1-20 of 39 Search Results for

medical industry

Follow your search
Access your saved searches in your account

Would you like to receive an alert when new items match your search?
Close Modal
Sort by
Journal Articles
Alloy Digest (2021) 70 (5): Ti-178.
Published: 01 May 2021
... equipment. It also has numerous applications in the medical industry. Arcam Ti6Al4V ELI is very similar to Arcam Ti6Al4V, except that Arcam Ti6Al4V ELI contains reduced levels of oxygen, nitrogen, carbon, and iron. These lower interstitials provide improved ductility and better fracture toughness...
Journal Articles
Alloy Digest (2005) 54 (7): Ti-136.
Published: 01 July 2005
... Allvac Ti-15Mo is a metastable beta alloy melted in a vacuum arc remelting (VAR) furnace to minimize segregation. The alloy has a unique combination of properties and is used in the medical, chemical, and aerospace industries. This datasheet provides information on composition. Filing Code: TI-136...
Journal Articles
Alloy Digest (2005) 54 (9): W-28.
Published: 01 September 2005
... of small parts. SD 185 is a strong absorber of high-energy x-rays and gamma rays. The very high elastic (Young s) modulus of SD 185 rivals that of pure tungsten, but the alloy still retains machinability for fabricating into a variety of medical and industrial compo- nents. Possessing the highest density...
Journal Articles
Alloy Digest (2006) 55 (7): Ti-139.
Published: 01 July 2006
... Allvac Titanium Alloy 6Al-7Nb uses niobium to stabilize the beta phase. It is very similar to Ti-6Al-4V and is widely used in medical and surgical device applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well...
Journal Articles
Alloy Digest (1978) 27 (10): Bi-8.
Published: 01 October 1978
... CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder...
Journal Articles
Alloy Digest (2022) 71 (4): Co-144.
Published: 01 April 2022
... 1.0 1.0 1.0 1.0 0.25 0.25 bal bal (a) Nominal values unless indicated otherwise. (b) Maximum values unless indicated otherwise. Source: ASTM F1537:2011. (c) Denotes tighter than industry standards Physical Properties See Table 1. Mechanical Properties See Table 2. Table 1 Density and magnetic...
Journal Articles
Alloy Digest (2023) 72 (5): SS-1358.
Published: 01 May 2023
...); good dimensional stability during the aging treatment; excellent polishability; excellent corrosion resistance; no hard white layer after EDM; easy to process by AM technologies Applications Injection molds for corrosive plastics, rubber, and medical and food industry; plasticizing technologies...
Journal Articles
Alloy Digest (2007) 56 (11): Ag-13.
Published: 01 November 2007
... of DFT wire, cable, or ribbon. See Fig. 1. One of the more common uses of DFT wire is found in the medical device industry where designers have integrated the strength and Table 2 Typical Tensile Vales for MP-DFT Wire with a Silver Core Ultimate tensile strength 25% Ag 28% Ag 33% Ag 41% Ag % Cold work...
Journal Articles
Alloy Digest (2000) 49 (1): SS-774.
Published: 01 January 2000
... to that of AISI 420 and AISI 440C Applications: Injectible molds for corrosive plastics, rubber, and the medical and food industry; as extrusion dies; in plastic processing as screws, nozzles, and so on, and as engineering parts Producer: Uddeholm Corporation In Sweden: Rolling Meadows, IL 60008 Uddeholm Tooling...
Journal Articles
Alloy Digest (2005) 54 (12): SS-948.
Published: 01 December 2005
... and to meet the prop- erties required by the end user. Available thicknesses are 0.10 2.5 mm (0.0039 0.098 in Available widths are 5 380 mm (0.197 15 in Contact the producer for information on tolerances for special strip steels. Applications: This grade is mainly used for flapper valves, industrial knives...
Journal Articles
Alloy Digest (1989) 38 (3): P-1.
Published: 01 March 1989
..., hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting. Filing Code: P-1. Producer or source: Emser Industries. Producer or Source: Emser Industries Copyright © ASM International® 1996 1996 ASM...
Journal Articles
Alloy Digest (1992) 41 (4): P-34.
Published: 01 April 1992
.... Disposal in ap- proved industrial incinerators is suggested. Approved landfill disposal may also be used. STYRON resins are inert. do not readily degrade, will not contribute to landfill instability or evolve gases or leachates known to pollute water resources. General Characteristics: STYRON general...
Journal Articles
Alloy Digest (2021) 70 (4): Ti-177.
Published: 01 April 2021
... relieving. Due to the low modulus of elasticity of titanium, springback allowances are significant. Hot sizing Applications in the chemical industry; marine applications; after cold forming is often used to correct for variations in medical implants; medical, surgical, and dental applications; springback...
Journal Articles
Alloy Digest (2010) 59 (2): SS-1055.
Published: 01 February 2010
.../medical applications. CARPENTER CTS-40CP ALLOY (Martensitic Stainless Die Steel) CARPENTER CTS- 40CP ALLOY Chemical Composition, wt (Type Analysis) Carbon 0.95 1.20 Manganese 1.00 Phosphorus 0.04 max Sulfur 0.030 max Silicon 1.00 Chromium 16.00 18.00 Molybdenum 0.75 Iron bal Physical Properties: Density...
Journal Articles
Alloy Digest (2014) 63 (12): Co-124.
Published: 01 December 2014
..., this process involves a decrease of approximately 10% of the UTS compared to the coil form. Applications: Medical: prosthesis and fixation screws, pacemaker electrodes, vascular stent, vena cava filter, orthodontic, ancillary Aerospace industries: springs, torsion bar, gyroscope parts Naval equipment...
Journal Articles
Alloy Digest (2006) 55 (6): Co-111.
Published: 01 June 2006
... thermal treatment. After annealing with a rapid quench, the alloy has a face-centered cubic structure. Biocompatibility: Although there is no universally accepted definition for bio- compatibility of biomaterials, a medical device should be safe for its intended use. Conichrome alloy has been employed...
Journal Articles
Alloy Digest (2021) 70 (8): Cu-923.
Published: 01 August 2021
... industrial atmospheres. It is also resistant to industrial and (0.092) drinking water up to a flow rate of 1.5 2 m/s (4.92 6.56 fps); 20 °C pure water vapor; neutral saline solutions; non-oxidizing (68 °F) 47 min (81 min) For the annealed condition. (a) Source: C12200, Copper Development Association. (b...
Journal Articles
Alloy Digest (2015) 64 (9): SS-1224.
Published: 01 September 2015
..., and strip Typical Applications: Pulp and paper industry, chemical industry, medical applications, textile finishing, pharmaceutical industry, low temperature equipment, applications with high magnetic fields. Producer: Outokumpu Stainless Bar, Inc. Richburg, SC 29706, USA Tel: (888) 458-4600 Fax: (803) 789...
Journal Articles
Alloy Digest (2021) 70 (2): Cu-917.
Published: 01 February 2021
..., or halogens; hydrous Industrial Conductors, LP gas service, medical gas oxygen, ammonia and halogenated gases; hydrogen sulfide; and resistance welding equipment, tubing, welded tube. seawater, especially with high flow rates. Others Apparatus industry, applications requiring brazing Hot Forming or welding...
Journal Articles
Alloy Digest (1981) 30 (9): Bi-26.
Published: 01 September 1981
... INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses...