LOCORE M43 is a cold-rolled, non-oriented electrical steel used primarily for alternating current (AC) and direct current (DC) motors, generators and transformers. It is produced either semiprocessed (the consumer anneals to produce the desired magnetic properties) or fully processed (the steel producer develops the magnetic properties to meet the maximum core loss values). This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-347. Producer or source: Republic Steel Corporation.

LOCORE M45 is a cold-rolled, non-oriented electrical steel used primarily for alternating current (AC) and direct current (DC) motors, generators and transformers. It is produced either semiprocessed (the consumer anneals to produce the desired magnetic properties) or fully processed (the steel producer develops the magnetic properties to meet the maximum core loss values). This datasheet provides information on composition, physical properties, microstructure, and elasticity. It also includes information on heat treating and joining. Filing Code: SA-353. Producer or source: Republic Steel Corporation.

INCOR 16 is a permanent-magnet material. It is an important tool for design engineers in many fields; in fact, it is a powerful extension to the design and product possibilities available with magnet technology. Incor 16 can be used to design motors that are smaller, lighter and more powerful. Microwave tubes can handle higher capacities. Magnetic drives and couplings can be made smaller and operated at higher torque levels. Electronic devices can be made more compact. Incor 16 can be used to lower size and weight in a wide range of other products where permanent magnets are used. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and machining. Filing Code: Co-77. Producer or source: Indiana General Magnet Products.

INCOR 18 and 21 are permenent magnet materials; they are closely related to Incor 16 (Alloy Digest Co-77, June 1981). Incor 18 and 21 are important to design engineers in many fields. They can be used to design motors that are smaller, lighter and more powerful than those made with conventional magnet materials. They also can be used to improve microwave tubes, magnetic drives and couplings and electronic devices. Incor 18 and 21, like Incor 16, can be used to lower size and weight in a wide range of other products where permanent magnets are used. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming and machining. Filing Code: Co-78. Producer or source: Indiana General Magnet Products.

Copper Alloy No. C18700 is a copper-base alloy containing lead (nominally 1.0%). The lead is added to impact free-cutting properties to the metal. Although the lead lowers the electrical conductivity of Alloy No. C18700 slightly below that of tough-pitch copper, it still has high electrical conductivity well within the limits needed for most current-carrying requirements. Typical uses comprise electrical motor and switch parts, electrical connectors and screw-machine parts requiring high conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-441. Producer or source: Copper and copper alloy mills.

ALUMINUM 518.0 is an aluminum die-casting alloy with an excellent combination of high strength and resistance to corrosion. It also has high ductility, good polishing characteristics, poor castability (it is hot short) and excellent machinability. Its uses include marine fittings, ornamental hardware, outboard motor brackets and ornamental automotive parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Al-242. Producer or source: Various aluminum companies.

CMI-C Magnetic Iron is a low-carbon magnetic iron especially processed with a critical strain for optimum uniformity. Maximum magnetic properties are achieved following suggested final anneal applied to fabricated parts. Its applications include electromagnet cores, plungers and pole pieces; generator and motor field frames; magnetic chucks; and chuck plates. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-75. Producer or source: Connecticut Metals Incorporated.

CARPENTER NIMARK 300 is a vacuum-melted, low-carbon nickel-cobalt-molybdenum maraging steel that develops yield strengths in excess of 270,000 psi (1862 MPa) by simple low-temperature aging at 900 F (482 C) following a solution anneal. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. Its many uses include aircraft structural assemblies, pressure vessels, shafting, bolts and fasteners, and rocket motor cases. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-423. Producer or source: Carpenter.

CUBE-ALLOY is a dispersion hardened copper recommended for high temperature electrical systems, such as motor windings, current carrying springs and welding electrode tips, where high electrical conductivity is required at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Cu-172. Producer or source: Handy & Harman.

G.110 is an 18% nickel alloy steel, possessing an excellent combination of toughness and ductility at yield strength levels of 250,000 psi. The strength developed is independent of mass effect and rate of cooling, and is achieved by a simple aging treatment. The alloy is recommended for applications such as rocket motor cases and accessories, bolts and fasteners and aircraft structural components- particularly landing gear. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, joining, and surface treatment. Filing Code: SA-225. Producer or source: Jessop-Saville Ltd, Brightside Works.

B and W IRON is a thoroughly killed, low carbon steel having a combination of ductility, toughness and high magnetic permeability. It is recommended for applications where good magnetic characteristics are of primary significance, such as in the manufacture of electric motor and generator housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-35. Producer or source: Babcock & Wilcox Company.

GMR-235 Alloy is a nickel-base, precipitation-hardening alloy available in investment cast form for high temperature service. It is recommended for gas turbine and jet engine components operating in excess of 1400 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-131. Producer or source: Licensees of the General Motors Corporation.

Republic RSM-300 alloy is an 18% nickel-cobalt-molybdenum age-hardening steel designed to develop up to 300,000 psi yield strength with good toughness. It is recommended for landing gears extrusion dies, rocket motor cases, high-strength bolts, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: SA-242. Producer or source: Republic Steel Corporation.

Hiperco 35 is an iron-cobalt type of soft magnetic material recommended for use in motors, generators, transformers and relays at temperature above 950 F. It yields the highest known saturation value of 24,500 gausses. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Fe-41. Producer or source: Westinghouse Electric Corporation.

INDALLOY is a sintered magnetic material recommended for permanent magnets in generators, motors and other electrical equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: Fe-22. Producer or source: Indiana General Corporation Magnet Division.

Hiperco 27 is an iron-cobalt type of soft magnetic material recommended for use in motors, generators, transformers and relays and at temperatures above 950 F. It is used for high flux levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Fe-26. Producer or source: Westinghouse Electric Corporation.

ArmaSteel is a cast ferrous alloy possessing the advantages of high yield strength, excellent wear resistance, and adaptability to selective hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on machining and joining. Filing Code: CI-7. Producer or source: General Motors Corporation.

BISBO is a pearlitic malleable iron readily cast in thick sections with consistently high mechanical properties. It has high yield strength, excellent wear resistance, and adaptability to selective hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating, machining, and joining. Filing Code: CI-17. Producer or source: Central Foundry Division, General Motors Corporation.

HIPERCO is a magnetic alloy having a high magnetic saturation value. It permits the design of motors with less metal for the same power, or more power from the same amount of metal. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Fe-13. Producer or source: Westinghouse Electric Corporation.

CDA C18700 is a copper-base alloy containing lead (nominally 1.0%). The lead is added to impart free-cutting properties to the metal. Although the lead lowers the electrical conductivity of CDA C18700 slightly below that of tough-pitch copper, it still has high electrical conductivity well within the limits needed for most current-carrying requirements. Typical uses comprise electrical motor and switch parts, electrical connectors and screw-machine parts requiring high conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-533. Producer or source: Copper and copper alloy mills.