1-20 of 965 Search Results for

molding

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (1983) 32 (11): SS-435.
Published: 01 November 1983
... AL TECH MIAMI is both a hardenable stainless steel (AISI Type 420) and a tool steel for making molds for plastic. A major requirement for plastic mold steel is corrosion resistance. Certain plastics, such as poly-vinyl chlorides, are very corrosive and stored molds often rust from sweating water...
Journal Articles
Alloy Digest (1969) 18 (7): TS-221.
Published: 01 July 1969
... DURAMOLD N is a low-carbon, nickel-chromium type of plastic-molding die steel capable of developing a deep carburized case combined with exceptional core strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also...
Journal Articles
Alloy Digest (1989) 38 (7): P-6.
Published: 01 July 1989
... GRILON BT40X is an impact modified injection molding grade. It is an alloy between amorphous and semi-crystalline nylons. It offers a unique combination of toughness with high rigidity. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well...
Journal Articles
Alloy Digest (1989) 38 (8): P-8.
Published: 01 August 1989
... CELANESE NYLON 1000 is a general purpose Nylon 6/6 grade for injection molding. Nylon 1003 is a heat stabilized form of Nylon 1000, also for injection molding. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well...
Journal Articles
Alloy Digest (1990) 39 (1): P-15.
Published: 01 January 1990
... tensile properties ii f kby TACTIX 123 & TACTIX 138 Filing Code: P-15 RESIN SYTEMS Plastic JANUARY 1990 -DIGEST - DATA ON WORLD WIDE METALS AND ALLOYS PWbiWdby: AlOyD@t. lnC/ZOl-677-9161 27 Cankdd SlreeI. Orange. NJ. 07060 I U.S.A. TACTIX 123 & TACTIX 138 RESIN SYSTEMS (Resin Systems for Ik(uld molding...
Journal Articles
Alloy Digest (1990) 39 (2): Cp-6.
Published: 01 February 1990
... CELANESE nylons 1400, 1500, and 1600 are respectively 13, 33 and 43% glass fiber reinforced injection molding nylon 6/6 grades. Heat stabilized modifications (1403, 1503 and 1603) are also available. This datasheet provides information on physical properties, hardness, tensile properties...
Journal Articles
Alloy Digest (1979) 28 (8): SS-367.
Published: 01 August 1979
... Carpenter Stainless No. 2 Mold Steel is a 13% chromium steel ideally suited for long-run molding jobs. It is specifically used for protection against the following corrosive conditions: (1) Rusting of cavities when machines are shut down or molds are stored, (2) Rusting of mold cavities when using...
Journal Articles
Alloy Digest (1963) 12 (9): Al-129.
Published: 01 September 1963
... Aluminum C113 is an aluminum permanent mold casting alloy having good pressure tightness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information...
Journal Articles
Alloy Digest (1964) 13 (2): TS-143.
Published: 01 February 1964
... VASCO-MC is a medium carbon, chromium, molybdenum mold and cavity steel recommended for molds where good machinability and high surface finishes are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes...
Journal Articles
Alloy Digest (1964) 13 (3): Al-135.
Published: 01 March 1964
... ALUMINUM 138 is an aluminum permanent mold casting alloy recommended for applications where a combination of high hardness is as-cast condition, good casting characteristics and good machinability are required. This datasheet provides information on composition, physical properties, hardness...
Journal Articles
Alloy Digest (1964) 13 (6): Al-138.
Published: 01 June 1964
... by Engimeriqg luloys Digest. Inc. Upper Montclair. Nea J~#I ALUMINUM 333 (Permanent Mold Casting Alloy) Aluminum 333 is an aluminum-copper-silicon casting alloy recommended for high temperature applications requiring leak tightness. Composition: Copper Silicon Iron Manganese Magnesium Zinc Nickel Titanium...
Journal Articles
Alloy Digest (1957) 6 (1): Al-47.
Published: 01 January 1957
... ALUMINUM B195 is an aluminum permanent mold casting alloy recommended for applications requiring a combination of high tensile properties and good machinability. It responds to an age-hardening heat treatment. This datasheet provides information on composition, physical properties, hardness...
Journal Articles
Alloy Digest (1957) 6 (6): TS-59.
Published: 01 June 1957
... FORMA is a very low carbon carburizing steel recommended for cold hubbing of compression and multi-cavity molds for plastics. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-59...
Journal Articles
Alloy Digest (1957) 6 (7): Al-52.
Published: 01 July 1957
... All Q DIcEsT d -DATA ON WORLD WIDE METALS AND ALLOY! JULY 1957 5 ALCAN 350 (Aluminum Sand and Permanent Mold Pvblirbed by Engineering Alloys Digest, Inc upper Monrclair. New Jersey Casting Alloy) AICAN 350 is a lwe magnesium-aluminum casting a&y having high mechanical properties, excellent machina...
Journal Articles
Alloy Digest (1954) 3 (8): Mg-11.
Published: 01 August 1954
Journal Articles
Alloy Digest (1977) 26 (9): Zn-31.
Published: 01 September 1977
... pmd rn1111 m - DATA ON WORLD WIDE METALS AND ALLOYS -- j Pubbhed bu Jb9-ge-bh-& h Upper Mmti, New Jeney ZA-12 (Zinc-Base Sand and Permanent-Mold Casting Alloy) ZA-12 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. Its properties...
Journal Articles
Alloy Digest (1977) 26 (10): TS-326.
Published: 01 October 1977
... UHB IMPAX P20 is a chromium-nickel-molybdenum tool steel for molds. It is supplied in the prehardened condition, so that the mold cavity can be machined and the mold placed directly in service. It is used for molds for plastics and die-casting molds for zinc, lead and tin alloys. (See update...
Journal Articles
Alloy Digest (1978) 27 (8): SS-355.
Published: 01 August 1978
... BETHADUR 420 (AISI Type 420) is a 12.00 to 14.00% chromium stainless mold steel for plastics. Its good resistance to corrosion plus its working hardness level of Rockwell C 52 contribute to low maintenance costs for molds. This datasheet provides information on composition, physical properties...
Journal Articles
Alloy Digest (1982) 31 (1): TS-393.
Published: 01 January 1982
... AISI Type P20 is a chromium-molybdenum tool steel of medium carbon content. It usually is supplied in the prehardened condition (about 300 Brinell) so that the cavity can be machined and the mold or die placed directly in service; however, for some uses further treatments are employed...
Journal Articles
Alloy Digest (1982) 31 (5): TS-399.
Published: 01 May 1982
... a high-luster finish if carburized to the proper surface carbon content; the maximum carbon content is 0.50% for the die-casting dies and 0.80-1.00% for molds for plastics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well...