Carlson alloy 926 Mo is a superaustenitic 6% Mo stainless steel that resists highly corrosive environments and has excellent chloride pitting, crevice, and stress-corrosion cracking resistance. It can be utilized where the performance of conventional austenitic stainless steels is bor-derline, or as a cost-effective substitute for nickel alloys. The higher mechanical properties that allow designs with thinner sections than con-ventional stainless steels are highly desired for oil platforms. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: SS-842. Producer or source: G.O. Carlson Inc., Electralloy.

Carpenter Micro-Melt CCW alloy joins Carpenter’s extensive list of specialty materials with a combination of corrosion and wear resistance. The alloy is produced by gas atomization. This datasheet provides information on composition. It also includes information on corrosion and wear resistance as well as forming, machining, and powder metal forms. Filing Code: CO-116. Producer or source: Carpenter Technology Corporation.

HIDURON alloy 191 was developed for marine applications where both a combination of strength and good corrosion/ impingement resistance is needed. It finds applications in shafts, fasteners and valve stems. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-601. Producer or source: Langley Alloys Ltd.

The AL-6XN PLUS alloy is an enhanced version of the AL-6XN alloy (see Alloy Digest SS-494, May 1988). Both satisfy the composition requirements of UNS N08367, but AL-6XN PLUS contains a greater concentration of the alloying elements (Cr, Mo, and N) which promote corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-923. Producer or source: Allegheny Ludlum Corporation. Originally published April 2005, revised June 2005.

Lukens 690Z is a quenched and tempered steel of high strength but with low-carbon to obtain good toughness. The alloy meets mobile offshore drilling platform requirements. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: SA-527. Producer or source: International Steel Group Inc.

IN-787 is an age-hardenable, high-strength structural steel. It is characterized by low-temperature toughness, good atmospheric corrosion resistance and excellent weldability, even under adverse field conditions such as line-pipe welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-286. Producer or source: International Nickel Company Inc..

Electralloy EC32750 is super duplex stainless steel alloy providing excellent resistance to aqueous corrosion, coupled with good strength and pitting resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1075. Producer or source: Electralloy, A Division of G.O. Carlson Inc.

ATI corrosion-resistant commercially pure (CP) titanium represents a family of unalloyed (Grades 1, 2, 3 and 4) and palladium alloyed (Grades 7, 11, 16 and 17) CP titanium that is produced as plate, sheet and strip. It is the material of choice for many corrosive chemical environments, including oxidizing chloride solutions (such as seawater) and chlorine-based bleaches. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Ti-162. Producer or source: ATI.

Allegheny Ludlum CP chemically pure titanium alloys feature low density and high strength-to-weight ratio. They are suitable for many corrosive chemical environments, including oxidizing chloride solutions, seawater, and chlorine-based bleaches. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming and joining. Filing Code: TI-115. Producer or source: Allegheny Ludlum Corporation. Originally published September 2000, corrected November 2000.

Electralloy EC25540 is a super duplex stainless steel alloy providing excellent resistance to aqueous corrosion and a restricted chemistry to ensure a minimum PREN of 40. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1179. Producer or source: Electralloy, a Division of G.O. Carlson Inc..

Uranus 28 is a super-austenitic steel with very high nickel and chromium contents. This datasheet provides information on composition, physical properties, hardness, elasticity, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1187. Producer or source: Industeel USA, LLC.

90-10 Cupro-nickel is a highly ductile, malleable and corrosion resisting alloy, suitable for water applications. The alloy has approximately 1.4% iron to improve its resistance to sea water. It has good resistance to general corrosion and erosion. Easily fabricated. Readily weldable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance. Filing Code: CU-600. Producer or source: G.O. Carlson Inc.

Forta SDX 100 is a super duplex stainless with molybdenum, tungsten, and high mechanical properties. It is designed for demanding applications for both corrosion resistance and strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1269. Producer or source: Outokumpu Stainless AB, Avesta Research Centre.

Outokumpu 2507 is a super duplex stainless with molybdenum and high mechanical properties. It is designed for demanding applications for both corrosion resistance and strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1215. Producer or source: Outokumpu Stainless AB, Avesta Research Centre.

Mi-Tech high-density (HD) metals are high-strength, machinable, tungsten-base materials used where high density and strength are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining and joining. Filing Code: W-20. Producer or source: Mi-Tech Metals Inc.

Avesta Sheffield SAF 2507 is an austenitic/ferritic duplex stainless steel with very high strength. The alloy has a lower coefficient of thermal expansion and a higher thermal conductivity than austenitic stainless steels. The alloy has a high resistance to pitting, crevice, and general corrosion; it has a very high resistance to chloride stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-652. Producer or source: Avesta Sheffield Inc.

DMV 928 is a nickel-base alloy with high alloying elements of chromium, molybdenum, and copper for excellent corrosion resistance in reducing and oxidizing media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1048. Producer or source: Mannesmann DMV Stainless USA Inc.

VDM 625 (Nicrofer 6020 hMo) is a nickel-chromium-molybdenum-niobium alloy with excellent resistance to a variety of corrosive media. In the soft annealed condition (grade 1), the alloy is used for wet corrosion applications and is approved by TÜV for pressure vessels in a temperature range from –196 to 450 °C (–320 to 840 °F). For high temperature applications above 600 °C (1110 °F), the solution annealed variant (grade 2) is generally used. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-760. Producer or source: VDM Metals GmbH.

Uranus 31 is a super-austenitic steel with very high nickel, chromium, and molybdenum content. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1191. Producer or source: Industeel USA, LLC.