Search Results for mechanical properties

VDM 40 B is an austenitic iron-nickel-chromium-silicon-lanthanum alloy that is suitable for heating elements. It is characterized by excellent oxidation resistance, high resistivity, good sag resistance, and superior mechanical properties at high temperatures in comparison to other heating element alloys. VDM 40 B is less expensive than 60Ni, the traditional material for heating elements. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance, corrosion resistance, and surface qualities as well as forming and heat treating. Filing Code: SS-1366. Producer or source: VDM Metals GmbH.

ACO Eurobar EN-GJS-400-18C-LT is a ferritic spheroidal graphite cast iron that is produced by the continuous casting process. It has a minimum tensile strength of 400 MPa (58 ksi) and a minimum elongation of 18%. It has a tensile strength exceeding that of the highest-tensile-strength grade of gray cast iron, together with much higher elongation and impact resistance. It is specifically designed to provide good impact properties at low temperature. This datasheet provides information on physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as casting, heat treating, and machining. Filing Code: CI-109. Producer or source: ACO Eurobar GmbH.

Austral Wright C26000 (70-30 Brass) is a copper-zinc alloy. It has the distinctive clear bright yellow color normally associated with brass. Austral Wright C26000 possesses an excellent combination of strength and ductility. This grade is the most widely available copper alloy in the sheet form. It is often used where its deep drawing qualities are needed. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-944. Producer or source: Austral Wright Metals.

TD-NICKEL is a dispersion hardened nickel alloy offering high-temperature stability and useful mechanical properties virtually to the melting point of the base metal. It is easy to fabricate. It is capable of operating for long periods of time at high temperatures without degradation of mechanical properties. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-103. Producer or source: E. I. DuPont de Nemours & Company Inc..

POTOMAC M is a chromium-molybdenum-vanadium hot-work tool steel developed as a die material for aluminum-base die casting. Its superiority in pressure die casting is due to its excellent mechanical properties at elevated temperatures, its excellent machinability and its freedom from scaling and distortion during heat treatment. Its well-balanced high-temperature mechanical properties make it useful for many other applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-318. Producer or source: AL Tech Specialty Steel Corporation.

UNILOY 15-5 can be annealed (solution treated) to produce a martensite-austenite mixture and then aged to various levels of hardness and strength. It offers a broad range of mechanical properties. It is consumable remelted to improve cleanliness and mechanical properties. Normally, bars are supplied solution-treated (Condition A), machined very near to the finished dimensions and then age hardened. The many applications of Uniloy 15-5 include valves and fittings, gears, shafting, springs, and bearings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-434. Producer or source: Cyclops.

Sandvik APM 9980 is a low-carbon martensitic stainless steel with high mechanical properties. APM 9980 is a martensitic stainless steel specially designed for those applications requiring high mechanical properties combined with improved corrosion resistance relative to traditional martensitic steels. Note: This material is made by hot isostatic pressing of components. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1298. Producer or source: Sandvik Materials Technology and Sandvik AB Sweden.

P/M N690 exhibits isotropic mechanical properties and excellent corrosion resistance. Its high chromium content provides superior resistance to IGSCC. This alloy has superb weldability characteristics as well as minimal mechanical property degradation during extended exposure to elevated temperatures. This datasheet provides information on composition, microstructuretensile properties. It also includes information on corrosion resistance. Filing Code: Ni-439. Producer or source: Crucible Compaction Metals.

Aubert and Duval PER72 (NiCr18Co15TiMoAI alloy) is a precipitation hardening, nickel-base superalloy. The alloy is solid solution strengthened by additions of chromium, cobalt, molybdenum, and tungsten, while additions of titanium and aluminum provide precipitation strengthening. Aubert & Duval PER72 combines high strength with metallurgical stability as demonstrated by excellent impact strength retention after long exposures at elevated temperatures. It also exhibits good oxidation resistance, as well as excellent resistance to sulfide corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on low temperature performance, high temperature performance, and corrosion resistance as well as forming and heat treating. Filing Code: Ni-787. Producer or source: Aubert & Duval S.A. (a member of the Eramet Group).

