Arc-Cast molybdenum bar, plate and sheet products are produced from carbon-deoxidized consumable-electrode, vacuum-arc ingots. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Mo-13. Producer or source: AMAX.

Wrought molybdenum products from pressed, sintered and rolled 99.95% molybdenum powder. This datasheet provides information on composition, physical properties, elasticity, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Mo-14. Producer or source: Climax Specialty Metals.

CLIMAX Specialty Metals molybdenum powder products range from 99.5 to 99.95% pure molybdenum. This datasheet provides information on composition and physical properties. Filing Code: Mo-15. Producer or source: Climax Specialty Metals.

ARC-CAST LOW CARBON MOLYBDENUM is a carbon-deoxidized molybdenum alloy produced from ingots consolidated by a consummable electrode vacuum-arc-casting process. This datasheet provides information on composition, hardness, and tensile properties. Filing Code: Mo-16. Producer or source: Climax Specialty Metals.

Wieland Duro Molybdenum is unalloyed molybdenum produced from pressed-and-sintered billets. Its unique combination of physical, mechanical, and chemical properties makes it ideal for exacting applications in the electronics, aerospace, nuclear, and metalworking industries. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: Mo-19. Producer or source: Wieland Duro GmbH.

VAN CHIP is a tungsten-molybdenum high-speed steel of the M-3 (6-6-3) type containing high carbon and high vanadium. This high carbon and high vanadium content combine to produce superior abrasion resistance for more difficult cutting operations. This datasheet provides information on composition and hardness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-16. Producer or source: Firth Sterling Corporation.

AISI 8740 is a medium-carbon, nickel, chromium, molybdenum alloy steel of the oil hardening type. It has good hardenability and desirable toughness. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-21. Producer or source: Alloy steel mills and foundries.

RYCROME is a chromium-molybdenum alloy steel heat treated to definite minimum mechanical properties. The combination of high tensile strength and good ductility give this alloy good shock and impact resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-8. Producer or source: Joseph T. Ryerson & Son Inc. (Distributor).

CROLOY 9M is a chromium-molybdenum alloy steel having very good corrosion resistance with good high temperature strength. It has good resistance to steam oxidation up to 1200 F and good atmospheric oxidation resistance up to 1300 F maximum . It is also tough and impact resistant. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-9. Producer or source: Babcock & Wilcox Company.

CIRCLE M is a molybdenum-tungsten high-speed steel containing 9.0% cobalt. It is adapted to high production applications where increased speeds and heavy cuts necessitate unusual red-hardness and wear resistance. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on forming, heat treating, and machining. Filing Code: TS-10. Producer or source: Firth Sterling Corporation.

AISI 4037 is a molybdenum steel combining moderate strength and great toughness in the heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-33. Producer or source: Alloy steel mills and foundries.

HY-TEN M is a triple alloy electric furnace steel recommended for parts requiring great hardness, density of structure, resistance to wear, and high strength combined with toughness. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-42. Producer or source: Wheelock, Lovejoy & Company Inc..

AUSTEMPERED DUCTILE IRON has high strength with excellent toughness and ductility. Its strength is twice that of conventional ductile irons, comparable to heat-treated wrought steels. Composition is balanced to provide foundry compatibility, minimal segregation and good response to austempering. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: CI-53. Producer or source: AMAX.

SAE 8637 is a triple-alloy steel. It can be hardened by quenching in oil or water; however, care must be exercised to prevent cracking in water hardening, especially if the work piece has sharp corners or drastic dimensional changes. This steel has moderate hardenability with relatively high strength and toughness. It is used in the quenching-and-tempered condition for a wide variety of components, parts and tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-418. Producer or source: Alloy steel mills and foundries.

CARPENTER NIMARK 250 is a vacuum-melted, low-carbon nickel-cobalt-molybdenum maraging steel in which yield strengths in excess of 240,000 psi can be developed by a simple aging treatment following a solution anneal. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-417. Producer or source: Carpenter.

AISI 4147 is a medium-carbon alloys steel with relatively high hardenability. It has good resistance to abrasion, fatigue and impact and is recommended for moderately severe service. It is an oil-hardening grade; however, it may be water hardened if suitable precautions are taken to minimize the danger of cracking during quenching. It has a relatively low tendency for the development of temper embrittlement during tempering in the range 850-1 100 H. Typical applications comprise gears, shafting, machine-tool parts, clutch parts and connecting rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SA-419. Producer or source: Alloy steel mills and foundries.

CARPENTER NIMARK 300 is a vacuum-melted, low-carbon nickel-cobalt-molybdenum maraging steel that develops yield strengths in excess of 270,000 psi (1862 MPa) by simple low-temperature aging at 900 F (482 C) following a solution anneal. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. Its many uses include aircraft structural assemblies, pressure vessels, shafting, bolts and fasteners, and rocket motor cases. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-423. Producer or source: Carpenter.

SAE 8655 is a triple-alloy steel that is normally hardened by quenching in oil; however, it may water quenched if sufficient precautions are taken with parts having drastic dimensional changes or sharp corners. Its good hardenability and resultant hardness and strength make it suitable for many tools and machine parts such as wrenches, shear blades, shafts, springs and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-424. Producer or source: Alloy steel mills and foundries.

AISI Type M42 is capable of being heat treated to Rockwell C 68-70; in fact, it is a super high-speed steel. Its combination of composition and properties makes it suitable for machining high-hardness alloys and difficult-to-machine superalloys. Excellent wear resistance and high hot hardness are obtained in Type M42 without loss of cuttting-edge toughness. Typical tools made from this steel are broaches, drills, gear cutters and milling cutters. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-476. Producer or source: Tool steel mills.

UNS H41370 is a low-alloy steel containing nominally 0.95% Cr and 0.20% Mo. It has good resistance to abrasion, fatigue, and impact. It can be nitrided successfully for maximum resistance to abrasion and wear. It is suitable for severe service characterized by high stresses and impact loading in both small and large sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-427. Producer or source: Alloy steel mills and foundries.