anneals. A major advantage of Aurubis C12200 is the freedom from hydrogen embrittlement susceptibility in reducing atmospheres. This advantage is utilized in the cladding of steel and subsequent reducing atmosphere anneals without incurring the embrittlement, which occurs when cladding with Cu-ETP. The electrical and thermal conductivity are lower when compared with Cu-ETP but adequate for many applications as exemplified by a major use of strip to produce air conditioning and refrigeration tubing by gas shielding arc welding techniques. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-934. Producer or source: Aurubis AG.

ALUMINUM 3003 is a wrought non-heat-treatable aluminum alloy with excellent resistance to corrosion. It is used widely in deep-drawing and forming applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-31. Producer or source: Various aluminum companies. Originally published September 1955, revised December 1973.

CARPENTER 7-Mo PLUS is a duplex stainless steel of austenite in a ferrite matrix. It is superior to 300 series stainless steels like types 304 and 316 in strength, corrosion, pitting and stress-corrosion cracking resistance (to chlorides). Typical applications are heat exchangers in the chemical and petrochemical industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-608. Producer or source: Carpenter.

B and W IRON is a thoroughly killed, low carbon steel having a combination of ductility, toughness and high magnetic permeability. It is recommended for applications where good magnetic characteristics are of primary significance, such as in the manufacture of electric motor and generator housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-35. Producer or source: Babcock & Wilcox Company.

Bridgeport Alloy 77 is a modified copper-zinc brass having improved resistance to bio-fouling, dezincification, and other forms of copper attack. It is recommended for condenser and heat exchanger tubes for marine use. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-111. Producer or source: Bridgeport Brass Company.