Atlas 316 is a chromium-nickel-molybdenum austenitic stainless steel, second only to Atlas 304 in commercial importance. The molybdenum gives Atlas 316 better overall corrosion resistant properties than type 304 austenitic stainless steel, particularly higher resistance to pitting and crevice corrosion in chloride environments. It is readily brake or roll formed, welded, soldered, and cut by both thermal and mechanical methods. The austenitic structure gives excellent toughness, even down to cryogenic temperatures. Atlas 316L, the low carbon version of Atlas 316, is highly resistant to sensitization (grain boundary carbide precipitation) and so is extensively used in heavy gauge welded components; about 5 mm, 0.2 in., and over. Atlas 316H, with its higher carbon content, has some application at elevated temperatures, as does stabilized type 316Ti. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-1365. Producer or source: Atlas Steels.

Cleveland-Cliffs 18 SR is a ferritic stainless steel that is especially valuable for applications requiring high-temperature scaling resistance. Its properties, under cyclic conditions, are superior to those of types 409, 430, 304, 309, and 310 stainless steels. In addition, it is more economical than many of the stainless steels that are intended for high temperature applications. Unlike many of the straight chromium alloys, Cleveland-Cliffs 18 SR is readily welded by conventional methods. It is not subject to troublesome embrittlement or loss of corrosion resistance in the heat-affected zone. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low temperature performance, high temperature performance, and corrosion resistance as well as forming and joining. Filing Code: SS-1367. Producer or source: Cleveland-Cliffs Inc.

BRAKE DIE is a medium-alloy tool steel heat treated at the mill by oil-quenching and tempering to develop the best combination of properties. It is used for all types of dies on hand-operated and mechanically operated press brakes for the forming and bending of sheets, strip and other flat-rolled metallic and nonmetallic materials. It also will give good service in any application requiring wear resistance, toughness, high mechanical properties and good machinability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-302. Producer or source: Bethlehem Steel Corporation.

BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

AISI TYPE 410 is a hardenable 12% chromium stainless steel. It offers a wide range of mechanical properties and has good resistance to corrosion and oxidation. It can be hardened readily by austenitizing and air cooling. Among its many applications are knives, mechanical blades and other cutting tools for numerous corrosive environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-73. Producer or source: Stainless steel mills. Originally published April 1958, revised October 1985

ALLEGHENY STAINLESS TYPE 410 is a hardenable 12% chromium type of stainless steel. It has good resistance to corrosion and oxidation and offers a wide range of mechanical properties obtainable by heat treatment. It has such a high hardenability that it can be hardened readily by air cooling and it may be tempered at temperature up to 1350 F to produce high impact resistance. Among its many applications are knives, mechanical blades and other miscellaneous cutting tools for numerous corrosive environments. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-388. Producer or source: Allegheny Ludlum Corporation.

Wieland-SW1 is a lead-free special brass made in extruded and drawn products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-841. Producer or source: Wieland Metals Inc. and Wieland-Werke AG.

Alcan 5086 is used in the aerospace industry, particularly when good mechanical properties and outstanding corrosion resistance are required. This datasheet covers Alcan 5086 alloy in O and several H tempers as tubing. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, machining, and joining. Filing Code: AL-420. Producer or source: Alcan Inc.

NIMOCAST Alloy 80 is the casting counterpart of NIMONIC Alloy 80A (Alloy Digest Ni-10, May 1954). It may be used as as cast but develops optimum mechanical properties in the fully heat treated condition. NIMOCAST Alloy 80 is used for diesel engine precombustion chambers and for other high-temperature components. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-334. Producer or source: Inco Alloys International Inc..

TIMETAL 62S, because iron is used for the beta stabilizer in lieu of more expensive elements, has a lower formulation cost than most titanium alloys, yet the properties and processing characteristics of Ti-6A1-2Fe-0. 1Si are equivalent to or better than those of the workhorses of the titanium industry, including Ti-6A1-4V. The combination of reasonable cost and excellent mechanical properties make TIMETAL 62S a practical substitute for other engineering materials in numerous industrial applications that require low weight and high corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating. Filing Code: Ti-102. Producer or source: Timet.

UGI 4462 is a duplex ferritic/austenitic stainless steel that combines good mechanical properties and resistance to corrosion. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1149. Producer or source: Schmolz + Bickenbach USA Inc..