ANACONDA Alloy 260 nominally contains 70% copper and 30% zinc. This alloy is the most ductile of the brasses and also has fairly high strength; it is used in greater quantity than any other copper-zinc alloy. It takes its tradename (Cartridge Brass) from its use as the standard material for artillery and small-arms cartridge cases. It offers excellent-to-good resistance to corrosion in most environments. Its many uses include architectural, automotive, electrical, hardware, industrial, munitions, plumbing and wire applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-395. Producer or source: Anaconda American Brass Company.

ANACONDA Alloy 210 has a composition that imparts to it a slightly greater strength than copper, corrosion resistance about the same as copper, and an excellent resistance to stress-corrosion cracking. It has good hot-working properties and excellent cold-working characteristics. Among its many applications are coinage, munitions, novelties and a wide range of miscellaneous uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-406. Producer or source: Anaconda American Brass Company.

ANACONDA Alloy 330 is a low-leaded yellow brass that is produced only in tube form. It is both machinable and formable and it makes a utility tube that is suitable for a wide range of applications where corrosive conditions are not severe. Its uses include pump and power cylinders and liners, plumbing goods and munitions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-409. Producer or source: Anaconda American Brass Company.

ANACONDA Alloy 220 is a copper-zinc alloy having good formability and good resistance to dezincification and stress-corrosion cracking. Among the binary brasses it holds a favored position where product appearance is an important factor; it possesses a rich and pleasing bronze color. Among its many applications are architectural trim, cosmetics containers, hardware, munitions and miscellaneous. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-411. Producer or source: Anaconda American Brass Company.

Copper Alloy No. C61300 is a copper-aluminum-tin alloy. It is characterized by medium strength, medium ductility and a good capacity for being hot worked or cold worked. It has good resistance to corrosion. Its many applications include bolts, nuts, corrosion-resistant vessels, machine parts, piping systems, marine fasteners and blending chambers for munitions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-493. Producer or source: Copper and copper alloy mills.

Copper Alloy No. 330 is a brass containing nominally 0.5% lead. It has good machinability, excellent cold-working properties, and a wide range of uses including general purposes, industrial applications, munitions and plumbing. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-294. Producer or source: Brass mills.

Outokumpu 260 is commonly called cartridge brass, 70-30 brass, spinning brass, or spring brass. It is the most commonly used copper alloy and has a good combination of properties for forming plus a favorable cost comparison to other alloys. The alloy is often used in architectural, electrical, hardware, munitions, and plumbing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: CU-708. Producer or source: Outokumpu American Brass Inc.

Ansonia alloy C22000 is a 10% Zn alloy with the previous trade name of Commercial Bronze. It is bronze in color and often used in costume jewelry and ornamental trim. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-771. Producer or source: Ansonia Copper & Brass Inc.

Copper Alloy No. C33100 is a free-cutting tube brass. It has a good combination of mechanical properties. It has excellent solderability and good brazeability. Its uses include general-purpose screw-machine products, pump and power cylinders, plumbing accessories and primers in the munitions industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-517. Producer or source: Copper and copper alloy mills.

Ferrium M54 was designed to create a cost-effective, ultra high-strength, high-fracture toughness material with a high resistance to stress-corrosion cracking for use in structural applications. This datasheet provides information on composition, hardness, and tensile properties as well asfatigue. Filing Code: SA-822. Producer or source: QuesTek Innovations, LLC.

Mars 190 is a quenched and high tempered armor steel. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, and joining. Filing Code: SA-664. Producer or source: Industeel USA, LLC.

Austral Wright Copper Alloy 220 (UNS C22000), also known as 90/10 gilding metal, is a wrought copper-zinc alloy. It combines a rich golden color with the best combination of strength, ductility, and corrosion resistance of the plain copper-zinc alloys. It weathers to a rich bronze color and can be supplied in pre-patinated colors ranging from deep brown to green. Austral Wright Copper Alloy 220 has a lower rate of work hardening than the copper-zinc alloys with higher zinc content, such as alloys 260 and 272. This is an advantage in multistage pressing applications without interstage annealing. It has excellent deep drawing characteristics and resistance to pitting corrosion when exposed to severe weather and water environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-935. Producer or source: Austral Wright Metals.

MUELLER Alloy 3300 is a brass containing 0.5% lead for improving machinability. The lead detracts somewhat from its cold workability; however, despite the lead, cold workability is rated as excellent. Overall, the alloy has a good to excellent combination of machinability and cold workability. It has good resistance to corrosion by various atmospheres, saline waters and mild organic chemicals. Its uses include pump and power cylinders and liners, plumbing brass goods and plumbing accessories. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-425. Producer or source: Mueller Brass Company.

Alcoa Excalibar 6013 alloy has high strength, good machinability, and good corrosion resistance. It is easily joined by all welding and brazing methods, has excellent compressive properties, and has good applied coating acceptance. See also Alcoa Aluminum Alloy 6013, Alloy Digest Al-282, revised July 1988. This datasheet provides information on composition, physical properties, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-348. Producer or source: ALCOA Wire, Rod & Bar Division.

AMBRALOY 614 is an aluminum bronze with high strength and excellent resistance to corrosion in a wide range of environments. Also, it is rated as one of the most ductile of the strong and durable aluminum bronzes. Compared with tin bronzes which have been used since ancient times, aluminum bronzes have gradually become popular only since aliminum became commercially available about 85 years ago. Among its many uses are marine hardware, structural components and corrosion-resistant tanks and vessels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-437. Producer or source: Anaconda American Brass Company.

Type CN-7M covers a group of related complex iron-nickel-chromium-molybdenum-copper alloys that contain more nickel than chromium. The high nickel content together with molybdenum and copper give these alloys especially good resistance to sulfuric acid and many reducing chemicals. Among the alloys included in Type CN-7M, the so-called 20 alloy is produced in greatest quantity. The physical and mechanical property data herein are for the 20 alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-393. Producer or source: Various stainless steel casting companies.