AISI Type 502 is a corrosion and heat resisting 5% chromium alloy steel. It is generally used in the annealed condition only. It is recommended for oil refinery and chemical plant equipment, oil pump impellers, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-211. Producer or source: Stainless steel mills.

AISI Type 501 is a low-chromium type corrosion steel that is used for its heat resistance and good mechanical properties at elevated temperatures as well as for its corrosion resistance at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-119. Producer or source: Stainless steel mills.

USS 5, Type 501, and 5S, Type 502, contain approximately 5% chromium and 0.50% molybdenum. They resist corrosion and oxidation at elevated temperatures and are particularly adaptable to applications in the petroleum refinery industry. Type 502 contains slightly lower carbon and is used for applications where better weldability is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-22. Producer or source: United States Steel Corporation.

Copper Alloy No. 858 is a copper-zinc-tin-lead (yellow brass) alloy for die castings. It is a low-cost, general-purpose alloy with good machinability and soldering characteristics. Its many uses include general and marine hardware, pump, impellers, plumbing parts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-354. Producer or source: Copper alloy producers.

Copper Alloy No. 923 is a cast copper-tin-zinc-lead alloy known also as Leaded G Bronze or 87-8-1-4 alloy. This alloy possesses a good combination of strength, resistance to corrosion and machinability. It is a good alloy to withstand gas or liquid pressures. Applications include pump impellers, fittings and bearings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-355. Producer or source: Copper alloy foundries.

Copper Alloy No. C92700 is a cast copper-base alloy; it formerly was known as 88-10-2-0 alloy. It is characterized by a good combination of machinability, strength and resistance to corrosion. Among its many uses are bearings, pump impellers, piston rings and valve parts that are subject to liquid and or gas pressure and, therefore, must be sound (free from defects). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-477. Producer or source: Copper alloy foundries.

AUR-O-MET 145 is a silicon bronze die casting alloy having good castability and good weldability. It is suitable for gears, valve parts and marine fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: Cu-154. Producer or source: Aurora Metal Company.

BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

Copper Alloy No. 922 is a cast copper-tin-zinc-lead alloy formerly identified as Navy M or 88-6-1.5-4.5 alloy. It possesses a good combination of machinability, strength and resistance to corrosion. Alloy No. 922 is a good material to use in castings subject to liquid or gas pressures. Its many uses include valves, piston rings and pump impellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-382. Producer or source: Copper alloy foundries.

Copper Alloy No. 878 is a copper-zinc-silicon alloy for die castings. Among the brass die-casting alloys, it has the highest strength, hardness and wear resistance; however, it is the most difficult to machine. It is used where very high requirements must be met for strength and wear resistance. Its many applications include tools, pump impellers, gears and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-386. Producer or source: Copper alloy producers.

ILLIUM 98 is a machinable, nickel-base casting alloy, highly corrosion resistant to many media. While originally designed for hot sulfuric acid service, it has proven to be an extremely wide range corrosion resistant material. This datasheet provides information on composition, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-96. Producer or source: Stainless Foundry & Engineering Inc..

BERYLCO Alloy 41C is a highly castable, air-melting nickel-base alloy; it is precipitation-hardenable to high strength and hardness. It exhibits excellent resistance to wear, corrosion and oxidation. Alloy 41C (formerly called Berylco CR-1, Alloy Digest Ni-27, September 1956) is the standard beryllium-nickel casting alloy that has been in use for over 40 years. Its many uses include tooling for plastics, glass-mold tooling, fuel-pump impellers, cores for Teflon molding and deep sour-well drilling components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-251. Producer or source: Kawecki Berylco Industries Inc..

Copper Alloy No. 903 is a cast copper-tin-zinc alloy known also as G Bronze or 88-8-0-4 alloy. It has a good combination of strength and corrosion resistance and is often used in castings subject to liquid or gas pressures. Among its many uses are valves, pumps, bushings and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-345. Producer or source: Copper alloy foundries.

AMPCOLOY 711 is a medium-strength casting alloy; its typical tensile strength is 55,000 psi in the as-cast condition. It has a good combination of strength, ductility and resistance to corrosion. Among its many uses are bushings, gears, pumps, propellers, valves and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-403. Producer or source: Ampco Metal Inc..

Copper Alloy No. C96600 is a cast copper-tin-lead-zinc alloy also known as 87-10-1-2 alloy. It is characterized by a good combination of strength, machinability and resistance to corrosion. This alloy is often used to make castings for valves and pumps which are subject to liquid and gas pressure and, therefore, must be free from internal porosity, shrinkage or other defects. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-410. Producer or source: Copper alloy foundries.

AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

Copper Alloy no. C90500 is a cast copper-tin-zinc alloy known also by names formerly used (not recommended): Gun Metal, 210, Tin Bronze and 88-10-0-2. It has a good combination of strength and resistance to corrosion. Because of its mechanical properties and corrosion resistance, it is used frequently in castings that are subjected to liquid or gas pressure, such as those in valves, pumps, etc. It also is used for bearings and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-432. Producer or source: Copper alloy foundries.

Cooper Alloy 14S is an abrasion, heat and corrosion resistant alloy steel containing 12% chromium. It can be hardened by heat treatment. It is recommended for pumps and valves in the cast form. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-158. Producer or source: Cooper Alloy Corporation.

MONEL alloy 506 is an intermediate cast nickel-copper alloy that has higher hardness than cast Monel alloy 410 and better machinability than Monel alloy 505. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-73. Producer or source: Huntington Alloy Products Division.