Skip Nav Destination
Search Results for nuclear components
1-20 of 105 Search Results for
Alloy Digest (1980) 29 (3): SA-369.
Published: 01 March 1980
... wear and corrosion at temperatures up to 1100oF. It is a powder-metalhrrgy (P-M) product with a fully dense, wrought structure made possible by a process that Includes hot extrusion of canned, pre-alloyed powddr. It is used for high-temperature components such as bearings and bushings. *NUCLEAR METALS...
Alloy Digest (1965) 14 (9): W-10.
Published: 01 September 1965
... CHASE 75 W-25 Re is a tungsten-rhenium ultra-high temperature alloy recommended for temperatures up to 5000 F. It is used for power and electron tube components, heat exchangers, thermocouples and thermocouple protection tubes, nuclear reactor and power generation components and in general any...
Alloy Digest (1970) 19 (1): W-15.
Published: 01 January 1970
... WahChang W-25Re is a tungsten-rhenium alloy recommended for uses where high reliability at high temperatures and ductilities at low temperatures are required, such as, xray targets, cladding, thermocouples, nuclear and aerospace components. This datasheet provides information on composition...
Alloy Digest (1978) 27 (1): Ni-253.
Published: 01 January 1978
.... It has a wide range of applications among which are aerospace components, specialized sea-water equipment and nuclear power equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature...
Alloy Digest (1983) 32 (4): Ni-285.
Published: 01 April 1983
... outstanding in resistance to corrosion either general or localized (pitting/crevice), is virtually immune to chloride-ionstress-corrosion cracking, and is highly resistant to oxidation. Among its many uses are aerospace applications, heat exchangers, nuclear-reactor components and power-plant flue-gas...
Alloy Digest (1976) 25 (11): Ni-236.
Published: 01 November 1976
... is derived from the presence of hard nickel borides (and to a lesser extent chromium carbides) tightly held in a tough nickel-rich matrix. Among its many uses are cylinder liners, glass plant applications and valve components for nuclear applications. This datasheet provides information on...
Alloy Digest (1971) 20 (11): W-17.
Published: 01 November 1971
... CRM TUNGSTEN-35 Re-18 Mo is a high-melting alloy for applications such as electronic tube components, electrical contacts, nuclear equipment, rocket thrusters, thermocouples and heating elements. All products are produced by powder metallurgy. This datasheet provides information on composition...
Alloy Digest (1968) 17 (1): Cb-14.
Published: 01 January 1968
... Columbium SCB-291 is a columbium-base alloy having excellent high temperature properties and good fabricability. It is recommended for nuclear reactors, space vehicles, jet and missile components. This datasheet provides information on composition, physical properties, hardness, and tensile...
Alloy Digest (1987) 36 (1): Be-3.
Published: 01 January 1987
... electronic components fracture toughness heat treatability instrumentation applications joinability machinability nuclear reactors optical applications physical properties tensile properties workability X-ray windows BRUSH WELLMAN S-65B Filing Code: Be-3 Beryllium JANUARY 1987 - DATA ON WORLD...
Alloy Digest (2003) 52 (7): Ni-610.
Published: 01 July 2003
... material is used for fabrication and repair of nuclear components and exhibits good resistance to root cracking. Because of good wet- ting and clean welds, this material is ideal for remote-controlled multipass welds in hot repair situations. Product Forms Available: The filler metal is available in 1.14...
Alloy Digest (1979) 28 (8): Co-76.
Published: 01 August 1979
..., and nuclear components. Manufacturer: Superior Tube Company Norristown, Pennsylvania 19404. ...
Alloy Digest (1997) 46 (9): Be-9.
Published: 01 September 1997
... advanced missiles, and satellites. Beralcast offers an altema- tive candidate materid to save cost aud weight in applications where aluminum and titanium castings. and machined beryllium components are used. Producer: Nuclear Metals Inc. 2229 Main St Concord, MA 0 1742 (978) 369-5410 (978) 3694045 (fax...
Alloy Digest (1994) 43 (7): Ni-457.
Published: 01 July 1994
... manufactur- ers of nuclear reactors. Also good in other media, de- pending on base metal and brazing cycle. Specific tests should be conducted in most cases. General Characteristics: Nicrobraz 30 is ideal for joining components used in nuclear reactor hot zones and for other high temperature, high stress...
Alloy Digest (1999) 48 (7): Ni-555.
Published: 01 July 1999
... Crucible P/M N625 is a powder metallurgical nickel-base alloy with excellent corrosion resistance, high strength, chemical homogeneity, and thermal stability. Applications include use for highly corrosive situations in the marine, nuclear power, pulp and paper, and chemical process industries...
Alloy Digest (1979) 28 (11): SS-369.
Published: 01 November 1979
... heavy-water manufacture, nuclear, petrochemical, pipe line, power, pulp and paper, printing and textiles. Typical end uses for this alloy are castings for dying equipment, flow-meter components, propellers, pump parts, valve bodies and valve parts. Manufacturers: Foundries that produce stainless steel...
Alloy Digest (1987) 36 (5): Be-4.
Published: 01 May 1987
...: Rod, bar. tube. billet, wire, extrusions, near net shapes and powder. Applications: Brush Wellman S-2OOF can be used as follows: (I) Optical (mirrors, substrates, benches and telescopes), (2) Nuclear reactors (reflector and moderator elements), (3) Audio components, (4) High-speed computer parts and...
Alloy Digest (1996) 45 (7): Ni-513.
Published: 01 July 1996
... Nicrofer 6030 (alloy 690) is a nickel-chromium-iron-alloy with high chromium content (30%) to resist both oxidizing environments and primary and secondary water in PWR nuclear systems. This datasheet provides information on composition, physical properties, and elasticity. It also includes...
Alloy Digest (1985) 34 (1): Ni-309.
Published: 01 January 1985
... Nickel Alloy 600 is a nickel-base alloy intended for use in a wide range of applications from cryogenic to temperatures above 2000 F, where high-temperature properties and resistance to oxidation or corrosion are desired. This alloy has been used in nuclear, petroleum, chemical, food-processing...
Alloy Digest (1974) 23 (1): Zr-6.
Published: 01 January 1974
... contamination of the reactor coolant water is significantly lower for the Nbcontaining alloys than for the Ziicaloys and, in addition, hydrogen absorption is lower. Applications: Nuclear reactor components and chemical processing industry equipment requiring high strength and corrosion resistance. Manufacturer...
Alloy Digest (1975) 24 (9): Ni-221.
Published: 01 September 1975
... service com- panies. Castings are made by three licensed foundries or are made from remelt stock. Applications: Journal or sleeve-bearings, thrust washers, seals, pistons, piston rings, pump parts, screw flights and components for nuclear power reactors. Manufacturer: Tribaloy Products E.I. du Pont de...