Skip Nav Destination
Search Results for nuclear power plant applications
1-20 of 31 Search Results for
nuclear power plant applications
Alloy Digest (1967) 16 (7): Zr-3.
Published: 01 July 1967
... ZIRCALOY-2 is a zirconium alloy recommended as a structural material for heat transfer in nuclear reactors. Its use is limited to 750 F operation. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as...
Alloy Digest (1997) 46 (6): Ni-528.
Published: 01 June 1997
... NUCALLOY ALLOYS 453 and 488 are nickel-base hardfacing alloys designed to replace the traditional cobalt alloys for nuclear plant applications. These alloys have been used in Japanese commercial nuclear power plant service. This datasheet provides information on composition, physical properties...
Alloy Digest (1983) 32 (4): Ni-285.
Published: 01 April 1983
... outstanding in resistance to corrosion either general or localized (pitting/crevice), is virtually immune to chloride-ionstress-corrosion cracking, and is highly resistant to oxidation. Among its many uses are aerospace applications, heat exchangers, nuclear-reactor components and power-plant flue-gas...
Alloy Digest (1972) 21 (6): Cb-19.
Published: 01 June 1972
... COLUMBIUM, also called niobium, has excellent resistance to corrosion in many severe environments and its low thermal neutron-capture cross-section leads to applications in nuclear power plants. This datasheet provides information on composition, physical properties, elasticity, and tensile...
Alloy Digest (2011) 60 (6): SA-626.
Published: 01 June 2011
... DIWA 393 is used where combined resistance to elevated temperatures up to 375 C (707 F) and elevated pressures is required, in nuclear power plant engineering, for example, in urea and methanol production, and in the manufacture of synthetic fuels. This steel is supplied in waterquenched and...
Alloy Digest (1994) 43 (12): SS-576.
Published: 01 December 1994
... NOREM alloys can he considered for field applications in both nuclear and fos- sil power plants. Welding procedures for the use of NOREM have been and continue to be developed and qualified by valve vendors and in-situ valve service com- panies. Studies are continuing at the EPRI NDE Center to develop...
Alloy Digest (1999) 48 (6): Ni-554.
Published: 01 June 1999
... Crucible P/M 625M is a powder metallurgy produced alloy where the composition meets both high-strength and corrosion-resistance requirements. P/M 625M is a candidate for critical service industries such as nuclear power, chemical process, pulp, paper, and oil fields. This datasheet provides...
Alloy Digest (2004) 53 (9): SA-138.
Published: 01 September 2004
... 10269 (1999), 42CrMo5-6, Steel No.1.7233 (unless stated otherwise data in Tables 1 8 are in accordance with this standard) BS 1506 631-850 UK nuclear industry CEGB GDCD STD4 ISS1 BS 4882 General Characteristics: This alloy is a 1% Cr steel for bolting applications up to 480 °C (895 °F). The alloy has a...
Alloy Digest (1994) 43 (10): Ni-467.
Published: 01 October 1994
... was annealed at 1040°C (WOOoF). 20 min/WQ. General Characteristics: Sandvik Sanicro 69 is an austenitic nickelchromium-iron al- loy used primarily for steam gglerators in nuclear power plants (PWR) and other appkations where resistance against stress corrosion cracking is essendal. Since Saniao 69 is...
Alloy Digest (1983) 32 (5): SS-425.
Published: 01 May 1983
... conventional practices. Forms Available: Seamless tube, plate, strip, rod and forgings. Applications: .4 few typical applications where CRONIFER 1713 LCN has performed successfully include fatty acid plants, bleaching plants, nuclear evaporator plants and equipment using aqueous chloride solutions...
Alloy Digest (1977) 26 (1): SA-328.
Published: 01 January 1977
...: ASThl A 533 Grade B is a manganese-molybdenum-nickel steel u.hich is the most widely used plate (varying from -I to I2 Inches in thickness) for fabricating pressure vessels and other pressure equipment for nuclear power plants. This steel is used in the quenched-and-tempered condition at a tensile...
Alloy Digest (1996) 45 (7): Ni-513.
Published: 01 July 1996
... corrosion in suhidixing atmospheres. Nicrofer 6030 is particularly resistant to stress-corrosion crack- ing in the primary waters of nuclear power plants, certain mix- tures of nitric acid and hydrofluoric acid. It demonstrates remark- able behavior in concentrated (98.5%) sulfuric acid. even at...
Alloy Digest (1969) 18 (12): Ni-149.
Published: 01 December 1969
..., strip and weld wire. Applications: Pumps and control rod drive mechanisms both in and outside the core of nuclear plants, turbine components. Manufacturer: Carpenter Technology Corporation Reading, Pennsylvania - - working can be done and continued as low at 16000F. Best bending range is 2250-1900oF. Do...
Alloy Digest (1969) 18 (5): Zr-5.
Published: 01 May 1969
... ZIRCALOY-3 is a zirconium-base alloy having good corrosion resistance and improved strength at temperatures up to about 750 F. It is recommended as a structural material for heat transfer in nuclear reactors. This datasheet provides information on composition, physical properties, hardness...
Alloy Digest (1966) 15 (4): SS-180.
Published: 01 April 1966
...: Pipe, cubes, bars, and welding electrodes. Applications: Marine and nuclear power plants, oil refinery and chemical plant equipment, tubular hear exchangers. Manufacturer: The Babcock % Wilcox Company Tubular Products Division Beaver Falls, Pennsylvania ...
Alloy Digest (1982) 31 (10): Ni-279.
Published: 01 October 1982
... applica- tions where good elevated-temperature properties and resistance to wear, corrosion and oxidation are important. However, where nuclear power plants are involved, cobalt-base alloys are not desir- able either in primary or secondary loops and Alloy 42C often makes an excellent substitute. In...
Alloy Digest (1985) 34 (3): Cu-493.
Published: 01 March 1985
... equipment (mixing troughs and blending chambers). Typical end uses for this alloy comprise tubesheets for condensers in both nuclear and fossil-fueled power stations. cooling tower transfer piping, seawater piping for secondary cooling systems in nuclear power plants. and piping for geothermal heat transfer...
Alloy Digest (2004) 53 (8): SS-905.
Published: 01 August 2004
... stations, water-cooling devices for nuclear power sta- tions, penstock wear plates, valve-gate components, antiseismic plates for nuclear power stations. Castings of Virgo 39 alloy are used for Pelton wheels, Francis wheels, and Kaplan blades. Producer: USA: Industeel USA, LLC. 725 Lancaster Avenue, Suite...
Alloy Digest (1976) 25 (12): SS-335.
Published: 01 December 1976
... carbonate, calcium lactate, potable water, sea water, steam and sulfites. It has been employed successfully in the following industries: chemical, copper mining, food processing, paper mill, petroleum, pipe line, power plant (fossil fuel, hydro and nuclear) and water supply. Specification Equivalents: ASTM...
Alloy Digest (2004) 53 (1): SS-898.
Published: 01 January 2004
... in nuclear sys- tems and other balance-of-plant systems. Producer: J & L Specialty Steel, LLC Arcelor Group Pittsburgh, PA 15230-3373 (412) 375-1600 (800) 553-9235 ISSN: 002-614X SS-898B ...